REPAIRS TO FLOORING RAILING AND STAIR CASE OF COMMON AREA OF BLDG AT OLD NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring, plinth protection and similar works finished even & fair without using extra cement.

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size area of each tile exceeding 0.11 sqm but no exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified.

Taking down cement plaster on brick or stone wall etc of any discription including racking out joints hacking for key scrubbing down with water.

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on walls in two coats, first coat 10mm thick & second coat 10mm thick mixed with water proofing compound finished fair & even complete all as specified. (Note: WPC will be measured & paid separetaly.)

Supply only integral water proofing compound.

M&L preparing new or old plastered surfaces of wall and applying two coats of weather proof acrylic based paint (100% Acrylic) exterior grade over a coat of primer including filling the cracks with Dr.Fixit crack free putty complete all as specified and as directed (Note : - Rates are incussive of provision and removal of steel scaffolding at any height. No extra cost to be paid for steel scaffolding)

M&L cement concrete 1:2:4 type B-0 using 12.50 mm gragded aggregate as in coping, kerbs ect and similar work including necessary formwork complete

Dismantling stone slab and tiles of any description or thickness laid dry or laid dry and pointed

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (Note : The rate includes the cost of cement plaster)

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations

M&L udaipur green/baroda green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffits etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete (Note : The rates included the cost of cement screed bed 10 mm thick)

M&L for taking out/removing vegitation growth or shrubs and injecting chemical GLYPHOSPHATE 41% SL 20 ML or till refusal by making cut/injection in the stem of plants 30 mm c/c and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with one lit of water) and removing the plants/vegitation growth completely dead, including necessary scaffolding, julas etc complete as per manufacturer of chemical Biostadtlndia Ltd or equivelent approved by GE.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165)

S&F 12 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete

Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer. (Make : Shalimar Paints)

Dismantling of AC ceiling board incl cover fillets.

S&F 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F for 4mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified.

Taking down chowkat or frame with shutters n.exe 1.50 sqm (without taking off shutter from frame) each.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge.

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m incl glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Make: Jindal / Hindalco/

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers & as specified.

Supply & fixing vitreous china WHB, white, size 550x400 flat back including brackets waste fittings 32mm dia chromium plated with long shank and fly nuts and 32mm dia PVC waste pipe (60cm long) all as specified. Make : Hindware / Parryware/ Cera or Equvelent.

Supply & fixing 10 litre capacity PVC low level flushing cistern (ISI marked), white syphonic action type valve less with inlet ball valve, float and handle complete including 32mm dia PVC flush pipe and 15mm bore PVC connection 30cm long with brass nuts and washer both side and connected complete all as specified. Make : Slimline / Commandor or equavelent.

Taking down chowkat or frame with shutters exe 1.50 sqm (without taking off shutter from frame) each.

P LAXMI AND CO.

Unitech Enterprises

Balaji Construction

MADHU ENTERPRIZES

BOB ENTERPRISES

ASHOK CONSTRUCTION

Nilesh Construction

SAHU AND SAHU CO.