REPAIR TO FOOTPATH, HARD STANDING AND FENCING AT 3 AFSR, SITE C, NKP, 11 ASC, 8LU AND MES AREA UNDER GE(AF) BORJHAR

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed.

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM (1:6) etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge

M&L for 100mm thick PCC Type C-1 1:3:6 using 20 mm graded stone aggregate as in plinth protection & footpath complete all as specified and directed.

M&L fo sand cushioning for laying interlocking paver block complete all as specified and directed.

M&L for Prepolished Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 grade (with grey cement and pigment ) complete all as specified and as directed.

M & L PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick PCC Type C-1 1:3:6 using 20 mm graded stone aggregate as in plinth protection & footpath complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes completeall as specified and directed.

M&L for prepilished chequered cement concrete tiles with grey cement & pigment 30cmx30cmx22 to 25 mm thick, set jointed and pointed in neat cement slurry in floors above 15mm thick screed bed complete all as specified and as directed.

Dismantling old Chain link fencing of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all specified and as directed

Dismantling RCC posts or struts (wood steel or RCC) any section embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed. Note : Dismantling of existing galvanized iron steel barbed wire / Chain link fencing shall be measured & paid for separately.

M&L for PCC (1:3:6) type C2 using 40mm graded aggregate in foundations, filling and mass concrete for fixing angle iron post etc all as specified and directed.

S&F mild steel work confirming to Fe 290 Gde-E-165 in posts & struts in swan neck angle incl cutting top to shape s directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or riveting etc complete all as specified and as directed.

Supply only 4mm dia PVC coated MS galvanised chain link fencing of mesh size 50mm x 50mm complete all as specified and as directed. Note : Colour of PVC coating shall be as approved by GE

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed

S&F for flat iron fillets for securing chain link / wire mesh incl all necessary drilling, bolting or riveting etc, confirming to Fe-290, Gde E-165all as specified and as directed

S&F in repairs concertina coil 600mm dia fixed over security wall on existing angle iron frame work complete all as specified and as directed

M&L mild steel Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut (dia of neck 10mm and 10cm long) complete all as specified and directed.

M & L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome completeall as specified and directed.

M/s JRS Associates

M/S RUPDEEP ENTERPRISES

M/s Nice Traders

M/s A R Traders

M/S Kiran Chandra Das

Ms Jahnabi Construction

M/s Beekey Seekey Traders