SPECIAL REPAIRS TO BUILDING NO ET 6 AT THE MARATHA LIRC UNDER GE BELGAUM.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description taken as credit complete. all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area exc 1.5 Sqm and n exc 4 Sqm.each and taken as credit complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Material and labour for Second class hard-wood in scantling clean sawn and fixed including dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor 50 mm thick etc surface finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc, and remopval of debris off the premises complete all as specified and as directed.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows and other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and as directed. (Note: Stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply and fix in repairs 150mm size extruded aluminum alloy handle, cast type, anodized complete all as specified and as directed. Note:Make :Classic/Crown/Adarsh

Supply and fix in repairs Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and as directed .Note:Make :Classic/Crown/Adarsh

Supply and fix in repairs 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.Note:Make :Classic/Crown/Adarsh

"Supply and fix Aluminium sliding window (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including two number provision of 4mm sheet frosted glass for panels, one number powder coated wire mesh for panel including provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish "

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick screed bed in cement mortar 1:6 including rubbing and polishing etccomplete all as specified and as directed.

Material and labour for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 etc complete all as specified and as directed.

Material and labour for Machine cut Granite stone slab , 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:6 including rubbing and polishing and dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified & directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board including dismantling old ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Supply and fix PVC (SWR) eaves gutter trapezoidal profile 150mm bore including pipe accessories PVC holder bats , bolts nuts et and including dismantling of exsiting rain gutter of any description and taken as credit complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Supply and fix Rolled Mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Conforming to grade Fe 410 W Gde E-250 quality A etc complete all as specified and as directed.

Supply and fix Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and as directed.

Supply and fix Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix Aluminium composit panel board 4mm thick for cladding/bush board with aluminium frame work of size 35mmx25mmx 2mm thick aluminium section with necesary fitting and scaffolding etc, complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc and removal of debris off the premises complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately."

Supply only integral water proofing compound Note :Make :Impermo/Roff/Cico

Material and labour for Rendering 10mm thick in CM 1:6 on brick surfaces and finished even and smooth witout using extra cement etc, including taking down cement plaster on brick or stone wall or ceiling concrete etc. and racking out joints hacking for key scrubbing down with water etc and removal of debris off the premises complete all as specified and as directed.

Material and labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, complete all as specified and as directed

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint on wall complete all as specified and as directed

Material and labour for Complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint on wall including necessary preparation of old wall surface complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

"Material and labour for Preparation of old wood and wood base surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint . complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make :Finolex/Supreme/Prince(ISI MARKED)

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete and making good to disturbed area complete all as specified and as directed.

"Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed.

Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware"

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through existing non - metallic rigid PVC conduit and conduit accessories or PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed..NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells

Description all as per item No. 40 here in before but for One fan point controlled by one switch and regulator.

Description all as per item No. 40 here in before but for One 05 amps fan point controlled by one switch and regulator.

Description all as per item No. 40 here in before but for One 05 amps socket outlet on the same board with other switches

Description all as per item no :40 but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core fixed on wall/ceiling of suitable size and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps power socket outlet .

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Havells

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Havells

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor (Roma)/Indo Asian/Havells

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Havells

Supply and fix Modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.Make -Anchor /Rider/Indo Asian

Supply and fix PVC or Polycarbonate ceiling rose 3 terminal , isolated body of size 63.5 x 20 mm, suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with FRLSH PVC three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Note :Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent in M/S Wipro/CG

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.Make: Wipro LC30-551-XXX-57-G1 or Equivalent price and specification in M/S Philips/CG

Supply and fix Integral LED 35 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver including 20 mm dia GI pipe medium grade and GI bracket of suitable size fixed to pole /wall complete all as directed . Make: Havells Cat Pat No: ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent price and specification of M/S Wipro/CG

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) connected with 3 core size FRLS PVC flexible copper cable Pre wired from ceiling rose to connector complete all as specified and as directed. Make : Orient/CG/Bajaj

Material and labour for 50mm bore GI tube, medium grade as in supports for hanging ceiling fans of 1200/ 1400mm sweep, cut to required length, grouted into wall and making good distured surfaces as required complete all as specified and as directed.

Supply and fix Wall mounting fan, 300 mm sweep, 230 Volts, single phase, Heavy duty with all fixing accessories including provision of suitable Mild steel clamps for fixing to wall and making good disturbed surfaces to match with the existing surfaces and removing unserviceable exhaust fan deposited to MES store complete all as specified and as directed. Make: AlmonardCG/Orient."

Material and labour for GI Down rod for ceiling fan,15 mm dia 1.5m long, duly threaded for check nut and holes drilled for split pin including mild steel bolts and nuts, double washers and rubber reel bush suitable for ceiling fan of 1200mm sweep fixed in repairs complete all as specified and as directed..

Supply and fix in repairs Sheet metal enclosure type TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 4 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed..Note : Make : Indo Asian/L&T/Havells

Supply and fix MCCB TP 125 A 25KA 50HZ AC supply including dismantling old one and taken as credit complete all as specified and as directed. ..Note : Make : Indo Asian/L&T/Havells

Supply and fix in repairs or replacement of Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed..Note : Make : Indo Asian/L&T/Havells

Supply and fix in repairs or replacement of MCB DP 63 A 10KA C series 50HZ AC supply incl dismantling old one, complete all as specified and as directed. .Note : Make : Indo Asian/L&T/Havells

Supply and Fix in repairs or replacement of MCB SP 240 Volt of capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed..Note : Make : Indo Asian/L&T/Havells

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

M/s. N D KALING

M/s B C CHOUGULE

SHRI.H.R.PATIL

ASHOK M RAJGOLKAR

M/s. KIRAN M CHOUGULE

SAMARTH ASSOCIATES

DHANSHRI ENTERPRISES

Vinod Enterprises