Upgradation of defective conventional lights of all types with LED lights including ground, first, second floor of breeding unit at old campus and electrical works for setting up of clean room facility at new campus of CDRI

Amount

Submain wiring

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ heavy gauge PVC conduit as required.

1)2x1.5 Sq.mm

2)3x1.5 Sq.mm

3)2x2.5 Sq.mm

4)3x2.5 Sq.mm

5)2x4 Sq.mm

6)3x4Sq.mm

7)2x6 Sq.mm

8)3x6 Sq.mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required:

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1)1 way 5/6 amps

2)1 way 15/16 amps

3)5 Pins Socket 5/6 amps

4)6 Pins 15/16 amps socket

5)Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box including modular plate etc as required.

Supplying and fixing following size/modules.GI box along with modular base and cover plate for modular switches in recess etc as required.

a) 1 or 2 Module (75mmX75mm)

b) 3 Module (100mmX75mm)

c) 4 Module (125mmX75mm)

d) 6 Module (200mmX75mm)

e) 8 Module (125mmX125mm)

f) 12 Module (200mmX150mm)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell suitable for single phase, 230Volt, 50Hz on the existing box excluding connections etc as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Extra for fixing the louvers/shutters completes with frame for exhaust fan of all sizes.

Supply and fixing 5 amps to 32 amps. rating 240/415 volts, ‘C’ curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required.

i) Single pole

ii)Single pole and neutral

iii) Triple pole

iv)Triple pole and neutral

Supply and fixing single pole blanking plate in the existing MCB D.B. complete etc. as required.

Supply and fixing following rating, double pole, 240 V isolator in the existing MCB D.B. complete with connections, testing and commissioning etc as required.

i) 40 amps.

ii) 63 amps.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

i) 40 amps.

ii) 63 amps.

Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 12way, Double door

b) 16 way, Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

a) 4 way (4 + 12), Double door

b) 8 way (4 + 24), Double door

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

a)100 A, 16 KA,TPMCCB

b)125 A, 16 KA,TPMCCB

c)150 A, 16 KA,TPMCCB

d)200 A, 16 KA,TPMCCB

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required:

a)Upto 35 sq.mm

b)Above 35 sq.mm and up to 95 sq.mm

c)Above 95 sq.mm and up to 185 sq.mm

d)Above 185 sq.mm and up to 400 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 K V grade of following sizes on wall surface as required:

a) Upto 35 sq.mm (clamped with 1mm thick saddle)

b) Above 35 sq.mm and up to 95 sq.mm (clamped with 25x3mm MS flat clamp)

c) Above 95 sq.mm and up to 185 sq.mm (clamped with 25/40x3mm MS flat clamp)

d) Above 185 sq.mm and up to 400 sq.mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland & heavy duty lugs for the following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grades as required:

a)3½ X 25 sq. mm (28mm)

b) 3½ X 35 sq. mm (32mm)

c) 3½ X 50 sq. mm (35 mm)

d) 3½ X 70 sq. mm (38mm)

e) 3½ X 95 sq. mm (45 mm)

f) 3½ X 120 sq. mm (45 mm)

g) 3½ X 150 sq. mm (50 mm)

h) 3½ X 185 sq. mm (57mm)

i) 3½ X 240 sq. mm (62mm)

j) 3½ X 300 sq. mm (70 mm)

k) 4 X 10 sq. mm (25 mm)

l) 4 X 16 sq. mm (28mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

a) 3½ X 70 sq. mm

b) 3½ X 95 sq. mm

c) 3½ X 120 or 150 sq. mm

f) 3½ X 300 sq. mm

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50 meter.

Excavation of the cable trenches in hard rock not exceeding 1.5 meter in width, and lift upto 1.5 meter, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meter.

Providing 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Supply of 1.1KV grade, PVC insulated and PVC sheathed heavy duty aluminium conductor cables of following sizes etc as required:

a)4 x 10mm square

b)4x 16mm square

c) 3&1/2 x 25mm square

d)3&1/2 x 35mm square

e)3&1/2 x 50mm square

f)3&1/2 x 70mm square

g) 3&1/2 x 95mm square

h) 3&1/2 x 120mm square

i) 3&1/2 x 150mm square

j) 3&1/2 x 185mm square

k) 3&1/2 x 240mm square

l) 3&1/2 x 300mm square

Dismantling of defective existing office light fixture or fan or point wiring and handing over the material to electrical section as required.

Dismantling of sub main wiring from the surface or reccessed , restoring the surface & handing over the materials to the electrical section, etc as required.

Dismantling of existing or defective old metal clad power switches, MCB enclosures, DB’s, after disconnection of cables / wires, restoring of walls and handing over the material to electrical section, etc as required.

Dismantling of various sizes of cable from the surfaces, restoring the surfaces & handing over the materials to electrical section, etc as required.

Supply & mounting of 3 or 4 pole, 63 Amps, 16KA, 415V MCCB on existing mild steel box or enclosure, etc as required.

Supply & fixing of sheet steel enclosure box for fixing of 63 or 100 or 125 or 160 or 200Amps 3 or 4 pole MCCBs etc as required.

Providing and fixing of 3mm phenolic laminated sheet/perspex sheet on existing metal board/box etc as required.

Supply & laying of 6 SWG GI earth wire along with existing aluminium power cable including end termination with proper size of lugs etc as required.

Supply & fixing of 40 or 45 Watt, Post top lantern LED luminiary complete set along with accessories, including disconnection/removal of defective fitting & reconnection after mounting of new fitting, etc as required.

Supply & fixing of 90 Watt, street light LED luminiary complete set along with accessories, including disconnection/removal of defective fitting & reconnection after mounting of new fitting, etc as required.

Supply & installation of following type of energy efficient LED light fitting along with accessories and manpower, including dismantling of defective light fitting, etc as required:

a)18 or 20 Watt, 4feet stand alone industrial type

b)9 or 10 Watt, 2feet stand alone industrial type

c)36 Watt, 2FeetX2Feet Slim light

d)12 to 18Watt, Slim down lighter (155 to 210mm dia)

Supply & fixing of following sizes of single phase, 230 volt, 50Hz metallic ceiling fan, etc as required:

a)1200 mm sweep

b)1400 mm sweep

Supply & fixing of following sizes of single phase, 230 volt, 50Hz metallic exhaust or fresh air fan, etc as required:

a)225 mm sweep

b)300 mm sweep

Supply & fixing of following type of UVC tube light, including disconnection/removal of defective tube light & re-installation in the existing fitting, etc as required:

a) 1.5 Feet, 15 Watt, T8 double ended

b) 2 Feet, 18 Watt, T8 double ended

c) 3 Feet, 30 Watt, T8 double ended

Supply and fixing of modular CAT6 I O (Internet) box complete set including terminal and cover plate on the existing surface/wall including connections etc. as required.

Supply & fixing of 1.5 ton capacity, 5 star rated split air conditioning unit complete set along with all the requisite accessories, copper piping, manpower for sucessful commissioning of the suppield unit, etc as required.

Supply and drawing following sizes of speaker wires (oxygen free) for audio visual facility in the existing surface/ recessed steel/ heavy gauge PVC conduit/ casing capping etc as required:

1)23/36, 40/36 & 70/36in size

2)23/38, 40/38 & 70/38 in size

3)0.5, 0.75 & 1.5 Sq.mm in size

4)1.5, 2, 2.5 Sq.mm in size

GST 12 % (already included in the items rate, please do not fill GST here)

ROHILKHAND ELECTRICALS AND FABRICATORS