Construction of 120 single storied houses at Rama Krushna Leprosy Colony, Ward No. 41 of Bhubaneswar Municipal Corporation.

Earth work Excavation in all kinds of soil within intial lead and lift including rough dressing and levelling the ground etc. complete.

Filling sand in foundation well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge.

PCC in prop. (1:4:8) in foundation and bed using 4 cm size h.g C.B metal of approved quality and approved quarry including hoisting, lowering, laying concrete and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & p such as hire charges of concrete mixer, concrete vibrator required for the work etc complete as per the specification and direction of EI-C

Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete.

Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in Superstructure etc. complete

R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including Hoisting & laying (Data for 15 cum) but excluding the cost of M.S. rod. Column Footing

Plinth Bend

Column & Beam

Roof Slab

Lintel

Chajjaa

Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge.

12mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

16mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

Providing 6 mm thick cement plaster in CM (1:4) with neat cement punning over RCC surface finished smooth to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge.

Supplying fitting and fixing vetrified wall tiles (600mmx600mm) Colour/Printed premium grade having thickness 8m to 10mm tiles on 25mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cos of all materials, labour T&P etc required for the work all complete as per the direction of EIC

Fixing ceramic tile in Wall Or Dado with 12mm thick cement plaster (1:3) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles.

Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm (hk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/tipping as per drawing/design. The daor will be provided with all necessary fittings & fixtures, i.e. Baan Code- LKYPDC527), 125x75x3mm (code no- 7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer- in-Charge.

Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutter with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC..

Supplying , fitting , fixing up window ( sliding type) made up aluminum section 9778 as window frame section no.4095, 4096 and 9777 , 3994 as shutter frame with 5 mm thick black glass as penal fitted with rubber beading including locking arrangement and Aluminum Jally with frame including all fitting, cost of materials all taxes etc. complete as per direction of EIC by EIC..

Providing supplying MS grill made of MS angle, square bar and flat including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge.

Priming one coat with any approved cement primer including all cost , taxes , labour T & P with cost of primer etc.

Painting 2coats with weather coat over a coat of water bound cement primer and water based putty including all cost conveyance taxes and as per the direction of EIC etc complete

Finishing wall surface of walls with Acrylic wall putty (water based) of approved make & finished smooth & even surface to receive painting over a coat of primer with including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. Data for 10 sqm. Page - 236 of A/R - 2006 in other building item chapter.

Painting two Coats with Plastic emulsion paint

Providing & applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood /ply work including all cost conveyance taxes and as per the direction of

Painting two coat enamel paint over a coat of primer on new iron work with cost of primer and paint including all cost, taxes , labour T & P etc. complete.

Providing and laying 25mm thick grading concrete uing C.C. (1:2:4) including adding water proofing compound all materials & labour complete as per specification & direction of EIC

Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead (Data for 3.83Cum)

Dismantlling and removing R.C.C. columns beams slab, staircase landing, lintels including stacking the useful materials for re-use and removing the debries within 50mtr lead

Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete.

ROADWORK Earth work Excavation in all kind of soil in F&P within intial lead and lift including rough dressing and levelling the ground etc. complete.

Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete.

Filling sand in foundation well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge.

C.C (1:4:8) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of E-I-C (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by E-I-C.

Labou charge for Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , compacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge.excluding cost of 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete.

A- INTERNAL PH & SANITARYY WORK GPH Works: SuppÏyig all materals, labour, T&P and providng ”and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all ”complete as per specification and direction of the Engineer-in-charge. 15 mm PVC sch-80 pipes (Öriplast/Supreme)

20 mm PVC sch80 pipes (Öriplast/Supreme)

25 mm PVC sch80 pipes (Öriplast/Supreme)

40mm PVC sch80 pipes (Öriplast/Supreme)

supplying all materials, labour, T&P and cutting holes through existing brick work includi 9 Making good the damages in cement mortar (1:4) ! for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all !complete as per P.H. specification and direction of Engineer-in-charge. 250 mm thick wall Ground Floor

Supplying all materials, labour; T&P and cutting hole in R.C.C" floors,' roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and ! fittings etc and repairing the holes after insertion of pipes etc with' !cement concrete (1:2:4 ) including finishing complete so as to make leak proof as per direction of the Engineer-in-charge. Ground Floor

Supplying ali materials labour T&Pandcutting grooves inpucca floorsi ” and walls for taking G.I'./P.V.C! pipes and making good the damages as' per direction of the E.I.C. i) Ground Floor

Supplying all materials, labour T&P and ftting and fixing brass/CPU fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. a) Supplying all materials, labour, T&P and fixing standard sized two ways Bib cock of Hindware/Jaquar/Parryware of approved make etc' complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Ambika Delux

b- Supplying all materials, labour, T&P and fixing standard sized Bib, cock of Hindware/Jaguar/Parryware of approved make etc complete' including cutting the wail and making good the damages, including cost of all materials complete as per PH specifiaction as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib cock Ambika Delux

c- Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaguar/Parryware of approved make etc complete including cutting the wall and making good they damages, including cost of all materials complete as per PH’ specification complete as per direction of Er-in-charge. 15mm dia CP! angle stop cock with wall flange Ambika Delux i) Ground Floor

d- Supptying all materials, labour, T&P and fixing standard sized pillar coc k of Hindware/Jaquar/Parryware of approved make etc complete inchuding cutting the wall and making good the dam ages, including cost cf all materials complete as per PH specification and direction of Eng needing-in-charge. 1Smns dia brass pillar cock Ambika Delux

e) Fixing of 32nznl dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er r -charge 32miss dia brass or gun metal full wey valve (shakt‹make)

Fixing of 40mm dia Brass .* Gun izeta ball Valve confirming to IS 781-1995 of of approved wake as per specification complete as per direction of Er-in-charge 40mm dia brass or gun metal full way valve(shakti make)

15mm dia PVC connection pipe 450mm long

15mm dia CP Extention Nipple

Providing and fixing circular type sta› nless stee! jalli (grating) with hole for floor /nahani trap etc co volete as per specification and direction of 'he Eng beer un charge Ground Floor

Supplying aII materials, !abour T& P and fixing 100 mm dia waII mounted over head shower & Shower & shower arm hindware/ /Jaguar/Parryvvare incluuding cutting the wall and making good ihe damaoes, inc\ud ng cost of a\\ materials complete as per PH specification and direc!›o/ of End veer-in-charge. 100 mm dia CP overhead shower with arm Ambika Delux

Supplying aII materials, !abour T& P and fixing standard size 15mm dia concealed Stop Cock of Hinware/jaguar/ Paryware i incluuding cutting the wall and making good ihe damages, inc\uding cost of a\\ materials complete as per PH specification and direction of Er-in-charge. 15mm dia concealed Stop Cock Ambika Delux

Supplying aII materials, !abour T& P and fixing Health Faucet of Hinware/jaguar/ Paryware i incluuding cutting the wall and making good ihe damages, inc\uding cost of a\\ materials complete as per PH specification and direction of Er-in-charge. 15mm dia Health Faucet of Jaguar 1.2 Mtr long, 8mm diaAmbika Delux

Supplying aII materials, !abour T& P and fixing Roational Moulded polyethylene cylindrical vertical water storage tanks conforming IS:12701--1996 including cutting holes through the tank and fixing mild) steel ltubes and fittings and providing extra sockets and jam nuts, fixings !baIl valve etc, including hoisting up fo a height of 5 meters above aground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in !staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and .2.60mt. average length in cement concrete (1:2:4) using 12mm size, h.g.chips including centering and shuttering, watering, curing,' conveyance of all materials to worksite etc all complete as per. specification and direction of the Engineer-In-Charge. .1000 litre capacity water storage tanks in 1st floor ”

Supplying aII materials, !abour T& P and fixing U-PVC SWR soil waste ventilating pipes anf fittings of the folowwing diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of,approved rubber lubricant by non-heat application method/as per’ manufacturer's specification, testing, earthwork in excavation in ally kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. 110 mm Dia U-PVC SWR Pipes ( oriplasttype-A/Supreme)

110 mm Dia U-PVC door tee

110 mm Dia U-PVC offset

110 mm Dia U-PVC door bend

110 mm Dia U-PVC Plain shoe bend

110 mm Dia U-PVC Plain Vent cowl

110 mm Dia U-PVC P-Trap

110 mm Dia U-PVC Plain bend

Supplying all materials,labour T&P and cutting holels through exsiing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge. 250mm“to 375mm thick wall

Supplying all materials, labour T&P and and fixing 12.50 liters/10 iiters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as 'siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handIe,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet' and connceting the inlet pipe with suupply main etc all complete as per› the specification and direction of the Engineer-in-charge. 10 ltrs capacity PVC cistern with 32mm dia flush bend. Ambika

Supplying all materials. labour, T&P and fixing the following vitreous t" china Wash Down Water Closet (European type W.C. pan) of. Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including joint' the trap with soil pipe in cement mortar (1:1) fixing plastic seat and! cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per’ specification and direction of the Engineer-In-Charge. EWC with 'p' / S trap plain Hindware Cat No-20087 (S-10) Starwhite‘ type, size-57x35x39 cm, seat cover for Ambika Delux

Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S brackets painted white including cutting noles in walls and making pood the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of popes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure bettered ’Hot’ and ’Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 1Smm dia PVC Inlet connection pipe and making connecfon with pilar cocks and supply mains for cash basin, fi/ng 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge Ambika Delux i) Ground Floor

Supplying all materials. labour, T&P and fixing mirror of superior glass mounted on 6mm thick A C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. .600mmx450mm size B.E mirror (Alpina/Golden fish/Belgion

Supplying all materials, labour, T&P and fixtng standard size glass- shelf of Hindware/Jaquar/Parryware with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specitcaflon and direction ofthe Engineer?n-charge Ambika Delux Ground floor

Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24" of Hindware/Jaguar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge Ambika Delux Ground Floor

Supplying all materials,” labour, T&P and iixing standard sized Chromium Plated soap case of Hindware/Jaquar/Parryware complete with Chromium Plated brass brackets fixed to wooden plugs with’ Chromium Plated brass screws as per specification and direction of! the Engineer in charge Ambika Delux Ground Floor

EXTERNAL PH & SANITARY WORK Supplyig alI"materiaIs, labour, T & P and constructing Gully trap chamber off the following inside size with 8 cm thick R.C.C. precast icover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation 'concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly' Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. iall complete as per aproved drawing, specification and direction of Eng_ineer-in-charqe 250mmx250mm with RCCcover

Supplying all materials, labpue T&P and constructing Inspection Chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed , 1st class Fly Ash brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) usinf 12mm size h.g. chips , 12mm thick cement plastering (1:3) to outside, RCC cover slab in (1:2:4) usinf 12mm size h.g. chips with RCC man hole cover, eath work in excavation in al kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksitr, payment of royalty taxes etc all complete as per approved drawing specification and direction of EIC. Inside Size 760mmx760mmx450mm

Supplying all matetrials , labour, T&P and laying in trenches unplasticized PVC pipes conforming to IS : 4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non heat application methid/ as per manufacturers specification. Providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding sourrinding or encasing including concrete for bedding and curing etc all complete as per PH Specification and direction of EIC 110mm dia U-PVC pipes Class-3 (0.60mpa)

160mm dia U-PVC pipes Class-3 (0.60mpa)

Supplying all materials, labour, T&P and consiructing Man holes chamber of the following size with cement concrete (1:3:6) using 40: mm size HG metal on bed !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) twith punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around . the camber including watering, curing, conveyance of all materials to, worksite payment of royalty, taxes etc. all completed as per approved ,drawing, specification and direction of Engineer-in-charge. a) Inside size 900mmx900mmx900rnm

Supplying all materials, labour, T&P and making MS step iron in 20mm i diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Supplying aiI” materials, labours T&P ad laying in trenches ( to level or slope ) and jointing with provision of stiff mixture of cement mortar in proportion of 1.1 for salt glazed stoneware pipes, Grade—A of the following internal diameters including testing of pipes and joints complete. 110mm diameter UPC Pipe

S upplving all materials, iabour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of v eel steining precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips ,fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taXes etc al compete as per approved specification and direction of the Engineer-In-Charge a) RCC rings soakway pit 1 2m dia x 2 0m deep

Supplying all materials, labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS :8034/89 a. One no. 3 phase 3 stage head range 30 to 54 mtr. Discharge 155 to 200 LMP with outlate dia 32mm

Control Pannel

2.5 Sq rum cable.

40mm dia steel short piece

Steel rope wit cover.

Well Gap.

50mm size CI bracket.

Earth work up to 25 mtr.

Earth work up to 30 mm.

Earth work 30 to 50 mm.

5" ASTM pipe SCH-80

Delivery

Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL)

Group-A-LP- F.P- CBP-

Group-B-LP- F.P- CBP-

Group-C-LP- F.P- CBP-

Separate Point wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL)

Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) (Make - Cona/ Anchor/ Greatwhite)

Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 5pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (Make- Anchor/ Cona/ HPL/ Greatwhite)

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) (a) 2 x 2.5sq.mm + 1x1.5sq. Mm

Supply and fixing of following different DD DB BOX .(Make-Havells/ C&s/ L&T) (a) 4way SPN DD DB BOX.

Supply and fixing of 6Amp to 32A rating 240 V/415 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Havells/ L&T/ C&S).(a) 6 to 32 Amp SP MCB

S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .(Make - Cona/ Anchor/ Greatwhite)

Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard)(a) AC ceiling Fan.

S/F of Exhaust fan12" (Make - Havells/ Usha/ Crompton/ Almonard)

Supply and fixing of Metal body, wider lighting area,sleek design Bright LED source with uniform output and Surge protection of 2 KV with wide voltage protection 20W, 4 Ft LED Tube Light fitting (Make-Philips) as per the direction of Engineer-in-charge.

Supply and Fixing of Fan regulator. (Make-Cona/ Havells/ Anchor/ Bajaj)(a) Electronics step type

Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make- HPL/ Anchor/ RK/ Siemens/L&T/C&S)(a) 32Amp ICDP main switch with M.S board.

Supply and fixing of 15/20Watt CFL lamp (Philips/ Havells/ Anchor/Bajaj or equivalent make of reputed company only)

Supply and stringing of 1x35+1x25 mm2 LT x LPE AB cable with all accessories.

Supply & installation of 60 Watt LED fitting in the existing pole. (Make- E-Smart/ NEEV/ Crompton/ Bajaj/ Panasonic/ WIPRO/ Havells/ Philips/Surya or equivalent make of reputed company only)

Supply fitting fixing of 1 Mtr. GI 40 mm dia outstreach arm and 3 mm thickness including clamp nut and bolt etc. (As per direction of E-I-C).

Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required.

Supply & installation of electronic timer ON/OFF switch for automatic street light control with box (40/70 amp. Contactor) (Make-L&T).

Please Enable Macros to View BoQ information