COMPREHENSIVE MAINT OF ADMIN BLDG AND GODOWNS AT CSD DEPOT AND PROVN OF NIGHT PICKET ROOM NEAR BLDG NO P80 AT BRICHGUNJ MIL STN AND SPL REP TO BLDG NO T-13 AT 15FBSU AND FOOTPATH AND RAIN SHED AT SEA VIEW ENCLAVE UNDER GE BRICHGUNJ

Amount

Surface dressing n exc 15 cm deep and getting out in hard/Dense Soil complete all as specified and as directed.

Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in hard dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50 m and depositing as directed complete all as specified and as directed.

Material and labour filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour treating the bottom & sides of excavation @ the rate of 5 litres of emulsion per sqm of surface area complete all as specified and as directed.

Material and labour for ATT on top of earth filling @ 5 litres/sqm complete all as specified and as directed.

Material and labour Hard core of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 10cm thick, watered and rammed to a true surface complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, including Removing L-type or J-type bolts in Roof Covering complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

All as per item No 13 here in before but exc 1.5 sqm but n. exc 4 sqm each.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed.

Demolition of PCC Block walling built in cement mortar complete all as specified and as directed

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down cement plaster on brick/stone or concrete surfaces including hacking for key , scrubbing down with water etc complete

Material and labour for 40mm thick Damp proof course in plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) to horizontal or vertical surface including necessary formwork complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified.

Material and labour for 75mm thick Plain Cement concrete (1:3:6) Type C1 (using 20mm graded stone aggregate) as in plinth protection and finished even and smooth with using extra cement.

Material and labour 75mm thick PCC 1:4:8 Type D-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for 25 mm thick Plain Cement concrete Type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 5 mm thick in one layer on concrete surface cement sand mortar 1:3 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:WPC will be measured and paid separately.

Material and labour for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:6, in walls, complete all as specified and shown on drgs.

Material and labour Plain Cement concrete 1:4:8 Type D-2(40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour pre-cast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed.

Material and labour precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

Use and waste of Formwork flat or curved to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Use and waste of Formwork flat or curved to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Material and labour Reinforced cement concrete (design mix M-30 grade) in Foundations footings, plinth beams, bases for columns, etc and mass concrete complete all as specified and as directed.

Material and labour Reinforced cement concrete (design mix M-30 grade) like Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour Reinforced cement concrete (design mix M-30 grade) Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as item No 35 here in before but 6mm to 8mm dia complete all as specified and as directed.

Supply and fix Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and as directed.

Supply and fix Bands, straps, supports or stays for rainwater pipe, ventilating pipes including bolts, if required hooks (stays), heavy, for large gates, hook and pintle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans, plain angle cleats, for securing purlins tow wood trusses or rafters, knee piece inserts, two way and three way straps, plates washers and similar articles confirming to Fe-290 Gde E-165 etc complete all as specified and as directed by Engineer in Charge.

Supply and fix Roof trusses using Fe 410 -W (GdeE- 250) qualityA (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Supply and fix for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed

Supply and fix for stainless steel Grade 316 mirror polished base cap of thickness 1mm for 50mm dia stainless steel pipe all as directed.

Material and labour for stainless steel of grade SS-316, mirror polished square, rectangular or circular pipe of different size for structural shed, balustrers and railing etc, including stainless steel arc welding and bright finishing by polishing with grinding etc and embedded firmly in concrete, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs of push pull type rolling shutters made with 1.00mm thick mild steel laths, without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick with cement plaster in CM 1 :4 on concrete surfaces mixed with WPC @3% by weight of cement shall be carried out all as specified and directed by the Engineer-in-Charge. Note: WPC shall be measured and paid separately

Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement over a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately

Material and labour rendering 10 mm thick on fair faces of concrete/block masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for preparation of new steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ,preparation of surfaces etc complete all as specified and as directed

Material and labour for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by engineer-in-charge.

Material and labour for oil bound distempering in two coats including complete removal of old decorated, plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

Material and labour for two coats of weather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces over a coat of primer including preparation of surfaces by complete removal of existing treatment of any description complete all as specified and as directed.

Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti-fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed.

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Material and labour for powder coated aluminium sections(Minimum thickness of powder coating 50 micron) for partitions, window and door with frame and shutters fully or partly glazed, side hung type (two numbers glazed and gauzed ) without sash bars , with panel inserts of sheet glass, gauzes including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, aluminium snap beading screws, aluminium fittings such as handles ,aluminium butt hinges aluminium tower bolts, the size of aluminium section shall be all as specified and as directed by engineering charge ( Notes: (i) Supply only panel inserts of glass / gauze will be measured and paid separately as supply only. (ii) Weight of aluminium sections only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips neoprene packing, fittings such as handles, butt hinges, tower bolts and fixing only of panel inserts of glass/ particle board/ guage, etc (iii) Weight of aluminium handles, butt hinges& tower bolts shall not be accounted for payment purpose).

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5sqm in each pane

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination fixed with aluminium beeding as in door panel .

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified.

Supply and fix as in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed

Supply and fix as in repairs aluminium, anodised, barrel tower bolt of extruded section, 100 mm long, complete all as specified and as directed by Engineer-in-charge.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

Supply and fix as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed by Engineer-in-charge.

Supply and fix as in repairs 100 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed by Engineer-in-charge.

Supply and fix as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed by Engineer-in-charge.

Supply and fix 150mm long extruded aluminium alloy anodised handles fabricated type, anodised all as specified and as directed.

Supply and fix Aluminium anodised butt hinges 100 mm long extruded aluminium, alloy with galvanised mild steel hinge pin, type C-22 complete all as specified and as directed

Supply and fix as in repairs Butt hinges, 75mm length extruded aluminium anodised alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified and directed by Engineer-in-Charge.

Supply and fix as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge.

Supply and fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy

Supply and fix as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium Die cast Body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

Supply and fix in repair shower arm 190mm long light body with wall flange & exclusive shower single flow with revolving ball joint, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Aluminium (extruded section) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Material and labour for ceramic coloured tiles, Non skid, area of each tile exc 0.18sqm and not exc 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in CM 1:4 all as directed.

All as per item No 82 here in before, but glazed ceramic tiles on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting

Material and labour for coloured glazed ceramic tiles, (300 x 200mm) x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including rendering 15mm thick in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Coloured glazed ceramic tiles joint free area exc 0.11 Sqm but exc 0.18 Sqm as in floor, set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:6, 15 mm thick, all as specified and directed

Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Material and labour for Dark coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick 1:4, complete all as specified and as directed by Engineer-in-Charge.

All as per item no 87 here in before, but on vertical surfaces including 10mm thick CM 1:3 as in backing coat of dado/Skirting complete all as specified and as directed

Material and labour for chequered cement concrete tiles 300 x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry, including screed bedding layer in cement mortar 1:6, 20mm thick, in flooring, complete all as specified and as directed.

Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 20mm thick CM (1:4) complete all as specified and as directed

Supply and fix Multi Rib TM profile high tensile 550Mpa yield strength colour coated Galvalume steel sheet 0.50mm (TCT) thicknesss as in roof and wall cladding having maximum pitch of 250mm C/C and miniumum 30mm crest depth in length as per site requirement fixed with self drilling/self tapping anti corrosive screws with EPDM seal complete all as per manufacturers specification and instruction as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed .

Supply and fix Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ ridge / valley gutter /cladding to wall, fixed with self-tapping screws all as specified.

Material and labour for water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non-woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturer’s instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment complete all as specified and as directed.

Material and labour for false ceiling with aluminium anodised snap grid frame work (Size of grid 605 mm X605mm) with 35X25X1.5 mm main Tee and 25X25X1.4mm, cross Tee and wall angle for false ceiling and suspended with 6 mm dia GI wire hooked to roof with needful adjustment upto 1.200 mm centre to centre staggered and board with eco board decorative type size 600X600X4 mm thick finished with two coats of oil bound distemper over a coat of primer complete all as specified and as directed by engineer in charge.

Supply and fix for Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and as directed

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Supply and fix in repairs 15mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix in PVC connections 15mm size with PTMT nuts of length 600mm

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

Taking up or down, 15mm dia bore, GI tubing, medium grade, including, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including removing from site, complete all as specified and as directed by Engineer-in-Charge

Material and labour for 15 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and labour for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and labour for 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/walls including jointing with solvent cement all as specified and directed by Engineer -In-Charge.

Supply and fix 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/walls including jointing with solvent cement all as specified and directed by Engineer -In-Charge.

Supply and fix PVC (SWR) bend 75mm dia any radius with complete all as specified and as directed by Engr-in-Charge.

Supply and fix PVC (SWR) bend 110mm dia any radius with complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed by Engineer-in-Charge

Material and labour for PVC 75 mm dia Nahani trap/floor trap with PVC grating complete all as specified and directed.

Supply and fix 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix 15 mm bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes in repairs all as specified and directed.

Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs for 20 mm dia bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fix 15 mm bore fancy type, chromium plated with long shank and cup (concealed type)e Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply and fix in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

Supply and fix in repairs for stop valves of 25mm bore dia of pipe, fancy type chromium plated, screwed down , high pressure, with crunch or butter fly handle, screwed both ends for iron pipe or for union and fixed.

Supply and fix in repairs CI bend 75mm dia access door branch piece, 75mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs CI bend 100mm dia with access door branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed by Engr-in-Charge.

Supply and fix cast iron nahani traps with CP grating incl jointing to waste pipe in run lead joint for 75mm dia out let, complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix vitreous China wash hand basin, 'OVAL TYPE' 550 mm including with single tap hole CP pillar cock of 15 mm dia brass CP chain and rubber plug , waste pipe and PVC connection.

Supply and fix of vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated, pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F vitreous China wash hand basin of 590 X 450mm (CAT no.324RHINE of make Neycer or equivalent of Parryware/Hindustan), including 15mm dia swan neck fancy type chromium plated pillar tap (Cat No.G0203A1, Make - Parryware), CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia, brackets, PVC connection 450mm long with check nut, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed.

Supply and fix vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ALD-CHR-593)

Supply and fix in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor.

Supply and fix rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for light /bell point controlled by one switch. Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. 2. Cost of cutting chases of girth 10cm and making good disturbed surfaces is deemed to be included in quoted rate.

All as per item No. 137 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable.

All as per item No.137 here - in - before but for 3 pin 5 Amps switch socket combination on independent board.

All as per item No.137 here - in - before but for 5 Amps Switch socket point on the same board controlled by one switch.

Supply and fix switch piano flush button single pole oneway 5 amp.

Supply and fix switch socket outlet 3 & 2 pin (multi pin) 5 amp flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal

Supply and fix lamp holder PVC body suitable for batten/Angle fittings.

Supply and fix sheet metal enclosure distribution board SPN, 4ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed complete.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. incl taking down old unsv light fitting.Make : Philips Cat No BN021 LED 25S 4000 PSU GR S1 or eqvt in make of Bajaj/Wipro.

Supply & fix LED holder type non dimmable bulb 10 watt complete all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN, 240 volts,10kA, 5 to 32 Amps, all as specified and as directed.

Supply and fix Wall mounting fan Sameera, electric driven single phase230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete all as per specified. Make Havells HSN code 8414 or eqvt in make of Bajaj/Wipro.

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth lead wire 4.0 mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe light grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, with 50mm thick RCC 1:2:4 B1 precast earth pit cover with 6Nos 8mm dia TMT bars both ways and test point terminal made of gun metal including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I all as specified and as directed.

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 core 6 sq mm all as specified and as directed.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers, bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked all specified and directed.

SK CONSTRUCTION

Priya construction

AMR TRADERS

T.THIYAGARAJAN