Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹29.9 L+₹2.2 L (8.02%)Rejected-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹29.9 L+₹2.3 L (8.25%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹35.1 L
EMD Value
₹70,200
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_597438_1
8400-975/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
Yes
GE PANAGARH
₹70,200
Yes
13 Jul 2023
22 May 2023
20 Jun 2023
22 May 2023
19 Jun 2023
5 Jun 2023
Amount
Demolition of cement concrete (Unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above Ground level) and removing rubbish off the permises complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for including cutting of reinforcement and removing rubbish off the permises complete all as specified and as directed.
M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement including cement slurry and pointed in coloured cement to match the shade using coloured tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles laid over screed over and including bed or bedding layer of 15mm thick in CM (1:6) including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
All as per item No 4.00 mentioned here-in-above but as in skirtings/ dado over 10mm thick in CM (1:3) complete all as specified and as directed.
M&L for joint free glazed ceramic coloured tiles in vertical surfaces (250X350mm) 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM (1:3) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L vitrified light shade tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match the shade using coloured tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
All as per item No 7.00 mentioned here-in-above but as in skirtings/ dado over 10mm thick in CM (1:3) complete all as specified and as directed.
Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. including removing rubbish off the permises complete all as specified and as directed.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and as directed.
Supply only integral water proofing compound (liquid admixture) complete all as specified and as directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for 15mm thick in cement plaster CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and as directed.
M&L for 10mm thick in cement plaster (1:3) on concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified and as directed.
M&L for three coats of white wash as in ceilings on newly plastered surfaces including preparation complete all as specified and as directed.
M&L for two coats of oil bound distemper on walls over a coat of alkali resistant primer of newly plastered surfaces including preparation complete all as specified and as directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in cooking platform/shelf etc over 15mm thick Screed bed or backing coat for laying floor finishes in CM (1:6) complete all as specified and as directed.
M&L for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in slab supported on walls, shelves etc complete all as specified and as directed.
M&L for TMT steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for form work to soffits of suspended slab such as roof, floor and shelves and like for rough finished surface of concrete complete all as specified and as directed.
S&F urinal spreader CP fixing with 15mm dia pipe complete all as specified and as directed.
S&F sinks with draining board made of stainless steel 1mm thick kitchen with plug washers & wastes including bedding in cement mortar, fixing cantilever brackets & connecting union to pipe overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed. (Make : Prayag/Nirali/Bluestar)
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as directed by Engineer-in-Charge.
All as per item No.22.00 mentioned here-in-above but exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.
Taking down shutter of any description n.exc 1.0 Sqm each complete all as specified and as directed.
All as per item No.24 mentioned here-in-above but exc 1.0 Sqm and n.exc 4.0 Sqm each complete all as specified and as directed.
Resecuring or easinig and adjusting with out taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed.
Resecuring or easinig and adjusting with out taking down Shutters of any description n exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing complete all as specified and as directed.
S&F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet as per specification and drawing complete all as specified and as directed.
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaskey, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F factory made single extruded WPC (Wood Polymer Composite) wire gauzed i.e. panel will be wire mesh in lieu WPC , the wire gauze shall be warped on additional square 8mm MS Solid tube and this tube shall be welded to MS frame complete all as specified and as directed.
S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
S&F 300 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as directed by Engineer-in-Charge.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F 150mm long extruded aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and as directed.
S&F sheet glass 4.8/5 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each complete all as specified and as directed.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty/ beading in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as directed by Engineer-in-Charge.
Repairs to existing Aluminum doors including taking down if necessary, straightening of all damaged sections, refixing the frame and shutter in the same opening including repair/replacement of locking arrangement, hinges, door closer, handles etc complete all specified and directed by Engineer-in-Charge
Repairs to existing Aluminum windows including taking down if necessary, straightening of all damaged sections, refixing of frame and shutter in the same opening including replacement of locking arrangement, rollers etc complete all specified and directed by Engineer-in-Charge
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L for cement concrete tiles of size 30X30cm X25mm thick, with mixture of grey cement and pigments machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick cement screed CM (1:6) complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof ring/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
M&L for preparing old decorated surfaces of walls and applying one coat of white wash on walls complete all as specified and as directed.
M&L for preparing old decorated surfaces of walls and applying one coat of cement based paint on walls complete all as specified and as directed.
M&L for preparing old plastered surfaces and applying one coat of synthetic enamel paint on Concrete surfaces complete all as specified and as directed.
M&L for preparation of old painted surfaces and applying one coat of exterior emulsion complete all as specified and as directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Taking down of steel tubing 15mm dia of pipe and connections removal to store complete all as specified and as directed.
Taking down of steel tubing 20mm dia of pipe and connections removal to store complete all as specified and as directed.
Refixing of steel tubing 15mm dia of pipe and connections including cleaning for complete all as specified and as directed.
Refixing of steel tubing 20mm dia of pipe and connections including cleaning for complete all as specified and as directed.
S&F GI Tubes 15mm dia, medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F GI Tubes 20mm dia, medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with capstain head handle, screwed down fixed in repairs complete all as specified and as directed.
Supply and fix in repairs, pillar taps, 15mm dia , fancy type chromium plated screwed down high pressure with or with out lettered "HOT" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix in repairs, stop valves, 15mm dia, fancy type, screwed down, high pressure, screwed both ends for iron pipe or unions etc complete all as specified and as directed.
All as per above item No 65 but fancy type, two way chromium plated with long shank and cup (concealed type) complete all as specified and as directed.
S&F in repair gun metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F ball brass valves, 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified.
All as per item No 68.00 mentioned here-in-above but 25mm complete all as specified and as directed.
M&L for 32mm Waste fittings, brass chromium plated for sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and as directed.
M&L for 40mm Waste fittings, brass chromium plated for sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and as directed.
S&F in repairs 32mm Waste coupling of PTMT suitable for urinals (half or full threaded) (Minimum weight -45 gms) complete all as specified and as directed.
S&F in repairs Grating round 140mm size of PTMT complete all as specified and as directed.
S&F in repairs Grating round 140mm size of CP complete all as specified and as directed.
S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed.
S&F in repairs Brass chromium plated shower roses 125mm size complete all as specified and as directed.
S&F in repairs PVC soap dish complete all as specified and directed (Make:Prayag/Hindware/Parryware)
S&F in repairs PVC connection of 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.
S&F in repairs PVC connection of 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.
M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
M&L for urinal, bowl type or half stall pattern, basin only including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed.
S&F in repairs white Vitreous china pan "Orissa pattern" of size 580 mm x 440 mm with integral foot rests and "P" or "S" trap including provision of lime concrete bedding complete all as specified and as directed.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cisterWash down water closet (Pedestal pattern), complete all as specified and as directed.
S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm 1 PVC bib taps complete all as specified and as directed.
S&F in repairs PVC Washers for 15mm bib taps complete all as specified and as directed.
S&F in repairs spindle for 15mm bib taps complete all as specified and as directed.
S&F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.
Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as directed.
S&F in repairs internal assembly incl valveless syphon for 10 ltrs PVC flushing cistern complete all as specified and as directed.
S&F in repairs handle for 10 ltrs PVC flushing cistern complete all as specified and as directed.
S&F in repairs inlet ball valve for 10 ltrs PVC flushing cistern complete all as specified and as directed.
S&F in repairs float for 10 ltrs PVC flushing cistern complete all as specified and as directed
S&F in repairs down take pipe 32mm dia PVC flexible type for wash hand basin complete all as specified and as directed
S&F in repairs down take pipe 40mm dia PVC flexible type for sink complete all as specified and directed
S&F in repairs down take pipe 32mm dia PVC flexible type for s urinal/wash basin complete all as specified and directed
S&F in repairs down take pipe 40mm dia PVC flexible type for sink complete all as specified and directed
S & Fixed in repairs Towel rail, 60cm long including chromium plated brass screws and wooden/plastic cleats complete all as directed by Engineer-in-Charge
Supply and fix in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.
Supply and fix in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.
Supply and fix 75mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.
Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.
Supply and fix in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed.
All as per item No 102.00 mentioned here-in-above but 110mm complete all as specified and as directed.
S&F PVC (SWR) reducers 110mm complete all as specified and as directed.
S&F PVC (SWR) 'P' trap 125/110mm complete all as specified and as directed.
S&F PVC (SWR) 'P' trap 110/110mm complete all as specified and as directed.
S&F PVC (SWR) 'S' trap 125/110mm complete all as specified and as directed.
S&F PVC (SWR) 'S' trap 110/110mm complete all as specified and as directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with plain cement for 63mm complete all as specified and as directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with plain cement for 75mm complete all as specified and as directed.
M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM (1:4) on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for applying evenly a priming/tack coat with bituminous primer at 10 KG per 10 Sqm complete all as specified and as directed.
M&L for sand filling under sunken floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for PCC 1:5:10 Type E-2 (using 40mm graded stone aggregate) as in filling in Sunken floor complete all as specified and as directed.
S&F in repairs second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n.exc 200 cu cm each complete all as specified and as directed.
S&F first class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store complete all as specified and as directed.
S&F in repairs 100mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs 300mm long alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed.
S&F in repairs 250mm long alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed.
S&F in repairs mild steel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type, handles, cast type anodised complete all as specified and as directed.
S&F in repairs 100mm long extruded aluminium alloy handles, fabricated type,anodisedaluminium, handles, cast type anodised all as specified.
S&F in repairs gate and shutter, hooks and eyes100mm size aluminium plate type II complete all as specified and as directed.
S&F in repairs gate and shutter, hooks and eyes150mm size aluminium plate type II complete all as specified and as directed.
S&F in repairs Hasp and staple, aluminium anodised safety type with hinge pin incl bolt to hinge plate with screw 75mm size complete all as specified and as directed.
S&F curtain rod of 25mm dia SS, including SS decorative bracket and fixing brackets, etc as fixed in repairs complete all as directed by Engineer-in-charge
M&L for marble green work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and as directed.
Hacking out old broken glass (anyn thickness size quality or description) from wooden/ steel frame including beads/glazing putty complete all as specified and as directed.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in square n.exc 0.5 sqm in each panel (beads will be measured and paid under separate item) complete all as specified and as directed.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in square exc 0.5sqm in each panel (beads will be measured and paid under separate item).
M&L for Aluminium extruded Door closer hydraulically regulated,designation No. 1universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed in repair complete all as specified and as directed.
Supply only laths 1,5mm thick suitable to size of rolling shutter complete all as specified and as directed.
M&L for servicing of Coollapsibile gate including taking down if required, straightening of vertical guide channel, rollers, riveting where necessary including cleaning and greasing for smooth function complete all a specified and as directed
S&F in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate complete all as specified and as directed.
Taking down the Steel rolling including hood cover cleaning of complete parts of the rolling shutter, grassing and tightening all screws removing dents making straight of laths complete all as specified and as directed
Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
Ball bearing 450mm long for rolling shutters complete all as specified and as directed.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F mortice lock, brass vertical type, size 100 mm vertical type 4 lever complete all as specified and as directed.
M&L for repairs including cutting of over of hang steel window from frame and welding with box type steel hinges, straightening the shutter and refixing in old opening complete all as specified and as directed.
S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. (Make: Jaquar/Hindware/Cera/Parry ware)
S&F SS decorative bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and as directed.
S&F in repairs MS drapery curtain rod of 25 mm dia PVC coated including brackets complete all as specified and directed.
S&F wire netting of galvanaised steel wire 0.71mm dia and size of mesh is 12mm fixed properly with suitable nails for repairs of cracks at various locations in wall, beam, chajja, facia, slab and lintel etc including taking down plaster of cracked portion and cutting grooves for receiving wire mesh and making good the area by rendering in CM 1:3 and finally to match the surface and making good the surface with adjoining surfaces by applying white wash/OBD or cement based paint as applicable complete all as specified and directed by Engr-in -Charge
Cleaning of blockage in the floor/nahni traps in kitchen or bath room or sinks upto gully traps by manually or with water jet after carefully removing the old grating and refixing the grating in the same position including finishing with white cement complete all as specified and as directed by Engr-in-Charge.
M&L for Ply wood BWR grade type BB 12mm thick cutting in narrow pieces fixing with wooden beads in front of doors for arrestingthe reptiles complete all as specified and as directed.
Cleaning of blokage in the WC 'P' traps in toilets upto 1st manhole by manually or with water jet carefully removing the connected caps of pipe and refixing the same in the position complete all as specified and as directed by Engr-in-Charge. NOTE : The works/item mentioned at Sl item No 1.00 to 152.00:- Note 1:- The contractor or his representative will report in complaint cell with minimum one plumber, One carpenter and two helper to receive the complaints in the morning by 0900hrs with necessary daily stores as required to attend day to day complaints. The man power will have to increase depending on the number and urgency as decided by Engineer-in - Charge. Note.2 :- The contract will be made operational for 06 to 8 months. Note.3 :- The complaints should be attended /compete within 48 hours after receiving the complaint slip failing which a penalty of Rs. 250/- per complaint slip will be recovered from runing payment with out any prejudise and contractor shall not have any claim on this account Note No 4 :- The cost of plumber & carpenter should be deemed to be included in the item rates quoted by the contractor. Nothing will be paid extra for hiring the skilled labour.
NATIONAL CONSTRUCTION CO
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .