Construction work of Guharaj Nishad Gate near Mastani Mahal in Development Block Jaitpur

Earth work in excavation in trenches for foundation and pipes,cables etc.in ordinary soil (loam clay or sand) including lift up to 1.50 m & lead up to 50 m & dressing of sides & disposal of surplus excavated earth as directed by the E/I within a leadof 50 m S.I.No.251

Concrete with 4cm. Gauge stone ballast F.Sand& cement 8:4:1 in base concrete of foundation as per S.I.No.281

R.C.C Work in raft foundation and footing with cement c.sand & 20 mm stone grit 1:1.5:3 incl. all labour & material. S.I No. 289

M.S . Iron work in plain work in R.C.C Work.Analysis of rate inclosed

Structural steel work in single section,fixed with or without connecting plate including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer etc all complete.DSR-10.25.1

Steel work inbuilt up Tubular(round,square or ractangular hollow tubes etc) Trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer including welding and bolted with with special shaped washers etc all complete.DSR-10.16.3

Providing and fixing of 25 mm dia & 600 mm long bolt with nuts and washer including minimum 80 mm threading on bolt etc all complete.

Add 2 coat of synthetic enamel paint.

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC 67 2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012 & Proof of the same Report shall be uploaded which quoting tende:. The rate shall include all materials, labour, T&P, transportation, installatic.. and incidentals all complete as per direction of the Engineer-in Charge.MORTH 801

Labour charges,T&P such as hydra and other tools etc.