Upgradation of water Testing Laboratory Kaza as NABL standards (Micro-biological standard) under JSV Division Kaza in Spiti valley Distt Lahaul Spiti

Amount

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. up to 200 mm in thickness.

Edges of slab and breaks in floors and walls under 20 cm wide.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor Steel

Ist class brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) ointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts. (13680000)

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts (16103000).

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts (16105000).

Providing and fixing anodized Alluminum work for door windows, ventilator and partitions with extruded built transperent or dyed to required shade according to IS :1868 ( minimum anodized coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expensaion hold fastner including neccesary filling up of gaps at junction, Top, Bottom and side with required PVC/Neoprene felt etc. Allumium section shall be smooth, rust free, straight, mitred and jointed mechanicaly wherever required including cleat angle alluminium snap beeding for glazing/ panneling CP brass./ stainless steel screws. All complete as per architectual drawings and the direction of Engineer-In-Charge.

Providing and fixing glazing in alluminium doors windows, ventilators shutters and partitions etc. with PVC/Neoprene gasket etc. complete as per the architectual drawings and the direction of Engineer-In-Charge. Glazzing with glass panes of 5mm thickness( weight not less than 10 Kg/Sqm.

Providing and Fixing door lock of Superior quality complete in all respect.

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) Cera make i/c entire carriage of material within all leads and lifts.

Providing and fixing 32mm dia lead waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.

Providing ,fixing and Jointing of PPR pipe of 25 mm diameter complete in all respect.

Providing and fixing of 25x15 mm reducing socket complete in all respect.

Providing and fixing of 25 mm diameter elbow complete in all respect.

Providing and fixing of 25 mm diameter union complete in all respect.

Providing and fixing of 25 mm diameter Tee complete in all respect.

Providing and installing Five Layer Water Tank of reputed make like Syntax/Vectus etc. complete in all respect.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts. (1504010000)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 50 x 20 mm.

Providing and fixing 12mm thick prelaminated particle board flat presed three layer graded wood particle board conforming to IS 12823 Grade I and Type II , in Panneling /Ceiling and partions frames with CP brass /Stainless steel screws etc. complete as per direcion of Engineer-in-charge.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x16 Sq.mm.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Bell push, Modular.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing of Double door-24 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required.

Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:-

Supplying and fixing 150x150mm square 12 watt LED lights A.C. single phase,230 volts complete as required

Supplying and fixing 28 watt LED street lights A.C. single phase,230 volts complete as required

SONAM PALDEN (BID ID -555699)

TANZIN NAMGIYAL (BID ID -555683)