E-Tender for New water supply connection, pipe fitting, electric wiring of office building, chain link fencing and gate pillar construction at Bhishnur site Under Penganga Subdivision Yavatmal

New water supply connection, pipe fitting, electric wiring of office building chain link fencing and gate pillar construction of Bhishnur

Providing and fixing polyethylene aluminium -polyethylene PE-AL-PE composite pressure pipes confirming to IS-15450, U.V stabilized with carbon black having thermal stability for hot & cold water supply capable to withstand temp. up to 80’c,including all special fitting of composite material ( engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers & connectors.etc, with trenching, refilling, and testing of joints complete as per direction of the engineer in charge.External work (code DAR 2019 SI.No 18.3.4)

Providing and fixing brass bib cock of approved quality 20 mm nominal bore (code DAR 2019 SI.No 18.15.2)

Providing and fixing brass stop cock of approved quality 20 mm nominal bore (code DAR 2019 SI.No 18.16.2)2)

fitter for plumbing work ( 2 nos. fitter for 2 days) (code DAR 2019 SI.No 0116)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (code DAR E&M 2018 SI.No 1.21.2

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (code DAR E&M 2018 SI.No 1.17.20 and 1.17.11 2 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (code DAR E&M 2018 SI.No 1.17.20 and 1.17.11 2 x 2.5 sq. mm

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 A TP&N (code DAR E&M 2018 SI.No 2.1.1)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (code DAR E&M 2018 SI.No 2.10.2) Single pole and neutra

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (code DAR E&M 2018 SI.No 1.10.2)

Supplying and fixing PVC batten/ angle holder including connection etc. as required. (code DAR E&M 2018 SI.No 1.58)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.’(code DAR E&M 2018 SI.No 1.45)

Installation of exhaust fan in the existing opening, including making well the damage, connection, testing, commissioning etc. as required. (code DAR E&M 2018 SI.No 1.50.2)

Dismantling steel work in single sections including dismembering Channels, angles, tees and flats (40x40x5mm=3 kg/m) (Code DAR 2019 SI. No 15.17.2)

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 meters lead as per direction of Engineer in- charge Charge (code DAR 2019 SI. No 15.1)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil (code DAR 2019 SI. No 2.6.1)

P.C.C. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (code DAR 2019 SI. No 4.1.8)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (code DAR 2019 SI. No 5.1.2)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) (code DAR 2019 SI. No 5.2.2) Column For Gate ( 0.40+0.30+0.30+0.10+1.60=2.70)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (code DAR 2019 SI. No 5.22.1)

Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete (code DAR 2019 SI. No 5.9.1)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (code DAR 2019 SI. No 6.4.2)

Providing and laying in position cement concrete of specified grade for coping excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (code DAR 2019 SI. No 4.1.3)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). (code DAR 2019 SI. No 13.11)

White washing with lime to give an even shade New work (three or more coats) (code DAR 2019 SI. No 13.37.1)

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (code DAR 2019 SI. No 10.1)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (code DAR 2019 SI. No 16.71)

AKSHAY ASHOK WATHORE