Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹32.8 LAccepted-AOC D 35 NEAR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | NEW DELHI | WEST DELHI | DELHI | 110064 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹33.4 L+₹53,351.37 (1.62%)Rejected-Finance FLAT NO 151 BLOCK NO 1 DIAMOND SQUARE CGHS LTD PLOT NO 13A SECTOR 6 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹35.3 L+₹2.5 L (7.57%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹36.3 L+₹3.4 L (10.4%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NORTH | DELHI | 110006 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹42.2 L+₹9.3 L (28.3%)Rejected-Finance GROUND FLOOR F 11 PHASE II MAYAPURI WEST DELHI DELHI 110064 | DELHI | WEST DELHI | DELHI | 110064 | 5 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | m/s rudraksh enterprises L1 | M/S Anand Enterprises L4 | S.R. Constructions L3 | AMIT ENTERPRISES L5 | BRIJ MOHAN LAL AND CO. L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and fixing electric water heater (geyser), storage type with inner tank with glass lined coating and heating element heavy duty 2 KW capacity 25 litre, BEE 5 Star rated Engineered for hard water complete with all accessories such as pressure safety relief valve, thermostat, NRV, connection piece (steel armoured - 02 Nos) etc conforming to relevant latest IS including anchor fasterner - 04 Nos complete all as specified and as directed. Make:- Bajaj Shield Series Immorto, Crompton Amica Pro 25-L, Havells Greta Pro 25L or equivalent as per list of makes. | 90 | Each | 7,400 ₹6,66,000 | 7,950 ₹7,15,500 | 8,500 ₹7,65,000 | 8,000 ₹7,20,000 | 7,182 ₹6,46,380 Lowest |
| 2.00 | Supply,installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B 03 Nos blades, 30 cm long down rod, 2 nos canopies, shackle kit, copper winding, power factor not less than 0.9, Service value (CMM/W) minimum 6.00, Air delivery minimum 210CMM, 350RPM (tolerance as per IS : 374-2019), THD less than 10%, with remote unit for speed control and all remaining accessories including safety pin, nut, bolts, washers, temperature rise +75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v 50Hz, single phase AC supply, earthing connection etc. complete all as specified and as directed. Make:- Bajaj Energos12DC5R, Havells 1200DC30w350, Crompton Energion Regmote or equivalent as per list of makes. Note:- The Contractor shall provide repacement warranty from OEM of fan for 03 years. | 310 | Each | 2,540 ₹7,87,400 Lowest | 2,998 ₹9,29,380 | 2,950 ₹9,14,500 | 2,700 ₹8,37,000 | 2,629 ₹8,14,990 |
| 3.00 | Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300mm sweep, 1350 RPM with blades, and frame and louvers conforming to relevant latest IS including anchor fasterner -04 Nos complete all as specified and as directed. Make:- Bajaj Maxair, Crompton Greaves Trans Air, Havells ventil air DB 300 or equivalent as per list of makes. | 100 | Each | 1,895 ₹1,89,500 | 1,980 ₹1,98,000 | 1,800 ₹1,80,000 | 1,900 ₹1,90,000 | 1,654 ₹1,65,400 Lowest |
| 4.00 | Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 450mm sweep with blades and frame and louvers heavy duty conforming to relevant latest IS including anchor fasterner -04 Nos complete all as specified and as directed. Make:- Crompton EXHD450, Almonard, Havells Turbo force or equivalent as per list of makes. | 10 | Each | 4,344 ₹43,440 | 4,200 ₹42,000 | 3,200 ₹32,000 | 2,100 ₹21,000 Lowest | 5,771 ₹57,710 |
| 5.00 | M&L for stickers/radium strips for ceiling/exhaust fan & geysers on front face printed with SM/MES Numbers including preparation of surface complete all as specified and as directed. | 510 | Each | 20 ₹10,200 | 30 ₹15,300 | 25 ₹12,750 | 11 ₹5,610 | 5 ₹2,550 Lowest |
| 6.00 | Dismantling & taking out carefully existing ceiling fan of any size and removing the old fan rod and deposited to MES store yard and supply & fixing new Anti suicide rod/smart fan rod of length 12" any colour to match with the existing having following specifications :- (i) Thickness of rod=1.84( + 0.05)mm on zinc plated MS pipe with zinc plated spring mechanism (ii) MSME tested for 15 Kg weight bearing capacity & breaking at impact load more than 22 Kg (iii) The fan rod opens from its centre & spring hidden in pipe, expands to land on ground safely complete all as specified and directed. Make:- GOLD LIFE or equivalent as approved by the GE. | 115 | Each | 385 ₹44,275 | 495 ₹56,925 | 20 ₹2,300 Lowest | 70 ₹8,050 | 422 ₹48,530 |
| 7.00 | M&L for aluminium strip of size (25 x 3.15)mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. | 30 | RM | 120 ₹3,600 | 150 ₹4,500 | 80 ₹2,400 | 10 ₹300 Lowest | 150 ₹4,500 |
| 8.00 | M&L for air termination, single pointed aluminium rod 12mm dia and 300mm long including fixing on GI pipe and necessary welding etc complete all as specified and as directed. | 8 | Each | 800 ₹6,400 | 120 ₹960 | 320 ₹2,560 | 500 ₹4,000 | 75 ₹600 Lowest |
| 9.00 | Material and Labour in replacement of test point terminal block made of gun metal or phosphorus bronze size (75 x 75 x 25)mm drilled and screwed including 3 nos. 8 mm dia 25mm long hexagonal head screw complete all as specified and as directed by Engr-in-Charge. | 2 | Each | 1,400 ₹2,800 | 400 ₹800 Lowest | 550 ₹1,100 | 2,000 ₹4,000 | 650 ₹1,300 |
| 10.00 | M&L for earthing in replacement with galvanized mild steel earth plate electrode (60cm x 60cm) x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 mtrs below ground level connected to GI strip (32 x 6)mm as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) (1:3:6) type C-1 (using 20mm graded stone aggregate), with fair finish internal surface of concrete chamber and 15mm thick cement plaster in CM (1:4), funnel with wire gauge mesh, 80mm thick RCC pit cover 320mm x 320mm of RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) reinforced with XPM, Jalli and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed by Engr-in-Charge. | 2 | Each set | 5,000 ₹10,000 | 2,400 ₹4,800 | 3,500 ₹7,000 | 5,000 ₹10,000 | 2,250 ₹4,500 Lowest |
Tender Value
₹45.5 L
EMD Value
₹91,000
Closing Date
22 Jan 2026, 6:00 pmClosed
GE (AF) PALAM DELHI CANTT 10
GE (AF) PALAM DELHI CANTT 10
SPECIAL REPAIR / REPLACEMENT OF BER CEILING FANS, EXHAUST FANS AND GEYSERS AND CERTAIN MINOR WORKS AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10
2026_MES_746811_1
8025/A/T-75/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT 10
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) PALAM DELHI CANTT 10
₹91,000
Yes
14 Mar 2026
1 Jan 2026
29 Jan 2026
1 Jan 2026
22 Jan 2026
15 Jan 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and fixing electric water heater (geyser), storage type with inner tank with glass lined coating and heating element heavy duty 2 KW capacity 25 litre, BEE 5 Star rated Engineered for hard water complete with all accessories such as pressure safety relief valve, thermostat, NRV, connection piece (steel armoured - 02 Nos) etc conforming to relevant latest IS including anchor fasterner - 04 Nos complete all as specified and as directed. Make:- Bajaj Shield Series Immorto, Crompton Amica Pro 25-L, Havells Greta Pro 25L or equivalent as per list of makes. | 90 | Each | - | - |
| 2 | Supply,installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B 03 Nos blades, 30 cm long down rod, 2 nos canopies, shackle kit, copper winding, power factor not less than 0.9, Service value (CMM/W) minimum 6.00, Air delivery minimum 210CMM, 350RPM (tolerance as per IS : 374-2019), THD less than 10%, with remote unit for speed control and all remaining accessories including safety pin, nut, bolts, washers, temperature rise +75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v 50Hz, single phase AC supply, earthing connection etc. complete all as specified and as directed. Make:- Bajaj Energos12DC5R, Havells 1200DC30w350, Crompton Energion Regmote or equivalent as per list of makes. Note:- The Contractor shall provide repacement warranty from OEM of fan for 03 years. | 310 | Each | - | - |
| 3 | Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300mm sweep, 1350 RPM with blades, and frame and louvers conforming to relevant latest IS including anchor fasterner -04 Nos complete all as specified and as directed. Make:- Bajaj Maxair, Crompton Greaves Trans Air, Havells ventil air DB 300 or equivalent as per list of makes. | 100 | Each | - | - |
| 4 | Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 450mm sweep with blades and frame and louvers heavy duty conforming to relevant latest IS including anchor fasterner -04 Nos complete all as specified and as directed. Make:- Crompton EXHD450, Almonard, Havells Turbo force or equivalent as per list of makes. | 10 | Each | - | - |
| 5 | M&L for stickers/radium strips for ceiling/exhaust fan & geysers on front face printed with SM/MES Numbers including preparation of surface complete all as specified and as directed. | 510 | Each | - | - |
| 6 | Dismantling & taking out carefully existing ceiling fan of any size and removing the old fan rod and deposited to MES store yard and supply & fixing new Anti suicide rod/smart fan rod of length 12" any colour to match with the existing having following specifications :- (i) Thickness of rod=1.84( + 0.05)mm on zinc plated MS pipe with zinc plated spring mechanism (ii) MSME tested for 15 Kg weight bearing capacity & breaking at impact load more than 22 Kg (iii) The fan rod opens from its centre & spring hidden in pipe, expands to land on ground safely complete all as specified and directed. Make:- GOLD LIFE or equivalent as approved by the GE. | 115 | Each | - | - |
| 7 | M&L for aluminium strip of size (25 x 3.15)mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. | 30 | RM | - | - |
| 8 | M&L for air termination, single pointed aluminium rod 12mm dia and 300mm long including fixing on GI pipe and necessary welding etc complete all as specified and as directed. | 8 | Each | - | - |
| 9 | Material and Labour in replacement of test point terminal block made of gun metal or phosphorus bronze size (75 x 75 x 25)mm drilled and screwed including 3 nos. 8 mm dia 25mm long hexagonal head screw complete all as specified and as directed by Engr-in-Charge. | 2 | Each | - | - |
| 10 | M&L for earthing in replacement with galvanized mild steel earth plate electrode (60cm x 60cm) x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 mtrs below ground level connected to GI strip (32 x 6)mm as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) (1:3:6) type C-1 (using 20mm graded stone aggregate), with fair finish internal surface of concrete chamber and 15mm thick cement plaster in CM (1:4), funnel with wire gauge mesh, 80mm thick RCC pit cover 320mm x 320mm of RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) reinforced with XPM, Jalli and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed by Engr-in-Charge. | 2 | Each set | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
TENDER.pdf
Tender Documents • 1.19 MB
BOQ_836284.xls
BOQ • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .