Renovation of Nawanshahr Canal Sub Division Office and Zilledar Office at Canal Colony Rahon Road Nawanshahr (labour Rates)

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent fillingaround masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Laying Cement concrete 1:4:8 with 40 mm gauge stone aggregate. mixing by mechanical means using concrete mixer volumetric type

1st class brick work in cement sand mortar in Foundation and plinth

Damp proof course 4cm thick of cement concrete 1:2:4 With water proofing compound as per manufactures guidelines

1st class brick work in cement sand mortar 1:5 in Super structure

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure.

Cold twisted deformed (Ribbed/ TOR Steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including biding & bending and placing in position complete.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Plastering on underside of ceiling 10mm thick cement plaster 1:3

Cement plaster 12.5 mm thick 1: 3(externel)

Cement plaster 12.5 mm thick 1: 4(internal)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt /Glosy/ Highly Gloss finish / Highlighter / emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing in position ChinawareEuropean type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat covercomplete in all respect and to the entiresatisfaction of Engineer-in-charge.

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.

Providing and fixing in position C.P. brass Foot operated auto closing valve for Basin taps and spouts (Table mounted)with two 900x1200mm long braided hoses with 15mm nuts of approved make (to the approval of Engineer-in-charge)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.

Providing & Fixing in position stop cock Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 20mm i/d

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.15mm i/d

Providing and fixing in position G.I. Tank Nipple of proved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.G.I. tank nipple 20mm i/d

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe 20mm i/d G.I. Union

Providing and fixing in position automatic brass Ball Cock in tanks.

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 110mm o/d pipe of 6 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 90mm o/d pipe of 6 Kgf. / sqcm

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Wiring light point

Wiring 3 Pin 6amp. Wall socket

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe (working pressure 2.5 kg / cm²) (ring fitted type-A) as per IS:13592 including jointing during masonry complete as per specifications and to the entire satisfaction of Engineer-in charge. (If fixed on wall face clamp to be paid separately as per respective item)

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank.

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc.complete in all respect

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shad

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 600x600 mm

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Dismantling brick work tile, masonry or tile lining Dismantling dry brick work

stripping and stacking of bricks

Dismantling brick work tile, masonry or tile lining in cement

Providing and laying 50 mm thick factory madecement concrete interlocking paver block of M-30grade machine made rubber moulded smoothfinish with strong vibratory process or with vibrohydrauliccompaction machine and of approvedsize and design / shape laid in Ordinary Grey andpattern over and including 40 mm thickcompacted bed of coarse sand, filling the jointswith fine sand etc, all complete as per directionsof Engineer-in-Charge for Non traffic Areas andstreets having width less than 3.05 mt.

Providing and fixing vitreous chinawarepedestal of approved make (to the approval ofEngineer-in-charge) for wash hand basincomplete in all respect.Vitreous chinaware standard whitepedestal for wash hand basin.

HIMMAT GROUP OF CONSTRUCTION & ENGINEERING