PROVN OF MAIN OFFICE SHELTER (OC OFFICE, MAIN OFFICE S/JCOs OFFICE) AT FRI UNDER DGRR WORK AND PROVN OF FIELD AMBULANCE PARKING SHED AT KIARI AREA UNDER GE 860 EWS

Amount

Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of cables/pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L Cement Concrete Type-B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (nominal mix) 1:2:4(using 20 mm graded crushed stone aggregate) in chajjas complete all as specified and directed by Engr-in-Charge.

M&L for formwork to Rough finished surfaces concrete chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engr-in-Charge.

S&F Mild steel TMT bars 10 mm dia and over Fe-410 W(Gde E 250) cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Pre-painted galvalume aluminum zinc coating GI based corrugated in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed by Engr-in-Charge.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250) complete all as specified and directed by Engr-in-Charge.

S&F Mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L PCC type C1 75 mm thick 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) as in Plinth protection laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engr-in-Charge.

M&L for Cement Concrete type D-2, 1:4:8 (using 20 mm graded crushed stone aggregate) 100mm thick as Sub base complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in floor Sub base complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) polished, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shed over 15mm thick screed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular), polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shed over 15mm thick screed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for colour glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat of CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

S&F for Factory made shutter 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.

S&F 30mm thick Second class hard wood Glazed and skeleton windows, ventilators open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in cement mortar 1:6 on brick or concrete surface etc. on walls and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick on fair faces of brick wall or cement concrete surface in cement mortar 1 :4 finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size extruded alluminium alloy with galvanised mild steel hinge pin type C-21 complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type, anodised 125 mm size complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm long complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint with one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall of any description and applying two coats of distemper oil emulsion, with one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for prepration of new wooden or wood based Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern) and trap white, including connection to drain (or outgoing pipe) and to flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc including 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and directed.

S&F Viterous China wash basin white flat back size 550x400mm including CP Pillar tap 15mm, CP Waste coupling 32mm size, PVC waste pipe 32mm bore 750mm long, pair of brackets of mild steel 35x35x6mm size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F Viterous China wash urinal, half stall type, white complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement incl 32mm dia PTMT waste coupling, 32mm dia PVC waste pipe and urinal spreader complete all as specified and as directed.

M&L for 1000 ltr cap Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F 16 mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UN stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threated polypropylene random fittings laid in wall/trenches etc complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UN stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threated polypropylene random fittings laid in wall/ trenches etc complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F PTMT waste grating doom with waste hole 100mm dia complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S&F floor trap of PVC 75 mm out let dia with grating and jointed to waste pipe complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long fixed complete all as specified and as directed.

S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F Aluminium extruded section Door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for plywood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 6 mm thick ( 5 Nos of ply) fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L for plywood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 4 mm thick ( 3 Nos of ply) fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sqcm n.exc 13 Sqcm secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Excavating over areas n.exc 1.5m deep and and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas exc 1.5m deep and n.exc 3.00 m deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-2 (Nominal Mix) using 40 mm graded crushed stone aggregate as in foundation filling mass concrete and similar work complete all as specified and as directed.

M&L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 ccomplete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and directed by Engr-in-Charge.

M&L for providing RCC type B-1 1:2:4(Nominal Mix) using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and directed by Engr-in-Charge.

M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slab for manhole set in CM 1:4 including necessary form work complete all as specified and directed by Engr in Charge.

M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I (2009) complete all as specified and directed by Engr-in-Charge.

M&L for loose filling with broken stone or boulders of gauge 80 to 150 mm in soakage pit, soakage wells complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and directed by Engr-in-Charge.

M&L Concrete bed 1:4:8 type D-2( using 40mm graded crushed stone aggregate) to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm complete all as specified and directed by Engr-in-Charge.

Supply only Integral Water proofing compound.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:3:6 100mm thick type C-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified and directed by Engr-in-Charge.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/laying of Inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete all as specified .

M&L for Providing, cement concrete in hold fasts, roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-Charge.

M&L for point wiring in casing in caping including all fittings with 1.5sqmm size multi stranded FRLS copper conductor cable including clamps , screws gutti/plug etc PVC unsheathed cable into and including PVC box for mounting of switces and PVC insulated FRLS cable of size 1.5sqmm as earth continuity conductor for followings items:-

One light point or one fan point controlled by one, one switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per Srl item No. 83.00 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

Description all as per Srl item No. 83.00 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

Description all as per Srl item No. 83.00 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing socket 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 9/12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED 12 Watt complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED round slim panel light 12W , 6500K all as specified and directed by Engr-in-Charge.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by the Engineer-in-Charge.

S&F DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

Supply and fixing MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge.

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in casing capping, grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original required complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion complete all as specified and as directed by Engineer-in-Charge.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 4 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge.

Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. Note :- Only punned thickness i.e 18cm shall be measured and paid.

M/S ZTECH (BID ID -3116827)

M/S GLOBAL ENGINEERS (BID ID -3119917)

M/S LEO TRADERS (BID ID -3115060)

M/S LIBE & CO (BID ID -3119600)

SUMEET TRADING CORPORATION (BID ID -3116744)

RISING SUN ENGG WORKS (BID ID -3118112)

N K BUILDERS (BID ID -3121515)