GE/C-55/2021-22 Comprehensive Maint Incl Leakage Seepage Railing Rain Water Pipe and Misc Repair Of MD Accn At Pratap Chowk Arjan Vihar Taurus Enclave NPC and Sewage Installation Sewage Pump And Misc Work in the Area of AGE BR II and AGE E M under G

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M & L for brick work with sub class 'B' bricks old size bricks straight or curved on plan exe 6m mean radius built in CM 1:4 complete all as specified.

All as per srl item No 2 here in before but except bricks

S & F MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290-0 including Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified upto six storey height.

M&L PCC 1:2:4 type B1 as in blocks for holdfast,coping,benching etc. including weathering,slightly rounded or chamfered angles or throating all as specified incl necessary steel scaffolding..

M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position complete all as specified.

M & L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement complete all as specified.

M & L for preparation of newly plastered surfaces of walls/ ceilings/ chajjas/ roof projection etc and applying two coats of weather proofing exterior acrylic emulsion paint premier quality on wall surface over one coat of primer from the same manufacturer complete all as specified and directed upto a height of G+5

M&L for preparing of newly plastered surface and applying two coat of building grade bitumen 85/25 @ 1.2Kg/Sqm in each layer on roof surfaces complete all as specified and directed.

Cuting shrubs wild growth/tree not exc 30 cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick work and making good the disturbed surface with PCC 1:2:4 type B0 and disposing the rubbish from site (MOD land) for a block of eleven flats of six storey height, complete all as specified.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified.

S&F in repair of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified.

S & F in repair chicken wire mesh standard thickness and aperture all as specified and directed by Engineer-in-charge.

M&L water proof treatment to RCC roof slab by providing 50 mm average thickness PCC 1:2:4 incorporting CONPLAST WL (water prooof compound) in the proportion as directed by the manufacturer and apply on damp PCC surface, first coat of Brush Bond RFX and again apply second coat of Brush Bond RFX after drying of first coat (average 1 - 1.5 mm thickness) and on completion, provide 25 mm thick PCC 1:2:4 mix (4 parts of 10mm nominal coarse aggregate, 2 parts of fine aggregate & 01 part of cement) cement concrete screed and then finsh the top sufurace even and smooth without using extra cement . The compete roof shall be tested by ponding of water for 24 Hrs complete all as directed at site. Note :- Brush bond RFX liquid, powder and conplast WL shall be of FOSROC or equivalent in Star/Pidilite.

Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified.

All as per item no.16 here-in-before but dia of GI pipe is 15mm.

S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified an directed.

All as per item no.18 here-in-before but dia of GI pipe is 15mm.

Refixing old steel tubing of 20mm dia and connections in new or old position (Walls, ceiling, floors, etc.) compete all as specified and directed

Refixing old steel tubing of 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.)

Disconnecting existing tanks of exc 500 ltr and n exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Cleaning and removing all scale and dirt, etc, from tanks of 1000 ltr capacity and from mouths of circulating pipes, etc.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 500 litres and n.exc 1000 litres capacity of any condition or type incl complete all as specified and directed.

M& L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M& L for PVC Rubber Moulded Chequerred Concrete Tiles 30 cm x 30 cm x 25mm thick with coloured cement & pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in floor in C M 1:6 including cement concrete 1:2:4 type B 1 (20mm graded stone aggregate) as in levelling course 25mm thick including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M&L Machine cut kota stone slab of size 550x550mm flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror polished over 20mm thick screed bed in CM 1:4 incl demolition of existing flooring/steps/jambs etc all as specified and as directed.

M & L Machine pressed precast concrete rubber moulded interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 Grade including cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base 75mm thick and 25 mm thick sand cushioning including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge.

Taking down & refixing shutters of any description exc 1 sqm but n.exc 2 sqm each after easing and repair for adjustments etc., complete all as specified.

Taking down shutter not exc 1 sqm each of any description complete all as specified.

Taking down shutter exc 1 sqm but n.exc 2 sqm each of any description complete all as specified.

Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (with shutter without taking off shutter) complete all as specified.

M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts to each leaf of shutter and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.

S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.

M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door boltsand to each leaf of shutter two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.

S& F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats (incl two nos 100 mm long extruded aluminium tower bolts, two nos 75mm long medium weight MS butt hinges, 01 nos 125 mm long extruded aluminium handles to each leaf and two coats synthetic enamel paint along with one coat of pink primer) all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting

S&F solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supply & Fixing in opening, complete all as per specification and as per drawing on Sl page 150

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick(stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing complete.

S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 100mm complete all as specified.

S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 75mm complete all as specified.

S & F 300mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast alluminium alloy, complete all as specified.

S&F 200mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.

S&F 125mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.

S&F 100mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.

S&F aluminum alloy handles extruded fabricated type, anodised of 150 mm size complete all as specified.

S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified.

S & F MS helical door spring 150 mm in repair complete all as specified.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.

S&F in repairs Stainless Steel 2 lever mortice lock vertical type 100mm complete all as specified

M&L for preparing new wooden surfaces of any desctiption not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of white lime washing, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying one coats of colour lime washing, complete all as specified.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of colour lime washing, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old decorated surface(Plastered or unplastered) of ceiling by washing, rubbing down and stopping of old surface and applying one coat of white lime ash complete all as specified and directed by Engineer-in-Charge.directed.

M&L for Preparation of old painted surfaces of wood of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one or more coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.(Note-Payment shall be made for one coat only ).,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying One coat of synthetic enamel paint, complete all as specified.

M & L preparing old surface of wall with sand papers etc. including washing, rubbing, filling holes,and uneven surface, finishing old surfaces with sand papers, filling in wall care putty in holes again sand papering thus making smooth surface to receive a coat of alkali resistant primer over already prepared surfaces of walls and applying one or more coat of oil bound distemper on wall surfaces to give an even and smooth surface using roller brush all as specified and directed.

M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of alkali resistant primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge..

M&L for complete removal of existing treatment of wall and applying one coat of plastic emulson paint upto 1.20m height of wall, complete all as specified and directed by Engineer-in-Charge.

M&L Complete removal exising old surfaces of wall / ceiling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying one coats of weather proofing exterior acrylic emulsion paint from manufacturer complete all as specified and directed by Engineer-in-Charge.

M&L for ready mix plaster of 15mm thick on brick or concrete surface incl necessary cement slurry with buld density 1.40 to 1.70 kg water ratio 17 to 19% by wt & compressive strength as per IS 4031 Part VI. Applied as per manufacturer instruction incl taking down old plaster and applying three coat of white wash on prepared new plastered surface.

M & L for 10 mm thick rendering cement plaster in cement mortar 1:4 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick internal renderingcement plaster in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying two coats of oil bound distemper with roller brush (white or tinted) over a coat of 2 to 3mm thick chalk whitening wall putty over one coat of alkali resistant primer on plastered surfaces on newly plastered wall surface including taking down old plaster complete all as specified.

S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4"/ 6", Reducer, Plug, Tank connection of 1/2" in existing pipe line of 15 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.

S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, Tank connection of 3/4" in existing pipe line of 20 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, Laid, bedded and pointed in any mortar aprons etc.

S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished,light shade, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified.

All as per item no. 70 here-in-before but on vertical surfaces of wall as in skiting / dado over 10 mm thick rendering in CM 1:4 including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) including dismantling the existing tiles with screed and removal of malba out complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 ,including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.

S&F in repair CI floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) dia of out let 75mm complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous chinaware coloured wash hand basin of size 580mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge

S&F in repair vitreous china squatting pan of orissa pattern long pan size 510 x 400 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection pipe of 1/2"x18" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed by Engineer-in-Charge.

S&F in repair of PTMT bib tap fancy type with flange 15mm dia screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP grating 125mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified and directed by Engineer-in-Charge.

S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) as in slab or roof parapet,fins, facia, chajja, beams, etc and similar work (reinforcement cutting as required to facilitate the demolition) upto 5 to 6 storey bldg on roof including scaffolding and removal of debris on daily basis out of MoD land. Note (a) Proper netting shall be used during the demolition and execution of work so that the demolished materials and other construction material may not fall from the building end safety of sassests & human life is guarded. (b) Safety arrangements as per standard engineering practice shall be made during the whole period of execution of work by the contractor at his own cost for the occupants & for his workers/labours and nothing extra shall be paid on this account including any damage if occurs shall be complete responsibility of contractor. (c) It shall be the sole responsibility of contractor that during execution of work on roof top if any damage occured to building or otherwise , the same shall be made good by contractor at his risk cost and nothing shall be paid extra for this.

M&L chipping out, roughening and cleaning spalled/ loose concrete as in RCC columns, beams, slabs, chajjas, parapets, fins and the like members upto 25 mm avarage thickness, washing with water and allowed to dry including derusting existing reinforcement with approved chemical. Supply and fix Mild Steel square wire mesh 65x65x2mm as strengthening reinforcement, applying anti-rust chemical on new wire mesh and guninting chipped surfaces upto 25mm (average) thick with pressure of 2.5 to 3.00 kg/Sqcm, using one part of OPC 43 grade cement and two parts of Ghaggar sand mixed with approved admixture and achieving an even surface including rendering 15mm thick plaster with CM 1:4 finished even smooth without using extra cement finished even and smooth surface . Work to be carried out in patches for buildings upto 18 meter height. Anti-rusting, adhesive, admixure chemical shall be of apporved make and incorporated as intructed by the manufacturer for specific application.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified

S&F 18/19mm thick PVC moulded solid board one side prelam for cabinet boxes etc with self and shutter full size fitted under/above the kitchen cooking platform and other platform complete all as specified and directed as per drg incl provn of fixing arrangement

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

S&F in 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished for kitchen cup boards shutters, cabinets, crocery shelf drawers complete all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmincluding taking out existing china ware sink with waste fittings complete all as specified.

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc including aluminium grill complete all as specified.

S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder Coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified.

S&F 4.00 mm thick plain sheet glass and glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified.

M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed.

S & F in repair Stainless steel drapery Rod 25 mm of dia ,with bracket including holders, premium balls complete incl taking down old pelmet box all as specified.

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

M&L mild steel work as in trusses purlin/rafter including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L applying two coats of syntheic enamel paint over a coat of red oxide on steel surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified.

S/F in replacement Sluice valve , CI, 100 mm dia ,PN - 1.6 type, complete with spindle ,etc. flanged type, ISI marked

S/F in replacement non return valve CI, 100mm dia PN-1 type flanged complete set ISI marked

S/F in replacement foot valve CI 100mm dia complete with flanged type ISI marked.

S&F in replacement Suction pipe GI medium grade 100mm dia ISI marked

S&F in replacement delivery pipe CI medium grade 100mm dia ISI marked

S&F in replacement GI/CI bend heavy duty 100mm dia ISI marked. Jindal/Tata/Kartar

S/F in replacement Tyre/rubber coupling complete set all as specified and directed by engineer in charge.

S& F in replacement ball bearing suitable size all as specified and directed by Engineer in Charge.

S& F in replacement Voltmeter digital type suitable size all as specified and directed by Engineer in Charge.

S& F Ammeter meter digital type suitable size all as specified and directed by Engineer in Charge.

M & L for dismantling centrifugal pump coupled with electric motor capacity 10 to 15 HP 3 phase 415 V of overhauling the pumpsets including cleaning with kerosene/petrol for removing the scales and replacement of necessary parts of case ring, latern ring, shaft sleeve, CI gland covers with MS studs, ball bearings, coupling key, rubber bush nut & bolts, impeller key, lock washer, gasket, and greasing, re-assembling same in position, testing and commissioning the following capacity pump sets complete all as specified and directed by the Engr-in-Charge.

Taking down existing electric motor capacity 10 to 15 HP, 3 Phase 415V, 50 cycles, AC from foundation/coupling opening the motor cutting and the burnt windings including bearings necessary spares parts, cleaning the sator and water with cleaning agent, rewinding the motor with appropriate gauge of super enamelled copper wire of approved make, insulating winding with same class of insulation, varnishing backing up indication supply and provision of base foundation and fixing with bolts, nuts and re-installation of motor satisfactory perfomance of Engineer-in-charge.

Desludging of existinng sewage sump by mechanical means or manually and removing the sludge in closed container outside MOD land including providing necessary safety equipments to the worksmen deployed all as specified and directed by Engineer in charge.

M&L 50mm thick PCC 1:2:4 type B-2 using 40mm gradded stone aggregate as in floors finished even and smooth.complete all as specified and directed by Engr -In- charge.

M&L machine pressed precast concrete chemical treated interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25 mm thick sand cusion complete all as specified and directed by Engr -In- charge.

M & L for nonskid ceramic coloured tiles in floorl surface 300x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and included 15 mm thick cement mortar secrewed bed in cm (1:6) including roughing of excluding floor, complete all as specified and directed by Engr -In- charge.

M& L second class HW clean swan unframed work complete all as specified and directed by Engr -in-Charge

Supply and Fix in repair 45W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Taking down carefully copper/aluminium point wiring ( light, fan , socket or power) complete fittings fixture such as switches Ceiling roses, pen dents regulators, sockets etc to be measured separately and making good disturbed surfaces of walls, floors etc. complete all as specified & directed

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit with replacement of sunken terminal MS boxes thickness and 3 mm thick hylam sheet cover for terminal boxes for including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :-(a) One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)complete all as specified & directed

All as per items No 131 above but for One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.complete all as specified & directed

All as per items No 131 but Same board.complete all as specified & directed

All as per items No 131 above but One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm S/C as earth wire connected to dolly complete ( socket and switches to be measured and paid separately) complete all as specified & directed

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copperconductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including PVC unsheathed copper conuctor cable of 6 Sqmm size S/C as earthwire.complete all as specified & directed

M&L switch piano flush button type single pole one way 6 Amps complete all as specified and directed by Engineer in charge.

M&L socket outlet 6 Amp flush button type complete all as specified and directed by Engineer in charge.

M&L switch piano flush button type single pole 16 Amps complete all as specified and directed by Engineer in charge .

M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directed by Engineer in charge.

S&F ceiling rose PVC/Polycarbonate type with three terminals complete all as specified and directed by Engineer in charge .

M/L in replacement insulated body, angle holder (metal ring) alongwith LED 9 watt complete all as specified and directed. As per sample

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12sqm area of clear opening and cleaning the sides of shutters suspensions shafts, anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and directed

S&F in repairs mild steel lock plate & handles made of Flat Iron 35x5mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-Charge

Schedule of Credit

S D Constructions

GIAN ENGINEERS

imran construction company

M/S ANIL KUMAR