Dr.DharmabalEle_2025

Amount

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.) etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 3 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A FT switch (two way) and making good of the concealed portion with suitable colour for concealed staircase light point.Setc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4'20 W LED Single box type fitting complete with TW round blocks on wall with PVC unsheathed Copper leads from the terminals to the fittings with 20 W LED tubes with inbuilt electronic driver complete. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4'20W twin mirror optic suspension type fitting complete with louvers cover complete with conduit pipe suspension with PVC unsheathed FRLS copper leads from the terminals to the fittings with 2 Nos LED tubes with inbuilt electronic driver complete (Higher End) , complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4' 20W LED Twin Box Type fitting complete (Philips / Havells) complete with conduit pipe suspension from ceiling with PVC unsheathed FRLS Copper leads from the terminals to the fittings with 2nos. 20 W LED tubes with inbuilt electronic driver complete. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1200 mm (48") AC ceiling fan complete with 300W stepped electronic regulator with 500 mm down rod on the existing clamp .etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of holes in the wall etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC Exhaust fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 48W LED street light fitting IP65 complete with suitable dia GI pipe (class 'B') complete on the existing post / wall with PVC unsheathed Cu. Leads with MS clamps and aluminium painting with LED lamp. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall and concealed with 3mm thick hylem sheet etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 16A DP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 25 Amps flush type wall Socket with 25A DP MCB in flush with wall with earth connection (For AC Plug) [Higher end make].etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 40A DP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers. for UPS

Supply and fixing of 32A FP MCB 10 KA in suitable sheet steel enclosure in flush with wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. etc., complete complying with standard specification and as directed by the departmental officers. for UPS

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with IP 42 protection metal door type with 1No 32 Amps DP MCB 10KA as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Higher end) etc., complete complying with standard specification and as directed by the departmental officers

Supply and fixing of 4 way TPN 7 segment MCB DB with metal / acrylic double door cover with IP 42 protection (like Lgrand MDS /Hager make with 1 No 63A FP MCB and 1No 63A FP ELCB 30mA as incoming 3no,s 63A DP MCB isolators for sub incomers and 12No,s 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. the MCBDB and MCB should be with the ISI mark (Higher end) etc., complete complying with standard specification and as directed by the departmental officers

Supply and fixing of Three Phase 6 way Vertical type MCB DB with IP 42 protection Double door type DB (legrand) with 1No 63A 4P MCB as incoming and 3 Nos 32A TP MCB and 9 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCB DB and MCB's should be Higher end) etc., complete complying with standard specification and as directed by the departmental officers

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End.etc., complete complying with standard specification and as directed by the departmental officers for Pump room.

Supply and fixing of 8 way Vertical type Triple pole neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1No.160A 4 pole MCCB switch as incoming and 4 Nos 63 A TP MCB and 4 Nos 32 A TP MCB as outgoing on suitable angle iron frame work with MS cable entry boxes with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers. (for 32A TP MCB & 63A FP MCB power Distribution)

Supply and run of 2 of 1.5sqmm (22/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 2.5sqmm (36/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 4 sqmm (56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 4 sq.mm. copper wire making good of the concealed portion with suitable colouretc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe in flush with wall and ceiling with continuous earth wire connection of 6 sq.mm. copper wire making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sqmm. copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 10 sq.mm. (140 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sqmm. copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 400 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only. etc., complete complying with standard specification and as directed by the departmental officers. for Existing meter room.

GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height . For cable crossing corridor etc., complete complying with standard specification and as directed by the departmental officers.

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with rotary compressor operating on refrigerant R-32/non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with star rating of 3 star as per BEE specification and capable of performing the functions of Cooling Dehumidifying Air Circulating Filtering The installation works for the above split type AC units includes the following. 1.Mounting / Fitting Indoor and outdoor units at their respective locations.

2. Laying refrigerant pipeline of required length connecting not exceeding 3 metre distance and both units after drilling hole/holes in the wall if required. 3.Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4. Laying 15mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit. 5.Leakage testing the entire system unit. 6.Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 2.5 Sq mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit etc., complete complying with standard specification and as directed by the departmental officers. (Make: Carrier/Voltas/equivalent)

Supply of 5 KVA Electronic Automatic Voltage Stabilizer (Higher end) with Input Voltage range of 170 Volt – 270 Volt and Output Voltage range 200Volts to 240 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of water drain pipe line (1" PVC pipe) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of MS stand for fixing Outdoor unit. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 5/8" and 3/8" copper refrigerant pipe of 0.8mm thick with 2.5 sqmm 3 core chord between indoor and outdoor unit. (Extra beyond 3 mts supplied with AC unit) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 200A capacity dust and vermin proof cubic panel board of suitable size (4ft x 3ft x 1.5 ft) CRCA sheet for outer body and stiffness and doors, switches supports respectively and with supply and fixing of the following interior mounting switches with centre busbar chamber and vertical covers on both side of the busbar chamber at the extreme ends side and confirming to I.S Specification. All the main switches should be L&T / Siemens make only . (1) 200A TPN switch disconnector fuse units interior only with HRC fuses double break - 1 no. (Higher end make) (2) 63A TPN switch disconnector fuse units interior only with HRC fuses double break - 7 nos. (Higher end make)

The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection etc., complete complying with standard specification and as directed by the departmental officers. ( panel)

Supply, Erection, Testing and Commissioning of 400A capacity Dust and Vermin Proof Cubical Panel Board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting MCCBs arranged in two Horizontal or Vertical rows with one switch over the other with a central bus bar chamber and two nos. of Horizontal or vertical cable chambers at the two ends one on each side next to the switch chamber and confirming to IE rules. INCOMER: 1. 400A FP Switch Disconnector Fuse Units Interior only with HRC fuses double break (High End) = 1 no OUTGOING: 2. 250A TP Switch Disconnector Fuse Units Interior only with HRC fuses double break (High End) = 3 Nos 3. 125A TP Switch Disconnector Fuse Units Interior only with HRC fuses double break (High End) = 2 Nos 4. 63A TP Switch Disconnector Fuse Units Interior only with HRC fuses double break (High End) = 4 Nos

The panel should be painted with one coat of Red oxide as primer coat and two coats of enamel paint of approved colour, Approved by the site engineer and also the danger board. The capacity of fuse switches, size of the incoming and outgoing cables, the place to which the supply is fed shall be marked on switch chamber. The panel board should be mounted on suitable MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at the height of 0.75m from the ground level etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 3 1/2 x 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3 1/2 x 25 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3 1/2 x 25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 3 1/2 x 95 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. etc., complete complying with standard specification and as directed by the departmental officers.( for 8 way MCCB DBS )

Supply and fixing of brass cable gland for 3 1/2 x 95 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3 1/2 x 95 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection completeetc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying 2 Runs of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodetc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping 2 Runs of 31/2 x 150 sq.mm PVC LTUG armoured LTUG armoured cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUGaluminiumarmoured cablewith necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and erection of weather proof pedestal type pillar box of suitable angle iron frame work of size 2 x2 1/2x5 feet using MS sheet with Copper bus bar arrangement inside and housing 400 A TPN switch disconnector,with fuse carriers. The whole arrangements fixed in the single MS-Template on backside of the pedestal, the pillar box make up of 16SWG MS sheet steel with front double door (hinged type)pad locking arrangements complete set with neat finishing and both side slanting roof top arrangements of size 5' height x 2 1/2'’width x1 1/2 with 2 coats of red oxide and 2 coat of aluminium paint finish with 2 Nos earthling provisions and the pillar box erected of the ground clearance of 0.75Mtr height with suitable angle iron work and masonry pedestal etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 4 x 16 sq.mm PVC armoured LTUG cable with earth connection (etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch etc., complete complying with standard specification and as directed by the departmental officers.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 1 of NO: 8 SWG cu wire for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of WT bulk head fitting with guard suitable with 7W/9W LED bulb etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of single box type 4'20W fitting complete with electronic driver (Higher end) with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with LED tube etc., complete complying with standard specification and as directed by the departmental officers.

Sub Total

C.V.T ENTERPRISES (BID ID -1286030)