8901/GWL/E8 PROVN OF DG SET AGAINST BER DG SETS UNDER GE GWALIOR, PROVN OF 01 X HIGH MAST LIGHT AT NCC OTA, GWALIOR AND PROVN OF THREE PHASE ELECTRIC CONNECTION TO CT SCAN AT MH GWALIOR

Amount

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, outdoor type with acoustic enclosure as per IS – 7888 engine as per IS 10001/10002 and Alternator as per IS: 4722 complete with electronic governer relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 62.5 KVA Along with remote monitor system having following facility without any cost online detail of DG parameter on mobile/Laptop Desktop 1. Phase Voltage 2. Current 3. Frequency 4. Genset KVA, KW, KWH, KVAR, 5. Power Factor 6. Canopy Temp. 7. Lube oil pressure 8. Engine temperature 9. RPM 10. Run Hours 11. Number of starts 12. Fuel level 13. Auto. Manual stop 14. Battery charging condition AMF feature.

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, outdoor type with acoustic enclosure as per IS – 7888 engine as per IS 10001/10002 and Alternator as per IS: 4722 complete with electronic governer relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 20 KVA Along with remote monitor system having following facility without any cost online detail of DG parameter on mobile/Laptop Desktop 1. Phase Voltage 2. Current 3. Frequency 4. Genset KVA, KW, KWH, KVAR, 5. Power Factor 6. Canopy Temp. 7. Lube oil pressure 8. Engine temperature 9. RPM 10. Run Hours 11. Number of starts 12. Fuel level 13. Auto. Manual stop 14. Battery charging condition AMF feature.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated using 25 x 4 mm galvanized MS strip

Supply and installation of Chemical earthing electrode 3.0 mtr length, galvanised outer dia 88mm and inner dia 48mm and the cavity between the rod pipes filled with ground resistance improment powder, sealed with both endthe outer pipe of electrode should be Zink coated, the electrode should buried directly in ground by making boring of diameter 10" with boaring machine highly connected with GI strip 25x3mm of 2 to 3 mtr length to facilitet further connection to earth dolly and provision of earthing chamber in bricks wall size 45x45x15 cm and having PCC cover of required size complete all as directed and all as per IS 3034(1981)

S&F 100 Amp,415 V wall mounted Busbar chamber IHBC010008 Completed.

S&F 63 Amp,415 V wall mounted Busbar chamber IHBC010008 Completed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 70 Sqmm 3.5 Core.

M&L Cable joining kit for LT cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 sqmm.

M&L Cable joining kit for LT cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 150 sqmm.

Supply, errect test commisioning High mast light structure system, 20 m height 20 sides polygon shape structure with base dimension 360 mm & top dimension 150 mm, using hot dip galvanised steel plate including all accessories like head frame, steel wire rope 6 mm dia (97/19 gauge), trailing cable, double drum winch, Galvanised lantern carriage arrangement suitable for 9 Nos luminaires symmetrically with its control gear boxes, electrical wire complete, lightining finial integral power tool system installed inside the base compartmentent for its opretation, GI pipe 40 mm bore 2,5 mtr long 2 Nos for earthing etc complete all as per specified & directed. Note:- (a) Construction of foundation for high mast light and foundation bolts will be measured and paid separatly. (b) Supply and fix floodlight luminaire and its control gear box will be measured and paid separatly

Material and labour for construction of RCC foundation M 20 grade concrete using 20 mm graded stone aggregate for high mast light (structure size 1.5M x 1.5M x 3.5M depth).

Supply and Grouting foundation bolts of special steel along with nuts washers, anchor plates and templates etc complete all as per specified and directed.

Earthing of machinery/equipment installed at power house/substation using 32 x 6 mm galvanized MS strip and MS galvanized Earth plate of size 600 x 600 x 6 mm as earth electrode

S& F Flood light fitting, complete with switch gear control gear unit lamp and fixing for 240 Watt LED light

M&L for provision of the control panel suitable for high mast light alongwith MCB TPN 32 A-01 No,single dial timer for automatic operation,out going terminals and control circuit for power tool motor complete all as directed.

S&F Twin dom aviation obstruction light type BJAOL 2 with gls Lamps

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 3.5 Core.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Supplying and laying un-reinforced precast concrete cable cover, class LT, type 1 with peak, size 250mm x 150mm x 40mm.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique of size 80 mm dia.

S&F HDPE pipe PE 80 PN of 80 mm dia confirming IS 14930 part -I & II for protection of LT Cable complete all as specified and as directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 240 Sqmm 3.5 Core.

Excavation in tenches not exceeding 1.5m wide and not exc 1.5m depth and getting out in hard/dense soil complete all as specified and as directed.

10 mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over DLC layer as specified and directed. (No additionaI amount to be paid for overlap)

M&L Cable joining kit for LT cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 400 sqmm

Supply, installing, testing and commissioning of outdoor LT panel board 415 Volts, 4 wire, 3 phase factory fabricated powder coated, cubical, weather and vermin proof outdoor kiosk type, front opening,mounted on 2 pole structure made out of 3.15 mm thick CRCA sheet of size suitable for mounting the its accessories with electrolyte connection of the equipment/accesories to be fixed, cable glands, lugs, mounted on steel angles supports of suitable size having with push lock arrangment all as specified and directed. (a) Electrolytic aluminium bus bar 800 Amps in distant colour with epoxy supported insulators - 01 Job (04 Nos). (b)MCCB of 400 Amps,rupturing capacity 36 KA - 01 Nos for incoming, MCCB 4 pole, 250 Amps, 415 Volts, rupturing capacity 36 KA - 01 Nos for (Outgoing).

Supply, laying, jointing and testing, XLPE insulated, Unarmoured,heavy duty, electric LT cable Aluminium conductor, 1100 Volts grade, of size 1 core 120 Sqmm

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 100 mm dia for cable protection complete all as specified and directed.

M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and as directed.

M/s. Varinder Kumar Sharma

M/s Tirupati construction

Om Electricals

M/s Sagar Construction