CA No GE/H-27/2022-23 PROVN OF ADDL 05/15 AMP SWITCH AND SOCKETS IN ALL PANTRIES DEFI WALL MOUNTED FAN FOR VARIOUS WARDS AND OPDS AND COVERED SHED AT MNS CADET MESS OF AH RR UNDER GE E/M RR HOSP AT DELHI CANTT-10

Amount

Excavation in post holes in Hard/dense soil (or similar holes) each exc 0.5 cum, getting our, returing, filling in and remming earth of broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Demolition of brick work built in cement morter incl all quoins arches pillars etc complete all as specified and directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as sub base 100 mm thick finished cement concrete surfaces by broom finish complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick,over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in post, runners, rafters, purlins etc fixed with connecting plates including bending, welding etc complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces, over 10cm girth, applying two coats of cement base paint over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F 15 mm bore medium grade galvanised steel water tubing with all fittings concealed in wall or floor fixed to wall or laid in floors including taking up or down old tubing GI 15 mm bore complete all as specified and directed.

S&F of 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as specified and directed.

M&L for Ultra design cement concrete tiles of size 300x300x22 mm thick made in rubber moulding with white or coloured cement, as in floors including 15 mm thick cement screed in CM 1:6, set and jointed complete all as specified and directed.

S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame complete all as specified and directed.

M&L for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to E/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and directed.

M&L for cutting into existing manholes for inserting SWG / RCC pipe upto 150mm dia and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-I, smooth finished and reforming benching as required, complete all as specified and directed.

M&L for 150 mm bore reinforced concrete pipes, class NP2, laid and jointed with and incl collars, complete all as specified and directed.

Removal of malba/debris obtained from demoletion and lying around site up to distance of 5 KM from MOD land complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point controlled by one, one way switch 06 Amps.

All as per srl item No 20 here-in-before but one fan/ exhaust fan point controlled by one, one way switch 06 Amps

All as per srl item No 20 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per srl item No 20 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per Serial Item No 20 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

S&F LED tube light fitting 20 watt (CW) , 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser, PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

S&F tube light fitting 10 watt (CW), 2 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser, PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers with all connecting accessories. Note- PCC work, making round hole in wall suitable for 300mm size exhaust fan included in qouted rates complete all as specified and directed.

M&L of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground, earth pit not less than 2.25 Mtr deep and top edge of plate not less than 1.25 mtr below ground level and connected to GI earth lead wire 4 mm dia fixed by means of nuts bolts etc including light grade GI pipe 15 mm dia bore for protection of GI wire 4mm dia, connected to earth test point surrounded by packed alternative layers of charcoal and common salt 15 cm thick all around top and bottom complete all as shown in plate No 5 to the earthing test point all as specified and indicated including provn of PCC chamber 1:3:6 using 20mm graded stone aggregate, 50mm thick cover with RCC 1:2:4 type B-1 using 8 mm dia TMT bars @ 100 mm C/C both ways as in reinforcement, necessary excavation, earthwork, returning filling and testing on completion etc complete all as specified and directed.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in & including PVC surface casing and caping including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including PVC box of suitable size for one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch, and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, PVC box, screws, as applicable will be included in quoted rates.

All as per srl item No. 31 but with 2.5 Sq mm wire and one 3 pin, 16 Amps socket outlet point on independent board controlled by one, one way 16 Amps switch etc complete all as specified and directed.

S&F modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed

S&F modular switch, 16 Amps, single pole, one way, one module,230 volts AC complete all as specified and directed.

S&F modular socket outlet, 2 in 1, 6/16 amps 3 & 5 pin combined, 230 volts AC complete all as specified and directed.

Supply and fixing modular type fan regulator, stepped type 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts, duly ISI marked complete all as specified and directed.

Supply and fix Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified and directed.

All as per srl item No. 38 but of 08 way.

Supply & fix MCB 6 to 32 Amp, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed.

Supply and fix MCB, SPN type of 40 to 63 amps capacity, 240V, 10 KA with all connections complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as specified and directed. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and PVC conduit pipe will be measured as one unit.

Supply and fix in repair of Air Circulator fan 230 Volts single phase oscillating 450mm sweep suitable for wall mounting complete all as specified and directed.