Balance work for Construction of PHC building Plassi in District Kathua Under NABARD

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms including getting out the excavated earth and disposal of surplus excavated earth as directed by Engineer-in-charge, incl. all leads and lift. a) All Kind of soil.

Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (including all leads and lifts carriages of material by MT/HL)

a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size).

b) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 20% boulders

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centring shuttering, finishing and reinforcement. a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings frames, guard bar, ladder, railings, brackets, gates and similar works. (including all leads and lifts carriages of material by MT/HL).

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). (including all leads and lifts carriages of material by MT/HL).

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) and curing complete (including all leads and lifts carriages of material by MT/HL).

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10 sqm).

Painting two or more coat with approved paint of synthetic enamel to given an even shade (excluding priming coat).

Surface dressing of ground including removing unequalities and disposal of rubbish outside the periphery of area 50 mtr.

Providing and fixing 75mm thick interlock precast cement concrete tiles M-30 grade over 50mm thick crusher dust or dry sand and joints to be filled by crusher dust or dry sand including watering (complete job).

Centring and shuttering including strutting, propping etc.and removal of form work for

a) Foundation, footings, bases of columns etc. for mass concrete

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 76.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Kathua for an average lead of 76.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 76.00 Km. by M.T. d) Stones / boulders from Lohai nallah for an av. lead of 11.00 km. by M.T.

Romesh Chander

balwant singh

DEEp KUMAR

vishal chopatia

Anju Devi

Joginder Singh