REPAIR TO CERTAIN ROADS AND HARD STANDING FOR OTM ACCN IN THE AREA OF AGE B/R CENTRAL UNDER GE DEOLALI.

Amount

Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen, VG-10 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m of paving bitumen, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exceeding 30mm all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and n exc 100 mm deep complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013

M&L for preparing on WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 7.50 Kg per 10 Sqm complete all as specified and directed.

M&L for preparing on existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @2.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed.

Demolition of cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for

M&L pavement quality cement concrete (PQC) work in pavement /hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,as per design mix laying in alternate bays over and including 400 micron HDPE sheet virgin quality, water proof, wrinkle free without puncture weighing 390gm/sqm (min) over 10mm average sand cushioning with require formwork complete all as specifide and directed.

Finishing surface of concrete roads, pavements,by brooming while concrete is green.

Forming Contraction (Dummy) joints 35mm deep x 10mm wide, filled with sealing compound Grade 'A'

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A'

M&L for painting line, dashes, arrow, letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge.

Taking out carefully existing Solar Cat Eyes of size 125x125x25mm from road surface and refing the same in new position as per manufacturers instructions complete all as specified and directed by Engineer- in- charge.

Taking out carefully existing Cat Eyes of size 100x100x20mm from road surface and refing the same in new position as per manufacturers instructions complete all as specified and directed by Engineer- in- charge.

Supply and fixing speed bump/breaker made pf ABS material yellow and black colour with two reflectors moulded of size 365x250x50mm complete all as specified and directed. Make: 3M or equivalent as approved by GE

Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite or equivalent as approved by GE

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA strplens relector of model No DA 972.0 fixed with and incl MS stud of of suitable size as per manufacturers instructions. Make 3M/Green lite or equivalent as approved by GE

M/S K.K.BINNAR (BID ID -3078414)

SANJAY B SHARMA (BID ID -3069286)

M/s M R MAHANA (BID ID -3073605)

Ranmale Developers (BID ID -3078327)

Anand Construwell Pvt.Ltd. (BID ID -3068927)