Providing Aluminium Enclosures and Partitions at FRFCF project site, Kalpakkam

Amount

Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS: 1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS: 733 and IS: 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings, at all levels for a maximum height of 6m wherever required. (fittings, Glazing and panelling shall be paid for under relevant item) NOTE: 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Providing and fixing 12mm thick prelaminated with decorative lamination on both side, 3 layer medium density (Exterior grade) particle board Grade-1, Type - II confirming to IS: 12823 bonded with phenot formaldhyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, window shutters and partition frames with C.P. brass / stainless screws etc. complete as per drawings and as directed by Engineer-in-charge.

Providing and fixing IS: 3564 marked AI die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts "Everite Hardwyn" or approved equivalent make complete as per specification and as directed by the Engineer-in-charge.

Providing and fixing 4 Lever Dead /Mortice Lock 'Godrej/Everite' or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings.

Providing and fixing 150 x 200mm vision panel in door shutter using 4mm thick glass with teakwood lipping of 20x10mm size alround complete all as directed by the Engineer-in-charge.

Providing and fixing anodised aluminium tower bolts of size 300 x 10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing glazing with 6mm thick clear Float glass pane in aluminium doors, windows, ventilator shutters and partitions etc. with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-charge.

Providing and fixing Anodised Aluminium handles 125mm with 175 x 32mm including fitting with plate 175 x 32mm including fitting with necessary screws complete all as per specification and as directed by the Engineer-in-charge. Sample to be approved by the Engineer-in-charge.

Providing and fixing Swing type heavy quality top PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-charge.

Providing and fixing Swing type heavy quality bottom PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-charge.

Providing and fixing IS: 12817 marked stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) "GARG" or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-charge.

Supplying, providing and fixing approved Anchor fasteners / Cinch anchors of Carbon steel galvanised dash fastner (min 5 micron) of 10mm dia double threaded 6.8 grade counter sunk head screw comprising of polyamide PA 6 grade sleave size 10mm x 150mmat all places including drilling, scaffolding, materials, labours etc., for wall / floor all complete as per drawings, specifications and as directed by the EIC.

upto 10 mm dia

Providing and fixing reflective / non reflective type sun control polyester film 'Garware' or approved equivalent of required shade & colour, pasted to doors / windows glass as per requirement including cleaning the surface before and after pasting including required staging for a maximum height of 6m complete all as directed by the Engineer-in-charge

Providing and fixing Gypsum False ceiling Tiles, 600x600x9mm of Armstrong or approved equivalent make, pattern & design in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 170 gms/sqm) consisting or main "T" runner suitable spaced at joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all "T" sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.

Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment's/pipe and sleeves/penetration etc. Using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / sythetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.

Providing and fixing AI hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in-charge. Sample to be approved by the Engineer-in-charge.

A.BASHKAR

SMM ENGINEERING WORKS

T.P.MURUGAN TURNING AND WELDING WORKS

DAMU CONSTRUCTIONS