Construction Of Community Toilet at Cauvery Nadukarai in Thirukkattupalli Town Panchayat

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations SS 20B

Supply delivery and filling of River Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

RCC 1:1½:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering , Centering and cost of Reinforcement grills but including curing ,finishing etc complete with standard specification and as directed by departmental officers etc complete as per standard specification.

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.-

Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specificationand as directed by department officials.

Upto Basement

Above Basement

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

With out strutting

With strutting

Plastering walls with cement mortar 1:5(One cement five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc complete as per standard specification.

Special Plastering with cement mortar 1:3 (One cement three sand) 10mm thick including cost and conveyance of materials to site and including all labour charges etc complete and as directed by department officiers etc complete as per standard specification.

Dadooing sides of walls with Glazed design tiles of size 200 x 200 x 6 mm set in Cement mortar 1:3 _ 20 mm thick and pointed with the same colour cement including cost and conveyence of all materials , labour charges etc complete as per standard specification.

Paving the flooring withCeramic tiles of size 300mm x 300mm x 6mm of approved colour and quality laid in cement mortar 1:3 (one cement and three sand ) 20mm thick in all floors and the top pointed with the colour cement etc., complete.

Supplying and fixing MS grill to doors windows and ventilators etc. using 20mm x 6mm as directed by the departmental officers inclusive of cost of MS grill and labour charges including one coat of red oxide and fixing in position etc. complete (as per schedule of rates) as per standard specification

Supply and fixing of PVC door of ISI make approved quality and colour including cost and conveyance of all materials and all labour charges etc., complete as per standared specification.

Supplying and fixing in position white glazed Indian water closet of size 580 X 440mm of Orissa type of approved quality with 'P' or 'S' trap with sand cushion and forming flooring alround the closet using 40mm broken brick jelly lime concrete 1:2:5 ; 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers etc complete as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.

Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification.

Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by TWAD Board Officers etc.,

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 42

Wiring with 2 x 2.5 sq.mm PVC unsheathed Sc.alu. cable of 650V grade in suitable TW Fillets on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour light point and Fan point. SD 20

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb, wire and making good of the concealed portion with suitable colour SD 83

Supply and fixing of 32 Amps DPIC Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only SD 144

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD 125

Drilling of borewells of size 4" to 5" dia. in Sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including conveyance of hand Boreset including loading and unloadinetc. complete. complying with std. specifications.

Reaming from 6" Pilot bore to 12" size bore as directed by the TWAD Board Officer inculiding all labour charges etc. complete. complying with std. specifications.

Supply and delivery of 110 mm Dia Casing Pipe including cost and conveyance of all Pipes and all labour charges and other incidental charges to site etc., complete as per standard specification.

110 mm Pvc Plain pipe

110 mm Pvc Slotted pipe

110 MM Pvc End Cup

Labour charges for inserting casing pipes assembly (Withslot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply and Laying 1.50 sqmm S.Motor LT Cable inculiding all labour charges etc. complete. complying with std. specifications.

Supply and Laying 32 mm Dia UPVC Coiumn Pipe inculiding all labour charges etc. complete. complying with std. specifications.

Supply and Laying PVC Pipe inculiding all labour charges etc. complete. complying with std. specifications.

20mm Dia PVC Pipe

25mm Dia PVC Pipe

20 mm c.p Tap

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supplying and fixing of 30W LED Street Light Fitting with LED LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. with standard specifications.

Finishing the top of Roof with one course of machine pressed tiles of size ( 23x23x2 cm ) approved quality in C.M. 1:3 - 12 mm thick mixed with water proofing compoud confirming to IS @ 2 % by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc,. complete complying with Standard Sp

Plain Cement Concrete 1:2:4 (one cement, two M Sand, Four aggregate) using 20mm gauge hand broken granite stone jelly including laying to the required thickness and finising the top smooth etc., complete

Providing, Laying, Spreading and Compacting grading aggregates to WET MIX MECADAM Specification in 250mm thick in two layers each layer in 125mm thick including premixing the materials with water at OMC in mechanical mix plant. Cariage of mixed materials by tipper to work site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratory roller to acheive the desired density etc complete 111,112,406 &900 MORTH Specification

Providing and laying of Rubberized Paver block 63 mm thick High Strength type of interlocking pavement block in required size of minimum comperesive strength of 40 N/mm2 in Uniform Shape at approved make to be laid in curring bone pattern with approved non sticking surface in top and the rate including leveling the base preparation of subbase with the Stone Dust cushion 100 mm thick laying out the cut pieces to fit the edge vibrating the paver sweeping transporting loading , un loading and laying the Paver block etc Completed. as per Standard Specification.

P.RAJKUMAR