SCADA and F and G system for ETBPNMTPL Natural Gas Pipeline Project(GP-1 TO 9)

Amount

GROUP-1: ENNORE-IP101 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

Thiruvallur (SV-103)

SV Locations

Harsha Exito RT

Hyundai RT

Saint Gobain RT

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

MCS Server as per technical specifications

MCS operator workstations / terminals as per technical specifications

SIC terminal as per technical specifications

Remote Work station as per technical specifications

Programming Terminal for SCADA

Historian Server as per technical specif

"Industrial Grade Programming Terminal (Laptop) for RTUs as per technical specifications "

Web Server as per technical specifications

OPC Server as per technical specificati

GPS Time Server for time synchronization of all MCS / SCC computers and control system computers as per the tender specifications

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc complete in all respects as per the tender specifications & datasheet.

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN with networking software, cables & connectors etc. complete inall respects as per tender specifications.

WAN Router (16 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender specifications

WAN Router (8 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender specifications

Unified Threat Management as per technical specification

Supply & installation of industrial grade Optical to Ethernet converter with required connectors, cables, power supply etc. as per tender specifications. (1 Set Comprises 02 converters)

NTU for MPLS Lines with G.703 interfaces/ other interfaces complete with cable connectors etc.

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

GSM/ GPRS Router/ Gateway/ Network Manager for RTU connectivity with required cables & connectors as per tender specifications

Print Server for dual ethernet connection of printer

Console Desk ( 4 Sections)suitable for mounting of all the SCC computers, telephone instruments, conference set, station logbook etc, complete as per tender specifications & datasheet.

Server Cabinet along with draw out type LCD, Keyboard and KVM switch complete for mounting of various IT hardware like SCADA servers, PAS server, network video recorder of CCTV system, network hardware etc complete as per tender specifications & datasheet.

WP Push Button Control Panel for GOOA operation and PT, TT indication as per tender specifications

UPS (Online) as per tender specification

7.5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 7.5 KVA UPS.

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS..

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

Furniture & fixtures complete as per Tender Specifications.

Swivel Chairs

Table for SIC Terminal

Table for printers

Software including one time license fee for the following

RTU programming /configuration software etc. as per technical specifications

SCADA software including MMI Software (including one time licence fee) etc. as per tender specification, for MCS SCADA servers /MCS operator workstations / Remote Work stations/ SIC terminal (as applicable for different stations):

Alarm Management System software for Email / SMS notification of critical alarms

Network Management System software for multisite networks having different network IDs for a minimum of 500 SNMP / ICMP devices

Programmimg / ladder logic / testing software for RTU test jig including one time license fee

Test Instruments

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Field Configurator for Pressure & Temperature transmitter with Hart protocol

Pressure Calibrator 0 - 20 bar (Portable), accuracy: 0.1%

Pressure Calibrator 0 - 200 bar (Portable), accuracy:0.1%

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accurcay 0.5%

Test jig for RTU similar to the supplied RTUs at manned station equipped with processor module, power supply module, all communication modules, one number IO module of each type, toggle switches, lamps, potentiometers, panel meters etc complete with all hardware and licensed software for testing of various types of IO modules.

Spares

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN as per the main supply.

WAN Router (16 port) system for MCS / SCC connectivity as per the main supply.

WAN Router (8 port) system for MCS / SCC connectivity as per the main supply.

GSM/ GPRS Modem for RTU connectivity with required cables & connectors

RTU Processor Module

RTU Processor power supply

Digital input module

Digital output module

Analog input module

Analog Output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

UPS PCB's, one of each type for 7.5 KVA

UPS PCB's, one of each type for 5 KVA U

Fire and Gas Detection System

"2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with CO2/ FM200 release facilities for automatic fire detection & annunciation of alarms for various types of detectors "

HMI Workstation /Client HMI PC for Fire Alarm System as per tender specifications

HMI Software for Fire Alarm System as per tender specifications

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Addressable Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (addressable) along with all mounting & other accessories asper the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Addressable Hooters (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

Portable Gas Detector with controller, audio-visual alarm and suitable (intrisically safe) for hazardous area classified as classification Class I, Div. I Group C&D as per API-RP-500 as per tender specification

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-1: ENNORE-IP101 SCADA_TN_SERVICES

Supervison, erection, testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

Supervison, erection, testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

At Master Station

At Remote Work Station location

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

Thiruvallur (SV-103)

SV Locations

Harsha Exito RT

Hyundai RT

Saint Gobain RT

IP location

Training on supplied system (including RTU system, SCADA, PAS, F&G etc)

Decommissioning of IT hardwares of Ennore MCS as per tenedr specifications and instructions of Engineer In Charge/ Site Engineer

Fire and Gas Detection System Services

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable detectors of various types such as multisensore detectors, optical smoke detectors, rate of rise heat detectors, manual call points, hooters, beacons etc including Clean Agent System system for switchyard, HT Building consisting of MCC room, transformer room, VFD room, HT/ LT room and other equipment room etc. and pumping sheds, piping area, including laying of all type of cables, energizing & testing of the complete system with simulation and also demonstration of working of the complete system,commissioning of the complete system including interface with the safety PLC system, the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Erection, testing & commissioning of HMI Workstation For Fire Alarm System including the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-1: ENNORE-IP101 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4thYear

AMC for 5th Year

GROUP-2: IP101-IP102 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-2: IP101-IP102 SCADA_TN_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations

IP location

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-2: IP101-IP102 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (TN State)

AMC for 2nd Year (TN State)

AMC for 3rd Year (TN State)

AMC for 4thYear (TN State)

AMC for 5th Year (TN State)

GROUP-2: IP101-IP102 SCADA_PC_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-2: IP101-IP102 SCADA_PC_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-2: IP101-IP102 SCADA_PC_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (PC State)

AMC for 2nd Year (PC State)

AMC for 3rd Year (PC State)

AMC for 4thYear (PC State)

AMC for 5th Year (PC State)

GROUP-3: IP102-IP103 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

SIC terminal as per technical specifications

Remote Work station as per technical specifications

"Industrial Grade Programming Terminal (Laptop) for RTUs as per technical specifications "

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc complete in all respects as per the tender specifications & datasheet.

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN with networking software, cables & connectors etc. complete inall respects as per tender specifications.

WAN Router (8 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender specifications

Unified Threat Management as per technical specification

Supply & installation of industrial grade Optical to Ethernet converter with required connectors, cables, power supply etc. as per tender specifications. (1 Set Comprises 02 converters)

NTU for MPLS Lines with G.703 interfaces/ other interfaces complete with cable connectors etc.

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

Print Server for dual ethernet connection of printer

Console Desk ( 4 Sections)suitable for mounting of all the SCC computers, telephone instruments, conference set, station logbook etc, complete as per tender specifications & datasheet.

Server Cabinet along with draw out type LCD, Keyboard and KVM switch complete for mounting of various IT hardware like SCADA servers, PAS server, network video recorder of CCTV system, network hardware etc complete as per tender specifications & datasheet.

7.5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 7.5 KVA UPS.

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

Furniture & fixtures complete as per Tender Specifications.

Swivel Chairs

Table for SIC Terminal

Table for printers

Software including one time license fee for the following

RTU programming /configuration software etc. as per technical specifications

Test Instruments

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Field Configurator for Pressure & Temperature transmitter with Hart protocol

Pressure Calibrator 0 - 20 bar (Portable), accuracy: 0.1%

Pressure Calibrator 0 - 200 bar (Portable), accuracy:0.1%

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accurcay 0.5%

Test jig for RTU similar to the supplied RTUs at manned station equipped with processor module, power supply module, all communication modules, one number IO module of each type, toggle switches, lamps, potentiometers, panel meters etc complete with all hardware and licensed software for testing of various types of IO modules.

Spares

WAN Router (8 port) system for MCS / SCC connectivity as per the main supply.

GSM/ GPRS Modem for RTU connectivity with required cables & connectors

RTU Processor Module

RTU Processor power supply

Digital input module

Digital output module

Analog input module

Analog Output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

UPS PCB's, one of each type for 7.5 KVA

Fire and Gas Detection System

"2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with CO2/ FM200 release facilities for automatic fire detection & annunciation of alarms for various types of detectors "

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Addressable Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (addressable) along with all mounting & other accessories asper the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Addressable Hooters (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-3: IP102-IP103 SCADA_TN_SERVICES

Control System & SCADA Services

Supervison (of erection), testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

At Remote Work Station locations

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

IP location

Fire and Gas Detection System Services

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable detectors of various types such as multisensore detectors, optical smoke detectors, rate of rise heat detectors, manual call points, hooters, beacons etc including Clean Agent System system for switchyard, HT Building consisting of MCC room, transformer room, VFD room, HT/ LT room and other equipment room etc. and pumping sheds, piping area, including laying of all type of cables, energizing & testing of the complete system with simulation and also demonstration of working of the complete system,commissioning of the complete system including interface with the safety PLC system, the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-3: IP102-IP103 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4thYear

AMC for 5th Year

GROUP-4: IP103-IP104 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

SIC terminal as per technical specifications

Remote Work station as per technical specifications

"Industrial Grade Programming Terminal (Laptop) for RTUs as per technical specifications "

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc complete in all respects as per the tender specifications & datasheet.

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN with networking software, cables & connectors etc. complete inall respects as per tender specifications.

WAN Router (8 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender specifications

Unified Threat Management as per technical specification

Supply & installation of industrial grade Optical to Ethernet converter with required connectors, cables, power supply etc. as per tender specifications. (1 Set Comprises 02 converters)

NTU for MPLS Lines with G.703 interfaces/ other interfaces complete with cable connectors etc.

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

Print Server for dual ethernet connection of printer

Console Desk ( 4 Sections)suitable for mounting of all the SCC computers, telephone instruments, conference set, station logbook etc, complete as per tender specifications & datasheet.

Server Cabinet along with draw out type LCD, Keyboard and KVM switch complete for mounting of various IT hardware like SCADA servers, PAS server, network video recorder of CCTV system, network hardware etc complete as per tender specifications & datasheet.

UPS (Online) as per tender specification

7.5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 7.5 KVA UPS.

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

Furniture & fixtures complete as per Tender Specifications.

Swivel Chairs

Table for SIC Terminal

Table for printers

Software including one time license fee for the following

RTU programming /configuration software etc. as per technical specifications

Test Instruments

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Field Configurator for Pressure & Temperature transmitter with Hart protocol

Pressure Calibrator 0 - 20 bar (Portable), accuracy: 0.1%

Pressure Calibrator 0 - 200 bar (Portable), accuracy:0.1%

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accurcay 0.5%

Test jig for RTU similar to the supplied RTUs at manned station equipped with processor module, power supply module, all communication modules, one number IO module of each type, toggle switches, lamps, potentiometers, panel meters etc complete with all hardware and licensed software for testing of various types of IO modules.

Spares

WAN Router (8 port) system for MCS / SCC connectivity as per the main supply.

GSM/ GPRS Modem for RTU connectivity with required cables & connectors

RTU Processor Module

RTU Processor power supply

Digital input module

Digital output module

Analog input module

Analog Output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

UPS PCB's, one of each type for 7.5 KVA

Fire and Gas Detection System

"2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with CO2/ FM200 release facilities for automatic fire detection & annunciation of alarms for various types of detectors "

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Addressable Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (addressable) along with all mounting & other accessories asper the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Addressable Hooters (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-4: IP103-IP104 SCADA_TN_SERVICES

Control System & SCADA Services

Supervison (of erection), testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

At Remote Work Station locations

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

IP location

Fire and Gas Detection System Services

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable detectors of various types such as multisensore detectors, optical smoke detectors, rate of rise heat detectors, manual call points, hooters, beacons etc including Clean Agent System system for switchyard, HT Building consisting of MCC room, transformer room, VFD room, HT/ LT room and other equipment room etc. and pumping sheds, piping area, including laying of all type of cables, energizing & testing of the complete system with simulation and also demonstration of working of the complete system,commissioning of the complete system including interface with the safety PLC system, the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-4: IP103-IP104 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4thYear

AMC for 5th Year

GROUP-5: IP104-IP105 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-5: IP104-IP105 SCADA_TN_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

IP location

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-5: IP104-IP105 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4thYear

AMC for 5th Year

GROUP-6: SV103-IP201 SCADA_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-6: SV103-IP201 SCADA_TN_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-6: SV103-IP201 SCADA_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (TN State)

AMC for 2nd Year (TN State)

AMC for 3rd Year (TN State)

AMC for 4thYear (TN State)

AMC for 5th Year (TN State)

GROUP-6: SV103-IP201 SCADA_AP_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

IP location

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

SIC terminal as per technical specifications

Remote Work station as per technical specifications

"Industrial Grade Programming Terminal (Laptop) for RTUs as per technical specifications "

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc complete in all respects as per the tender specifications & datasheet.

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN with networking software, cables & connectors etc. complete inall respects as per tender specifications.

WAN Router (8 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender specifications

Unified Threat Management as per technical specification

Supply & installation of industrial grade Optical to Ethernet converter with required connectors, cables, power supply etc. as per tender specifications. (1 Set Comprises 02 converters)

NTU for MPLS Lines with G.703 interfaces/ other interfaces complete with cable connectors etc.

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

Print Server for dual ethernet connection of printer

Console Desk ( 4 Sections)suitable for mounting of all the SCC computers, telephone instruments, conference set, station logbook etc, complete as per tender specifications & datasheet.

Server Cabinet along with draw out type LCD, Keyboard and KVM switch complete for mounting of various IT hardware like SCADA servers, PAS server, network video recorder of CCTV system, network hardware etc complete as per tender specifications & datasheet.

UPS (Online) as per tender specification

7.5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 7.5 KVA UPS.

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

Furniture & fixtures complete as per Tender Specifications.

Swivel Chairs

Table for SIC Terminal

Table for printers

Software including one time license fee for the following

RTU programming /configuration software etc. as per technical specifications

Test Instruments

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Field Configurator for Pressure & Temperature transmitter with Hart protocol

Pressure Calibrator 0 - 20 bar (Portable), accuracy: 0.1%

Pressure Calibrator 0 - 200 bar (Portable), accuracy:0.1%

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accurcay 0.5%

Test jig for RTU similar to the supplied RTUs at manned station equipped with processor module, power supply module, all communication modules, one number IO module of each type, toggle switches, lamps, potentiometers, panel meters etc complete with all hardware and licensed software for testing of various types of IO modules.

Spares

WAN Router (8 port) system for MCS / SCC connectivity as per the main supply.

GSM/ GPRS Modem for RTU connectivity with required cables & connectors

RTU Processor Module

RTU Processor power supply

Digital input module

Digital output module

Analog input module

Analog Output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

UPS PCB's, one of each type for 7.5 KVA

Fire and Gas Detection System

"2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with CO2/ FM200 release facilities for automatic fire detection & annunciation of alarms for various types of detectors "

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Addressable Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (addressable) along with all mounting & other accessories asper the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Addressable Hooters (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-6: SV103-IP201 SCADA_AP_SERVICES

Control System & SCADA Services

Supervison (of erection), testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

At Remote Work Station locations

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

IP location

Fire and Gas Detection System Services

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable detectors of various types such as multisensore detectors, optical smoke detectors, rate of rise heat detectors, manual call points, hooters, beacons etc including Clean Agent System system for switchyard, HT Building consisting of MCC room, transformer room, VFD room, HT/ LT room and other equipment room etc. and pumping sheds, piping area, including laying of all type of cables, energizing & testing of the complete system with simulation and also demonstration of working of the complete system,commissioning of the complete system including interface with the safety PLC system, the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-6: SV103-IP201 SCADA_AP_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (AP State)

AMC for 2nd Year (AP State)

AMC for 3rd Year (AP State)

AMC for 4thYear (AP State)

AMC for 5th Year (AP State)

GROUP-7: IP201-BENGALURU SCADA_AP_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

1 Phase 2 wire (230 V) applications

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-7: IP201-BENGALURU SCADA_AP_SERVIC

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-7: IP201-BENGALURU SCADA_AP_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (AP State)

AMC for 2nd Year (AP State)

AMC for 3rd Year (AP State)

AMC for 4thYear (AP State)

AMC for 5th Year (AP State)

GROUP-7: IP201-BENGALURU SCADA_KA_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

Bengaluru RT

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

IT Hardware

MCS Server as per technical specifications

MCS operator workstations / terminals as per technical specifications

SIC terminal as per technical specifications

Programming Terminal for SCADA

"Industrial Grade Programming Terminal (Laptop) for RTUs as per technical specifications "

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc complete in all respects as per the tender specifications & datasheet.

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

Print Server for dual ethernet connection of printer

Console Desk ( 8 Sections)suitable for mounting of all the SCC computers, telephone instruments, conference set, station logbook etc, complete as per tender specifications & datasheet.

Server Cabinet along with draw out type LCD, Keyboard and KVM switch complete for mounting of various IT hardware like SCADA servers, PAS server, network video recorder of CCTV system, network hardware etc complete as per tender specifications & datasheet.

UPS (Online) as per tender specification

15 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 15 KVA UPS.

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

Furniture & fixtures complete as per Tender Specifications.

Swivel Chairs

Table for SIC Terminal

Table for printers

Software including one time license fee for the following

RTU programming /configuration software etc. as per technical specifications

SCADA software including MMI Software (including one time licence fee) etc. as per tender specification, for MCS SCADA servers /MCS operator workstations / Remote Work stations/ SIC terminal (as applicable for different stations):

Alarm Management System software for Email / SMS notification of critical alarms

Network Management System software for multisite networks having different network IDs for a minimum of 500 SNMP / ICMP devices

Programmimg / ladder logic / testing software for RTU test jig including one time license fee

Test Instruments

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Field Configurator for Pressure & Temperature transmitter with Hart protocol

Pressure Calibrator 0 - 20 bar (Portable), accuracy: 0.1%

Pressure Calibrator 0 - 200 bar (Portable), accuracy:0.1%

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accurcay 0.5%

Test jig for RTU similar to the supplied RTUs at manned station equipped with processor module, power supply module, all communication modules, one number IO module of each type, toggle switches, lamps, potentiometers, panel meters etc complete with all hardware and licensed software for testing of various types of IO modules.

Spares

24 port Industrial Grade dual Ethernet Switches for redundant 100 MBPS LAN as per the main supply.

WAN Router (16 port) system for MCS / SCC connectivity as per the main supply.

GSM/ GPRS Modem for RTU connectivity with required cables & connectors

RTU Processor Module

RTU Processor power supply

Digital input module

Digital output module

Analog input module

Analog Output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

UPS PCB's, one of each type for 15 KVA

Fire and Gas Detection System

"2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with CO2/ FM200 release facilities for automatic fire detection & annunciation of alarms for various types of detectors "

HMI Workstation /Client HMI PC for Fire Alarm System as per tender specifications

HMI Software for Fire Alarm System as per tender specifications

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors with Relay output for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Addressable Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (addressable) along with all mounting & other accessories asper the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Addressable Hooters (for safe area) along with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-7: IP201-BENGALURU SCADA_KA_SERVIC

Control System & SCADA Services

Supervison (of erection), testing & commissioning SCADA systems with all supplied items including network devices and interconnection at stations. This include supply of all labour, consumables, tools, services rendered etc.

At Master Station

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

Bengaluru RT

Training on supplied system (including RTU system, SCADA, PAS, F&G etc)

Shifting and testing of de-commissioned IT hardwares of Ennore MCS to Vendor's works/ Bengaluru ECS and its functional testing as per tenedr specifications and instructions of Engineer In Charge/ Site Engineer

Fire and Gas Detection System Services

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable detectors of various types such as multisensore detectors, optical smoke detectors, rate of rise heat detectors, manual call points, hooters, beacons etc including Clean Agent System system for switchyard, HT Building consisting of MCC room, transformer room, VFD room, HT/ LT room and other equipment room etc. and pumping sheds, piping area, including laying of all type of cables, energizing & testing of the complete system with simulation and also demonstration of working of the complete system,commissioning of the complete system including interface with the safety PLC system, the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Erection, testing & commissioning of HMI Workstation For Fire Alarm System including the cost of allmaterials, labour, consumables, equipments tools & tackles on lump sumbasis as per the specifications & instructions of Site Engineer / EIC.

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-7: IP201-BENGALURU SCADA_KA_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (KA State)

AMC for 2nd Year (KA State)

AMC for 3rd Year (KA State)

AMC for 4thYear (KA State)

AMC for 5th Year (KA State)

GROUP-8: NEW SV & RT_TN_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations with barrel

IP location without barrel

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

UPS (Online) as per tender specification

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS..

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-8: NEW SV & RT_TN_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations with barrel

RT Locations without barrel

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-8: NEW SV & RT_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (TN State)

AMC for 2nd Year (TN State)

AMC for 3rd Year (TN State)

AMC for 4thYear (TN State)

AMC for 5th Year (TN State)

GROUP-8: NEW SV & RT_PC_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations with barrel

IP location without barrel

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

UPS (Online) as per tender specification

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS..

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-8: NEW SV & RT_PC_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations with barrel

RT Locations without barrel

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-8: NEW SV & RT_PC_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (PC State)

AMC for 2nd Year (PC State)

AMC for 3rd Year (PC State)

AMC for 4thYear (PC State)

AMC for 5th Year (PC State)

GROUP-8: NEW SV & RT_AP_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations with barrel

IP location without barrel

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

UPS (Online) as per tender specification

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS..

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-8: NEW SV & RT_AP_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations with barrel

RT Locations without barrel

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-8: NEW SV & RT_AP_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (AP State)

AMC for 2nd Year (AP State)

AMC for 3rd Year (AP State)

AMC for 4thYear (AP State)

AMC for 5th Year (AP State)

GROUP-8: NEW SV & RT_KA_SUPPLY

Instruments

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mounted as per technical specification

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.15% or better. Installation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation as per technical specification

"Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (-26 to 65 0C); Smart type; accuracy 0.15 % or better. Installation: Transmitter 2"" pipe mounted ; RTD in weldpad welded to process pipe surface for below ground installation as per technical specification"

RTU for all locations complete with processor module, I/O modules, relay modules, rack power supplies, dual redundant field interrogation power supply & DC-DC converters, Data Panel , communication ports for GSM / GPRS connectivity, modem for GSM/GPRS connectivity, serial & Ethernet interfaces, necessary operating & application s/w, all interconnecting cables, connectors, RTU cabinet etc. complete in all respects as per I/O list & tender specifications etc.

SV Locations

RT Locations with barrel

IP location without barrel

Barrier as per technical specification

For DI

For AI

SPD as per technical specification

For AI signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) applications

1 Phase 2 wire (230 V) applications

UPS (Online) as per tender specification

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS..

Fire and Gas Detection System

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tenderspecifications.

Intrinsically safe Rate of Rise Heat Detectors (with Relay output) for hazardous areas alongwith all mounting & other accessories as per the tender specifications

Multi sensor detectors (with relay output) along with all mounting & other accessories asper the tender specifications

Reponse Indicators along with all mounting & other accessories as per the tender specifications.

Conventional Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Manual Call Point (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.

Conventional Hooters(for safe area) along with all mounting & other accessories as per the tender specifications.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

"Conventional Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications."

Explosion Proof / Weather Proof Beacon (for hazardous area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308/ Equiv as per the tender specifications for indoor applications to be laid through conduits.

25 mm ISI marked metallic conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings as per specificaitons

GROUP-8: NEW SV & RT_KA_SERVICES

Supervison (of erection), testing & commissioning of RTUs at attended/ unmanned stations/block valves locations including termination of control cables, installation and commissiong of MCS/SCC systems, interfacing & integration of RTU with MCS/SCC machines and field instrumentation systems including supplied hardware/ software with station including development of control logics, OPC configuration for transfer of data with other machines, commissioning of UPS wherever applicable etc making all jobs complete as per drawings / specifications and acceptance of system by Owner. This include supply of all labour, consumables, tools, services rendered etc.

SV Locations

RT Locations with barrel

RT Locations without barrel

Fire and Gas Detection System Services

Installation, testing & commissioning of various types of detectors ,hooters, beacons, MCPs, isolators, response indicators etc., laying of signalling cables (through conduit/ clamping on wall etc), clamping / fixing of GI conduit in various building, pump shed etc for integration of detectors with Fire Alarm panel including all mounting accessories for support, junction boxes etc. as per theapproved scheme to complete the work in all respects inclusive ofsupply of all consumables,cost of all materials, labour, paintingservices, carriages etc. as per specifications, drawings, International Standard practices and the directions of Site Engineer/EIC. Job includesinstallation of all types of detectors, material etc

Multi Sensor Detectors & Isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Response Indicators

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Laying of unarmoured/armoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, response indicator, hooters, beacons, MCPs etc

Clamping / fixing of GI pipe on wall/roof/cable trench etc.

Testing & Commissioning of already installed Explosion Proof / Weather Proof Hooters/ beacon (for hazardous area)

Testing and commissioning of already installed Point type Hydrocarbon detectors

GROUP-8: NEW SV & RT_KA_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (KA State)

AMC for 2nd Year (KA State)

AMC for 3rd Year (KA State)

AMC for 4thYear (KA State)

AMC for 5th Year (KA State)

GROUP-9: APPLICATION SOFTWARE_TN_SUPPLY

Application (PAS) Server as per technical specifications

LDS operator workstations / terminals as per technical specifications

Pipeline Application Software (PAS) including MMI & one time license fee etc. complete as per the tender specifications

GROUP-9: APPLICATION SOFTWARE_TN_SERVICE

Installation, testing & commissioning of Application Server at Master Station with fine tuning & commissioning of Application software with necessary operating system software, pipeline application software for leak detection, pig tracking etc. including hardware /software complete as per tender specifications & configuration and acceptance of system by Owner. This includes all labour, consumables, tools, services rendered etc.

Training on supplied system (PAS)

GROUP-9: APPLICATION SOFTWARE_TN_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (TN State)

AMC for 2nd Year (TN State)

AMC for 3rd Year (TN State)

AMC for 4thYear (TN State)

AMC for 5th Year (TN State)

GROUP-9: APPLICATION SOFTWARE_KA_SUPPLY

Application (PAS) Server as per technical specifications

Pipeline Application Software (PAS) including MMI & one time license fee etc. complete as per the tender specifications

GROUP-9: APPLICATION SOFTWARE_KA_SERVICE

Installation, testing & commissioning of Application Server at Master Station with fine tuning & commissioning of Application software with necessary operating system software, pipeline application software for leak detection, pig tracking etc. including hardware /software complete as per tender specifications & configuration and acceptance of system by Owner. This includes all labour, consumables, tools, services rendered etc.

Training on supplied system (PAS)

GROUP-9: APPLICATION SOFTWARE_KA_AMC

COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT (AMC) FOR FIVE YEARS AS TERMS & CONDITIONS OF CONTRACT

AMC for 1st Year (KA State)

AMC for 2nd Year (KA State)

AMC for 3rd Year (KA State)

AMC for 4thYear (KA State)

AMC for 5th Year (KA State)

Bidder Name

Amount in Words

Yokogawa India Limited

ELECTRONICS CORPORATION OF INDIA LIMITED

ABB India Limited

ELECTRONICS CORPORATION OF INDIA LIMITED

Yokogawa India Limited