Annual Contract for Foundation and Related Civil Works in Factory Area HAL, Nashik

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2024 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs

Turn over (Rs. In Lakhs)

Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year. Related Document to be Uploaded to eProcurement Portal.

Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs)

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience:

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GSTIN Registration Number.

ESIC Registration Number

EPF Registration Number

Earnest Money Deposit (EMD)

License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)

Documents to be uploaded along with tender

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence

Contact details

PAN No.

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of person holding the power of Attorney.

Related documents to be uploaded in eprocurement portal.

Bank(s) details: [Copy of the cheque leaf to be uploaded]

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal and hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc.

Undertaking Annexure-L

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 147) including price bid do hereby accept all the terms and conditions laid down

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete as directed by EIC

Dismantling floor or wall tiling including cement mortar bedding, removing & returning serviceable tiles to store and rubbish off the premises all as specified & as directed by EIC.

Demolishing carefully the existing brick masonry of any size, type and at any position, built in cement mortar , necessary scaffolding, temporary supports as required at site complete including disposal of debris to a distance of 50 metre outside shop area/work site for further disposal etc. complete as directed by EIC. Efforts shall be made to prevent dust by arranging proper covering. (Care shall be taken to prevent damages to the service lines/cables and on identification of any service lines/cables the shall be notified to Engineer In Charge for instructions on such matters. In case of accidental breakages the same shall be made good by the contractor at his cost.)

Demolishing carefully the existing Stone masonry of any size, type and at any position, built in cement mortar , necessary scaffolding, temporary supports as required at site complete including disposal of debris to a distance of 50 metre outside shop area/work site for further disposal etc. complete as directed by EIC. Efforts shall be made to prevent dust by arranging proper covering. (Care shall be taken to prevent damages to the service lines/cables and on identification of any service lines/cables the shall be notified to Engineer In Charge for instructions on such matters. In case of accidental breakages the same shall be made good by the contractor at his cost.)

Demolishing cement concrete of any description manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Dismantling structural steel at any height and position, including cutting grooves on the wall / floor and taking out carefully and depositing to Civil stores etc. complete as directed by EIC.

Demolishing carefully the existing reinforced cement concrete of any description and in any position including cutting the reinforcement wherever required, including trimming the sides and stacking at site for further disposal complete as directed by EIC.

Cutting holes upto 30 x 30 cm in floors, walls and roofs of any description for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc., including making good the same with proper finishing complete so as to make it leak proof etc. complete, as directed by EIC.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed by EIC, within a lead of 50m.

All kinds of soil

Ordinary rock

Hard rock (blasting prohibited)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, as directed by EIC.

All kinds of soil

Ordinary rock

Hard rock (blasting prohibited)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads(i.e. carriage of 5 km lead) including all lifts involved complete all as specified & as directed by EIC.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, etc. complete as directed by EIC- lead up to 50 m and lift up to 1.5 m.

Excavating , supplying , stacking and filling of local earth (HAL factory premises) moorum in trenches or embankment in layers (each layer should not exceed 20 cm) by mechanical transport up to 5 KM lead etc. all complete as per drawing/as specified and as directed by EIC/OIC.

Providing centering & formwork for plain or reinforced cement concrete straight, horizontal sloping as required including all cutting & waste centering bracing, strutting and removing the form after the retention period complete as specified & as directed by EIC/OIC for:

Foundation, footing, bases of column, raft and raft beams. Sides and soffits (if any) of foundation and plinth beams ; and similar work; vertical or to batter.

Formwork to faces of walls, retaining walls ,abutment, parapets and staircase railings and similar work including attached pillasters, buttresses etc., vertical or to batter.

Suspended floors, roofs, landings, balconies and access platform

Providing and Constructing brick masonry built in Cement mortar 1:6 straight or curved in plan at any height and level including necessary scaffolding , curing complete as directed by EIC. (Brick of class designation is minimum 35kgf/sqcm)

Providing and constructing half brick masonry built in Cement mortar 1:4 straight or curved on plan at any height and level for super structure including necessary scaffolding , curing complete as directed by EIC. ( Brick is of class designation 35kgf/cm2. M.S reinforcement, if required shall be paid seperately).

Providing and laying in position Mild steel High strength Thermo-mechanically Treated deformed (TMT) bars/Plain bars of grade Fe-500D or more of any dia, cutting to required length, bent to shape, hooking, cranking, bending spirally for hooping for columns, hooking ends and binding with and including annealed Mild steel wire not less than 0.90 mm dia or securing with clips including necessary lapping, spacers/cover blocks complete as specified and as directed by EIC.

Providing & Laying PCC/RCC 1:2:4 using 20 mm aggregate as per requirement and as instructed by Engineer In Charge for foundations, flooring, base concrete, leveling course, etc. of any thickness including mixing , conveying and laying in any position to required level , consolidating by mechanical vibrators etc. as required at site as directed by EIC.

All work upto plinth level

All work above plinth level

Providing & Laying PCC/RCC 1:1.5:3 using 20 mm graded stone aggregate at any Position and level including mixing , placing, consolidating using mechanical vibrators etc. complete as specified and as directed by EIC. (Reinforcement & form work will be paid separately. The work also includes making pocket holes as required as per drawing)

All work upto plinth level

All work above plinth level

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) etc. comple as directed by EIC.

Providing & Rendering 15mm thick plain cement plaster in cement morter 1:6 using screened clean sand on fair faces brick work or concrete surface including providing neeru finish to a thickness about 1.5 mm, finishing to smooth and even surface with straight edges , including scaffolding working at any level at any height , mixing of mortar , preparation of surface , rendering in isolated / narrow widths or in hands, curing, cleaning the area etc. complete all as specified and as directed by EIC.

Providing and rendering 18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge on fair faces of brick/stone masonry work or concrete surface including curing and finishing with straight edges, with necessary scaffolding for working at any height/level including finishing in small patches/isolated widths/bands etc complete as specified and as directed by EIC.

Providing and rendering plain cement plaster 15mm in cement mortar 1:4 and providing neat cement finish including necessary preparation, cleaning, scaffolding, curing including isolated width all as specified and as directed by EIC.

Providing, fabricating, hoisting & errecting in position structural steel work made out of beams,channel, angle, tee, flats,plates etc. welded or bolted type for work of roof trusses, purlins, bracing as per existing design necessary connection such as cleats, base plates, nut bolts, holding down bolts, welding, drilling, threading & including cutting ,welding, drilling, notching, etc & over a zinc chromate primer complete as specified as directed by EIC.(Structrual steel will not be supplied by H.A.L.Weight of nuts bolts & welds will not be considered for payment.The weight of the foundation bolts of required dia and length will be paid under same item.)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, laying to rise or falls etc. complete all as directed by EIC.

300mm dia

450 mm dia

600 mm dia

Providing, laying, spreading and compacting stone aggregate(approved Granite/trap or basalt) of 63 mm to 45 mm size along with Stone screening of 11.2 mm nominal size(Type B) to make water bound macadam (WBM) of 75mm compacted thickness, including hand picking, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering, ramming and compacting to the required density etc. complete as specified & directed by EIC.

Providing and filling in position rubberized bitumen hot sealing compound of grade 'A', conforming to IS: 1834 of approved make, for sealing of expansion/construction joints of any size in roads / pavements all complete as per direction of the Engineer-in-Charge, including cleaning all existing joint with the help of wire brush , removing all loose dust and partical, required tools and plant for heating and filling etc. as specified as directed by EIC.

Providing & fixing Vitrified ceramic tiles specified thickness by the manufacturer (square/rectangular) polished , any shade, area of each tile not exceeding 1 sq.m. , in floors including providing and laying 20mm thick screeding in cement morter 1:4 set and jointed in neat cement slurry 3.3kg per Sqm and pointed in white or coloured pigment to match , including curing cleaning complete as specified and as directed by EIC. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing & fixing machine pressed precast concrete interlocking paver block any shape and size confirming of 60 mm thickness, M-35 Grade, approved make and quality on bed of uniformly graded 6 mm stone grit & below having average thickness of 20 mm with proper compaction, required level, grade & camber etc. including loading, unloading & stacking etc. complete as directed by EIC etc

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. complete, as directed by EIC -W.C. pan with ISI marked white solid plastic seat and lid.

Supplying of Tile fixing Chemical adhesive for application over tiles complete all as specified and as directed by EIC

Rupees Seventy Six Lakh Fifty Eight Thousand Seven Hundred Thirty Two and Fifty Four Paise Only

Approximate Basic Amount Put to Tender

Rupees Thirteen Lakh Seventy Eight Thousand Five Hundred Seventy One and Eighty Five Paise Only

Rupees Ninety Lakh Thirty Seven Thousand Three Hundred Four and Forty Paise Only