Works contract for West Division

Amount

Excavation of Pole/Stay pits

Excavation of pole pit up to 27”(8.0m) pole by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Stay bit 4.5” to 5” depth by using JCB or manual

Hard Rock requires without blasting

Medium rock and debse medium rock reqires blasting

Erection of poles.

PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

PSC/ RCC poles/Metal poles above 8.00m by using JCB or maual

Metal supports above 9.00m/ RSJ/ Rail pole/ Fabricated poles/ Tubular pole by using JCB or maual

Erection of stay set complete

Fixing of line materials

HT V Cross arms / Channel Cross arms / Guarding Cross arm 3 1/2, 4 1/2 /Tapping Channel Cross arm

LT 3 Phase cross arm

LT single Phase cross arm

HT / LT TI Fitting

Fixing of Aluminium Knob

Fixing of HT Pin Insulators (11/22 KV)

Fixing of HT 11KV stain disc

Fixing of HT 22KV stain disc

Fixing of LT Pin Insulators

Fixing of LT Shackle

Paving and Stringing of conductor

ACSR 7/4.09mm Raccoon conductor

ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

ACSR 7/2.59 mm / AAAC 2.50 mm weasel and ACSR 7/2.11 mm conductor

Concreting of Poles

Mass concreting including Materials (Cement + River sand/ M.Sand and Blue metals and watering)

Sleeve concreting including cost of Materials and labour 375mm x 375mm x 50mm.

Stay concreting including cost of Materials and labour 375mm x 375mm x 50mm.

Earthing of Pole

Earthing of pole with coil earthing including burying looping and binding.

Replacement of earthing of pole with coil earthing including burying looping and binding

Transport of Poles/Materials/ Conductors and other materials

Transport of Poles/Materials/ Conductors and other materials (excluding loading and unloading charges) below 8 kms (Plains)

Transport of Poles/Materials/ Conductors and other materials (excluding loading and unloading charges) 8 Kms. For additional Km (Irrespective of weight in tonnage)

Transport of Poles road side to pole pit including loading and unloading

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Loading & Unloading of Poles. & Materials

Loading of poles upto 27"

Loading of Metal (all sizes)

Unloading of poles upto 27"

Unloading of Metal (all sizes)

Loading of materials

Un-Loading of materials

Erection of Transformer

Loading or unloading of Transformer upto 100 KVA

Loading or unloading of Transformer above 100 and upto 200KVA

Loading or unloading of Transformer above 200 KVA

Erection of New Transformer all capacities (with jumpering)

Replacement of failed Transformers all capacities

Loading/ unloading of HT Metering set

Erection of HT Metering set

Replacement of failed metering set

Services Connections.

Releasing of Single phase service wire and refixing.

Releasing of Three phase service wire and refixing.

Erection of street light including fixure fitting

Dismantling of Line Materials

Dismantling of transformer structure set

Dismantling of Single pole transformer structure set

Dismantling of DP Structure with AB switch, Top channel, Cross Bracing, Earthing, Painting, Providing stay and concreting.

Dismantling of pole (9.0m and above).

Dismantling of pole (7.5m and 8.0mtr).

Dismantling of HT pin Insulator

Dismantling of HT/LT TI Fitting

Dismantling of 11 KV Strain Disc

Dismantling of 22 KV Strain Disc

Dismantling of LT 3 Phase X arm

Dismantling of Tapping X arm, HT V Cross arms/ Channel Cross arms / Guarding cross arm

Dismantling of 1 PH X arm

Dismantling of Alu Knob

Dismantling of LT pin Insulator

Dismantling of LT Shackle Insulator

Dismantling of Stay set complete

Dismantling of ACSR 7/3.35mm

Dismantling of ACSR 7/2.59mm & 7/2.11mm ACSR conductor

Re-stringing of ACSR 7/3.35mm

Re-stringing of ACSR 7/2.59mm

Dismantling of street light including fixture fitting

Lathe works

Labour charges for alteration of Back Clamps / Stay Clamps to suit for the works

Drilling of hole in channel only 3/4" & 1"

Cutting of channel

Cutting of RSJ poles

T.I.Fitting welding with clamps

Miscellaneous Works.

Releasing of grills from RCC Poles

Releasing of HTS wire from PSC poles

Providing LT bus bar arrangement in DT structure loc.

Erection of New 10' Earth pipe replacing the corroded earth pipe and renewal of earthing including burying looping and binding.

Tree cutting works

Cutting of coconut leaves (per tree)

Clearing of branches of trees

General

Set right the leaning of poles (All size of poles)

Engaging of JCB/ Crane for first 2 Hrs

Engaging of JCB/ Crane For every additional Hrs

Structure Erection

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer)

(Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Erection of D.P. structure with AB switch, top channel, cross bracing, earthing, painting, providing stay including concreting

G.S.T. @18% should be Entered by the Bidder