Repair/Replacement of joinery and other misc B/R items of works at Bana Singh Enclave 180 ORs Mahipal Pur and OTM Accn (35 Brigade, 5/11 BR Bogra, 18 Madras) and Rep/Maint of roof, parapet, chajja, leakage/seepage and misc B/R works in OTM Accn (5/11

Amount

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-Charge.

All as per item No. 02 above but exceeding 1.50 sqm and not exc. 4.00 sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling and fixing in opening as per specification and drawing, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel butt hinges, size 100 mm, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel barrel tower bolts, 150 mm long, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel handles, 150 mm long, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width or aperture 1.40mm, fixed with tinned tacks or galvanized wire staples to doors/steel windows, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required, complete all as specified and directed by Engineer-in-Charge.

S&F 40mm wide continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed by Engineer-in-Charge.

S&F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium anodised, complete all as specified and directed by Engineer-in-Charge.

S&F in repair drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc., complete all as specified and directed by Engineer-in-Charge.

S&F in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type, complete all as specified and directed by Engineer-in-Charge.

S&F in repair powder coated anodised aluminium as in frame & shutter of door, window, ventilators and shutter etc. with one or more rebates including joining cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick ordinary quality glass, frosted on one side, in square n exc 0.50 Sqm each pane, fixed with aluminium beading in aluminium window/ventilation etc complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium barrel tower bolts of extruded section, 200mm long complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium butt hinges 100mm size medium duty weight complete all as specified and directed by Engr-in-Charge.

M&L for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L for 150 mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.

Dismantling wall & ceiling boards of any description and thickness including cover fillets, complete all as specified and directed by Engineer-in-Charge.

S&F MS suspended gypsum board false ceiling, gyp board of 12.50mm thick gypsum board of size 595x595mm including necessary frame work of steel GI frame work constating intermediate channel of 15x45x0.9mm thick fixed at 600mm spacing suspended with MS fiat 25x3mm suspenders fixed to GJ angle deal fixed to structural members as directed. The perimeter channel of size 20x27x30x0.5mm thick shall be fixed at junction of wall and ceiling with scrump and rawal plugs at 600mm centre to centre at a required height of including two coats of acrylic emulsion and one coat of primer, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge.

S&F of pre painted galvatume Zinc Aluminium Colour Coated (PZAC) based plain sheet, high tensile strength 550mpa, 0.5 mm thick as in ridge of roof including fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed by Engr-in-Charge.

Hacking out old brocken glass of (any thickness, size, quality or description) from aluminium fram/ beadings etc, complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick glass sheet ordinary quality frosted on one side, n.exc 0.5Sqm in each pane, fixed to aluminium/MS windows with oil putty or beading, complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc, including removing the rubbish out the the MoD land complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster with ready mix plaster (as per mainufaturing,s instruction) on fair faces off wall or concrete surface finsished even and smooth (with out using extre cement) Up to (G+4 Story building including scaffolding) complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick cement plaster with ready mix plaster (as per mainufaturing,s instruction) on fair faces off wall or concrete surface on ceiling finsished even and smooth (with out using extre cement) Up to (G+4 Story building including scaffolding) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of white putty on whole surface to obtain an even and smooth wall surface, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in roof and flooring any descreption and in any position including removal of debrish outside of MoD Land complete all as specified and directed by Engr-in-Charge.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and directed by Engr-in-Charge.

M&L 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) in patches area exe 3.0 sqm as in flooring/roof pedding, finished even and smooth without using extra cement, including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Balcony Parapet wall) complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) 1:2:4 (20 mm graded stone aggregate) as in fins, fascias, louvres, parapets, and railings exc 60 cm in height, newels, balustrade, and the like complete all as specified and directed by Engr-in-Charge.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed by Engr-in-Charge.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better, fair finishes complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from outside the MoD land complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Taking downn eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and directed by Engr-in-Charge.

S&F for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and directed by Engr-in-Charge.

S&F for PVC (SWR) bends of radius, suitable for 75mm dia PVC pipes fixed complete all as specified and directed by Engr-in-Charge.

Taking up or down 15/20mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings (such as Tee, bend, elbow, union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings (such as Tee, bend, elbow, union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engr-in-Charge.

Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed by Engr-in-Charge.

Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed by Engr-in-Charge.

Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work, complete all as specified and directed by Engr-in-Charge.

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and directed by Engr-in-Charge.

Dismantling of water tanks of any type/pattern not exc 500 ltr and removing from site of work, complete all as specified and directed by Engr-in-Charge.

M&L for rotational moulded polythylene water storage tanks three layer of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and directed by Engr-in-Charge.

Dismantling of water tanks of any type/pattern exc 1000 ltr and not exc 2000 ltr removing from site of work, complete all as specified and directed by Engr-in-Charge.

M&L for rotational moulded polythylene water storage tanks three layer of capacity 2000 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and directed by Engr-in-Charge.

S&F 25 mm thick insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick single side prelam PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed by Engr-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

M/S.Parmod Johar

VIJAY KUMAR GUPTA