COMPREHENSIVE MAINTENANCE TO KEEP DAY TO DAY MAINTENANCE AT 2003 STN UNDER GE AF GURGAON

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.Note the area includs in this up to 4th stories building

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from frame) exc 1.50 sqm and not exc 4.0 sqm complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from frame) n exc 1.50 sqm complete all as specified and directed

S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame all as specified and directed

M&L Glazed coloured ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed . (Notes : rates are inclusive of taking down doors/fittings and refixing it.)

M&L Non skid coloured ceramic tiles area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L Non skid coloured ceramic tiles area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L Non skid coloured ceramic tiles area of each tile exceeding 0.06 Sqm and n exc 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L 25 mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement.

M&L Machine cut Granite Stone Slab (Black in colour) 16-20mm thick, fixed on Kitchen Platform, Floor or on Shelves, laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed.

S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified.

S & F powder coated frame sections for doors and windows approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including any/all allied fittings (as in handle, lock, hinges etc) all as specifieda and directed

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

Taking up or down steel tubing 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S&F 15 mm CPVC bore tubes with all allied fittings and fixed complete to walls and ceilings or laid in floors.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and directed.

S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and directed.

M & L in repair for fancy type chromium plated hand shower (health faucet) with 18mm dia 1.20 m long(min.) flexible tube and wall hook complete all as specified and directed.

S & F in repair for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) of min size 350x475x390 with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin (min size 550x400mm), White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down single piece Water Closet Pan (Pedestal Pattern) of any size approved by the user/ Engr-In-charge with Trap and Fixing Bolts, and allied fittings and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces upto double storey plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (internal) 15mm thick in Cement Mortar 1:6 on Brick Walls/Concrete Surfaces upto double storey plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. Note the area includs in this up to 4th stories building

Supply only Looking Mirror 5.0 mm thick of ANY size fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L preparing old surface of wall and applying 2 mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of oil bound distemper on old surface of ceiling complete all as specified and directed.

M & L for new plaster surface applying two coat of oil bound distemper on ceiling surface with roller brush complete all as specified and directed.

M&L preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L preparing newly Plastered surfaces of Walls by applying Wall Putty 1 to 1.5 mm thick , cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing old Decorated/Treated Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying one Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.(Note : Each coat shall be measured separately.)

M&L preparing old Decorated/Treated Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying one or more(as required) Coats of plastic emulsion paint with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.(Note : Each coat shall be measured separately.)

Supply only 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and directed by Engineer-in-charge.

Supply only 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and directed by Engineer-in-charge.

Supply only 110 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed Note: WPC will be measured and paid separtely

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

Supply and fix Godrej pattern mild steel cup board with shutter made out of 1.00mm thick M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete including dismantling/taking down old chokhat with shutter of old cupboard (Only front face of cupboard to be measured) complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate), 40mm thick in Path/ Hardstanding in alternate Bay/Panel, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for concealed stop cock chromium plated adjustable wall flange for bathroom fittings all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise

M&L for refixing Factory Made Machine Pressed Pre-cast Concrete Coloured 60/80 mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment.( Except tiles)

M & L for 75 mm PCC 1:4:8 type D2 (Using 40mm graded stone aggt) as in subbase complete all as specified and dircted

M&L Factory Made Machine Pressed Pre-cast Concrete Coloured 60mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment all as specified and directed

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for exterior grade coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply only 50-80 mm Plain head, lost head, lath, mild steel wire nails, bright finished

Supply Only Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88 mm nominal shank dia) n. exc 50 mm long

Supply only Mild steel spikes, rose headed or dog spikes, 10 to 20 cm long

Supply only Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges

Supply only 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F Aluminium bosy Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Supply only Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

Supply only 9 mm Particle board, medium density, flat pressed, single layer type or three layer type, BWR grade

Supply only 12 mm Particle board, medium density, flat pressed, single layer type or three layer type, BWR grade

Supply only 18/19 mm Particle board, medium density, flat pressed, single layer type or three layer type, BWR grade

Supply only 4 mm Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on one face

Supply only 6 mm Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on one face

Supply only 9 mm Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on one face

Supply only 12 mm Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on one face

Supply only 9 mm Pre laminated particle boards interior grade one side laminated

Supply only 12 mm Pre laminated particle boards interior grade one side laminated

Supply only 19/20 mm Pre laminated particle boards interior grade one side laminated

Supply only 12 mm PVC board one side laminated

Supply only 18/19 mm PVC board one side laminated

Supply only White portland cement in jute bags or other packing

Supply only 30 mm flaps Continuous (piano) hinges,mild steel, bright finish or electrogalvanised

Supply only choona/chalk powder

Disconnecting existing tanks of 500 to 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Supply one Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

Supply only Vitreous China, semi-pedestal pattern (Anglo-Indian Type) (ditto)

Supply only vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

Supply Only Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

Supply only PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

Supply only Brass chromium plated shower rose 150 mm size with its allied accessories

Supply only Brass chromium plated shower rose 200 mm size with its allied accessories

Supply only Brass chromium plated shower rose 300 mm size with its allied accessories

Supply only Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

Supply only Vitreous Cliina wash basin, wliile, flat back, size 580x450irun excluding taps, waste, chain and plug and porcelain stopper but including brackets

Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Supply only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply only 500 ltr Plastic water tank, approved quality

Supply only 1000 ltr Plastic water tank, approved quality

Supply only PVC (SWR) pipes, single socketed, in any length , with rubber rings 110mm dia

Supply Only 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type and chromium plated

Supply Only 15 mm piller taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type and chromium plated

Supply Only 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed

Supply Only 15 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated

Supply Only 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply Only 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply Only 15 mm Elbows; brass both ends screwed and fixed

Supply Only 20 mm Elbows; brass both ends screwed and fixed

Supply only 4 mm Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane

Supply only oil puty

Supply only grey fillers for wood and iron

Supply only Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe)

Supply only any shape Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

Supply only precast RCC manhole cover of round/rectangle/square shape

Please Enable Macros to View BoQ information