Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.8 L+₹9,470 (0.51%)Rejected-Finance SHOP NO 2 JANKI PLAZA BHAGWAN MAHAVIR PATH KOPARGAON AHMEDNAGAR MAHARASHTRA 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹21.3 L+₹2.6 L (14.1%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹24.0 L+₹5.3 L (28.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹24.6 L+₹6.0 L (31.9%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
Garrison Engineer (Maint) Infantry School , Mhow -453441
REPAIR REPLACEMENT OF BR MAINTANANCE AND PERIODICAL SERVICES FOR OTM ACCN AT AGE BRI UNDER GE MISMHOW
2024_MES_640277_1
8624/GE (MIS)/ Mhow
Open Tender
Civil Works - Others
Item Rate
180 days
GE (MIS) Mhow
All as per Tender document
7 documents required · 7 mandatory
₹500
Garrison Engineer (MIS) Mhow
₹60,000
Yes
14 Mar 2024
2 Feb 2024
2 Mar 2024
2 Feb 2024
29 Feb 2024
16 Feb 2024
Amount
M&L for rendering 15 mm thick in CM 1:6 on wall / concrete surfaces finish even and smooth without using extra cement including taking down old /existing plaster of any description complete all as specified .
M&L for applying one coat of 2mm thick wall care putty on walls to make the surface smooth finish all as specified
M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidi proof LW 200ml/50Kg of cement and finished even and smooth without using extra cement and including taking down old cement plaster of any description complete all as specified . Note: Supply only WPC shall be measured and paid separetly under relevant item
M&l for rendering 10mm thick in cement mortar 1:3 on ceiling concrete surface mixed with Dr fixit pidi proof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including taking down of old cement plaster all as specified Note: Supply only WPC shall be measured and paid separetly under relevant item
Supply ony liquid water proofing compound
M&L for preparation of newly plastered surface of wall,pilasters,cornices etc and applying two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified Note : (a) Each stage of work such as Preparation of surface,application of primer,application of first and second coat of painting etc shall be passed by Engineer-in-charge (b) Written warranty for four years shall be funished by the contractor for weather coat painting. (c) Work shall be carried out upto G+3 storied building and quoted rate shall be inclusive of scaffolding,rope,safety devices as required at site
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified
M&L for complete removal of existing treatment of any description from wall /roof projections including facis, cornics etc complete , Internal surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying two coats of oil bound distember with roller complete all as specified
M&L for complete removal of existing treatment of any description from ceiling surface by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying two coats of oil bound distember with roller complete all as specified
M&L for Glazed ceramic coloured tile (glossy series superior quality) of size 300X200mmX7mm thick on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile and over and including 10mm thick rendering in CM 1:4 including dismatling of old tiles of any description complete all as specified.
M&L for Glazed ceramic coloured tile (glossy series superior quality ) of size 300X450mmX7mm thick on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile and over a 10mm thick rendering in CM 1:4 including dismantling of old tiles of any description complete all as specified.
M&L for Non skid ceramic coloured tile 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of the tiles including dismantling of existing of old tiles of any description complete all as specified.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, over & including 15mm thick screed bed in CM (1:4) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including dismantling of existing of old tiles of any description complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including dismantling of old kota stone slab with scrred bed of any description complete all as specified
All as per item No 14 but as in skirting over 10mm thick backing coat in CM (1:4 ) complete all as specified
M&L for gringing and polishing the existing kota stone floor/skirting/dado surfaces by using mechanical grinder and moulding edges complete all as specified and directed.
S&F chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX25 to 30 mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified
M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile and including of dismantling of old interlocking tiles of any description complete all as specified .Note: Sand cushioning shall be measured and paid separately.
M&L for 50mm thick Stone dust filling under floors including watering and consolidation all as specified and directed.
M&L for repair to sunken floor by providing the following water proofing treatment to sunken floor RCC slab surfaces complete all as specified and as per Manufacturer's instructions :- (a) Demolition of old sunken surfaces of any description complete and cleaning of all loose particles and apply cement slurry @ 3.00 kg / sqm oncleaned surfaces by brushing. (b) Provide PCC 1: 1.5:3 type A0 using 12.5mm graded stone aggregate as in slope ,average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or other equivalent as approved, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in CM 1:3 mixed with and including integral waterproofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d) Applying surfaces with bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete on sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/Nahani trap etc complete all as specified (e) After completing sanitary works and laying of all sewage/plumbing pipes with fixtures in position and apply two coats of polymeric based chemical as per manufacturer instructions over bottom and sides of sunken portion upto 600 mm height.
(f) Application of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed. (g) Fill the sunken floor with PCC 1:5:10 type E2 using 40mm gauge brick aggregate. (h) Provide 50 mm dia CPVC pipe 450mm long , projecting clear from fface of outer wall to drain out seepage water if any. (j) Testing of sunken portion for leakage and seepage all as per direction of engineer-in-Charge (NOTE : Floor area only shall be measured for payment ).
Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified .
M&L for 100 mm thick,plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, sub base of floor, etc complete all as specified
M & L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor/ plinth protection and finished the surface even and smooth without using extra cement including filling the expansion joints with bituminous filler / filler boards including necessary form work etc complete all as specified
M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thick as in flooring, coping etc and finish the surfaces even and smooth with using extra cement complete as specified
M&L for providing PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC 1:2:4 , type B1 using 20mm graded stone aggregate and finish the disturbed portion of external surface as per existing complete all as specified
M&L for cutting holes in brick walls built in cement mortar,exceeding one brick but not exceeding two bricks at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortar in CM 1:3 and making good the dismantled portion with PCC (1:2:4) type B1 using 20mm graded stone aggregate and finish the disturbed portion of external surface as per existing complete all as specified
S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including 'P" or "S" trap and connection to trap, and to flushing pipe , anti syphonage pipe, etc complete including making good the floor complete all as specified
S&F in repair wash hand basin, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified
S&F in repairs pedestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC(SWR) 'P' Trap including joint run and lead front or back inlet, connection to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe ,plastic water closet seat cover white closed pattern with flat bottom and cover complete as specified
S&F in repair Vitreous China urinal bowl, half stall coloured, with PTMT urinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, , providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in cement, complete all as specified
S&F in repairs of CP Urinal spreader suitable for 15 mm dia pipe.
M&L for repairing the existing vitreous china urinal half stall type with automatic urinal spreader including change of battery, cleaning of cartage and pipe line etc and make the urinal functionable in all respect complete all as specified and directed.
S& F in repairs mild steel chromium plated health faucet with 1metre SS tube and hook complete all as specified
S&F in repairs chromium plated jet for EWC with 1.00 metre SS pipe including necessary GI fitting as required complete all as specified
S&F in repiar fancy chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule complete all as specified
M&L for repairing low level flushing cistern by adjusting syphon washer,handle, float valve etc as required and making theflushing cistern fuctional in all respct complete all as specified
S&F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified
S&F in repair Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified
S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified
S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified
S&F in repair of CP fancy type stop valve ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified
S&F in repairs CP fancy type Angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified
S&F in repair of CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified
S&F in repairs to spindle brass for Bibcock/ stopcock /Angle cock/pillar cock 15/20mm bore size all as specified
S&F in repairs of CP Brass fancy type shower rose 15mm dia with 125mm long CP Nipple of approved quality complete all as specified
S&F in repairs 15mm dia brass CP for Wall mixier Hot & Hold water screwed down for iron pipe and fixed all as specified
S&F in repairs soap dish chromium plated brass fixed with brass nuts
S&F in repair toilet paper holder brass chromium plated
S&F in repair towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilteis embedded in cement mortar (1:3) with MS screws etc complete all as specified
S&F in repair PVC valveless, symphonic action type flushing cistern,low/high level 10 liters capacity white with inlet ball valve float and handle including brackets complete all as specified
S&F in repairs PVC flush pipe 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified
S&F in repairs brass chromium plated waste coupling 32mm bore for WHB complete all as specified.
S&F in repair of 20/25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified
S&F PVC waste pipe fixed to any type of coupling not exceeding 1.50m length complete all as specified
S&F in repair rotational moulded polyethylene water storage tank (double layer) 500 Litres capacity (cylindrical/vertical with closet top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polyethylene float and fly nut for 20mm bore complete
S&F in repair rotational moulded polyethylene water storage tank (double layer) 1000 Litres capacity (cylindrical/vertical with closet top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polyethylene float and fly nut for 20mm bore complete
S&F in repair rotational moulded polyethylene water storage tank (double layer) 2000 Litres capacity (cylindrical/vertical with closet top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polyethylene float and fly nut for 20mm bore complete
M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500/ 1000 litres capacity complete all as specified.
M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 litres capacity complete all as specified.
S&F in repair gun metal gate valves 25 mm with lever arm screwed both ends for iron pipes complete all as specified
S&F in repair of gun metal gate valves 20 mm with lever arm screwed both ends for iron pipes complete all as specified
S&F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified
S&F PVC (SWR) floor trap 75mm dia meter of out let ,plain with grating including jointing with solvent cement complete all as specified
S&F PVC (SWR) multi floor trap 75mm dia meter of out let ,plain with grating including jointing with solvent cement complete all as specified
S&F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete, Model No 555 of PRAYAG or other equivalent as approved complete all as specified
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminized hinging device complete all as specified
S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified
S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified
S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm size
S&F PVC ( SWR) bends any radius bore of 110 mm
S&F PVC ( SWR) bends any radius bore of 75 mm
S&F in repair Drapery rod 25mm dia aluminum alloy powder coated fixed with fancy type matching pair of brackets not less than 75 grams each fixed with screw .
S&F in repair GI tubing 15mm bore medium grade with all fittings and fixed to walls /ceiling or laid in floors l complete all as specified
S&F in repair GI tubing 20mm bore medium grade with all fittings and fixed to walls /ceiling or laid in floors l complete all as specified
S&F in repair GI tubing 25mm bore medium grade with all fittings and fixed to walls /ceiling or laid in floors l complete all as specified
Taking down door shutter with frame not exceeding 1.5 Sqm each without taking off shutter from the frame complete all as specified
S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.
S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm each complete all as specified
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed.
S&F second class hard wood shutter 35mm thick, plain framed panelled factory made (two panels) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.
S&F in repair 19mm thick priliminated particle board both sides with decorative choice lamination including necessary second class hard wood 6mm edging for cup board all as specified
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified
S&F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and an average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified
Haking out old brocken glass pan of any size ( upto Ground + 3 Storied building) thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads all as specified and directed.
S&F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane complete all as specified
S&F sheet glass 3.0 mm thick ( up to Ground +3 storied building) ordinary quality and glazing with oil putty, in squares not exceeding 0.5 Sqm in each pane complete all as specified
S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws complete all as specified
S&F in repair Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified
S&F 100mm long aluminium alloy with galvanised mild steel hinge pin, anodized and fixed B-22
S&F in repair 100mm long aluminium alloy with galvanised mild steel hinge pin, anodized and fixed B-22
S&F in repair 100mm long butt hinges medium weight cold rolled mild steel
S&F in repair 75mm long butt hinges medium weight cold rolled mild steel
S&F Aluminium anodizes barrel tower bolts of 200mm long extruded section
S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section
S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section
S&F 150 mm size aluminium anodized handle
S&F in repiar 150 mm size aluminium anodized handle
S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified
S&F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor
S&F in repair Aluminum plate type II 200mm size hook and eyes all
S&F in repair 40mm wide up to 5mm thick rubber beading fixed to door shutter with nails
M&L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified
S&F in repair 19mm thick prelaminated particle board both sides with decorative choice lamination including necessary second class hardwood 6mm edging for cup board complete all as specified
S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S & F in repair continuos ( Piano) hinges mild steel, bright finish or electro galvanized 30mm width of flap ( When open) complete all as specified
M&L for welding in repairs not exceeding 2.5 cm in length,thickness of metal exceeding 9mm but not exceeding 20mm complete all as specified
M&L for writing building number , letters or figures (Block, Roamn, Italic or Indian) of height not less than 50 mm and not less than 15mm width with synthetic enamel paint including preparation of surfaces complete all as specified and directed.Note:Number of letter not exceeding 10 Nos in each building and measured as one Job.
S&F in repairs false ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm ofapprovedtexture, design and pattern pinhole 8mmthick semiperforated square edge tile having NRC( noise reduction cogfficient ) of 0.50(minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476(PART-4) fire performance as per BS : 476(PART 6&7) humidity resistence of 100% thermal conductivity <0.043W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on silhouuetter proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32MM of lenght1200mm and secondary intermediate cross-T of size 15 X32mm of lenght 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steel item, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall/Partition with the help of plastic rawl plugs at 450mm cetre and 40mm long dry wall SS screws complete all as specified and directed
S&F in repair 4mm thick non asbestos cement plain building boards, fixed to wooden frame work with screws including preparation of new surfaces and applying two coat of wite wash in ceiling complete all as specified and directed.
M&L for preparation of old plastered surface of wall,pilasters,cornices etc and applying two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified Note : (a) Each stage of work such as Preparation of surface,application of primer,application of first and second coat of painting etc shall be passed by Engineer-in-charge (b) Written warranty for four years shall be funished by the contractor for weather coat painting. (c) Work shall be carried out upto G+3 storied building and quoted rate shall be inclusive of scaffolding,rope,safety devices as required at site
M&L for complete removal of existing treatment of any description from old treated wall surface /roof projections including facia, cornics etc complete , Internal surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying two coats of oil bound distember with roller complete all as specified
M&L for applying minimum 1.00mm to 1.50mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.including complete removal of existing treatment any type of surface make surface clean,free from dust,loose pint etc and all as specified
M&L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified
M&L for preparation of old treated steel surfaces of any description exceeding 10cm in width or girth and applying one coat of synthectic enamelled paint complete all as specified
M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified
sunway associates
sunrise enterprises
NIDHI CONSTRUCTION
RK CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .