Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.7 LAccepted-AOC PARSHU RAM NAGAR DADAR KHURD DISTT KORBA C G 495682 | DADAR KHURD | KORBA | CHHATTISGARH | 495682 | L-1 | Accepted-AOC The work is being awarded to the L-1 bidder GAJENDRA KUMAR, vide Ref. No. SECL/GM/KSA/C/22-23/521, Dtd 23.11.2022. | |
| 2 | L-2₹11.4 L+₹1.5 L (15.2%)Rejected-Finance ADARSH NAGAR KUSMUNDA KORBA CG | KORBA | KORBA | CHHATTISGARH | L-2 | Rejected-Finance Rejected being L-2 bidder | |
| 3 | L-3₹12.6 L+₹2.7 L (27.4%)Rejected-Finance GEVRA BASTI KUSMUNDA DIST KORBA CHHATTISGARH 495454 | KUSMUNDA | KORBA | CHHATTISGARH | 495454 | L-3 | Rejected-Finance Rejected being L-3 bidder | |
| 4 | L-4₹16.6 L+₹6.7 L (68.1%)Rejected-Finance B 71 VIKAS NAGAR COLONY NEAR GURUDWARA KUSMUNDA DIST KORBA C G 495454 | KORBA | CHHATTISGARH | 495454 | L-4 | Rejected-Finance Rejected being L-4 bidder |
Tender Value
₹20.8 L
EMD Value
₹26,100
Closing Date
4 Nov 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
STAFF OFFICER (CIVIL), SECL KUSMUNDA AREA
OFFICE OF THE STAFF OFFICER (CIVIL), SECL KUSMUNDA AREA P.O. KUSMUNDA COLLIERY 495454 DISTT. KORBA (CG) CONTACT No. 9425533008
Upgradation of VIP rooms Conference hall and Dining hall of Kusmunda House and replacement of Profile sheet of TA Office Kusmunda Area.
2022_SECL_259699_1
SECL/GM/KSM/CIVIL/ e-Tender/22-23/45 Dt 18.10.22
Open Tender
Civil Works - Others
Item Rate
45 days
KUSMUNDA AREA, SECL
AS PER NIT and TENDER DOCUMENT
3 documents required · 3 mandatory
₹26,100
23 Nov 2022
19 Oct 2022
7 Nov 2022
20 Oct 2022
4 Nov 2022
20 Oct 2022
20 Oct 2022 - 27 Oct 2022
Amount
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Provision of boster for enhancement of water pressure for four VIP Suits in toilets. All complete as per instruction of Engineer-in-charge.
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat
Providing and placing Nilkamal Alexander TV Cabinet with necessary fittings etc. all complete as per instruction of Engineer-in-charge. (as per drwaing enclosed.)
Providing and fixing UPVC Window (make skyler) with glass and SS wire mesh necessary fittings etc. all complete as per instruction of Engineer-in-charge.
Making wardrob of size 6' x 6'3'' of 2' depth using material 18 mm ply in outer side, 6 mm ply 1 mm thick standard mica using mica inner with 16'' slider and other required materials like favicol nails screw with vanity mirror with opneable door with good quality knobs, handle (fancy) etc. all complete as per instruction of Engineer-in-charge.
Assistance for dismanteling of old wardrob with finishing of all lead and lift etc. all complete as per instruction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and Fixing Roller curtain with necessary fitting etc. complete as per instruction of Engineer-in-charge.
Providing and Fixing LED Rope Light for ceiling with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and Fixing Decorative LED Light for ceiling with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and Fixing Decorative LED Light for wall with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and Fixing Scenery size 27''x 51'' with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and Fixing Focusing Light 6w to 12w LED Light for wall Scenery with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and Fixing Decorative Flower pot (Brss) with necessary fitting etc. all complete as per instruction of Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .ost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm)
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 369 mm
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
Total impact of GST for the purpose of CTC
ABKASH SINGH
SARVESH JHA
M/s Yugesh Prasad Singh
stage.html
html • 0.04 MB
techsummary_268560.pdf
PDF • 8.06 MB
finsummary_268560.pdf
PDF • 8.06 MB
AOC45.pdf
PDF • 5.15 MB
finance_268560.pdf
PDF • 0.09 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .