SPECIAL REPAIR TO BUILDING NO T74 T78 IN RANA SANGA ENCLAVE AND CERTAIN SANCTIONED WORK AT MIL STN KALUCHAK UNDER GE KALUCHAK

Amount

B/R Portion

Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Antitermite treatment to the back fill in contact with the foundation with chemical emulsion @ 7.5 litres/Sqm of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

Antitermite treatment to the top surface of filled earth with chemical emulsion @ 5 litres/Sqm of surface area complete all as specified and as directed.

Antitermite treatment to the soil alongwith external perimeter of building with chemical emulsion @ 2.25 litres/RM of perimeter wall complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

RCC 1:1.5:3 (normal mix), type A-1 (using 20 mm graded crushed stone aggregate) as in foundation including footing, foundation beam, plinth beam, base of column and mass concrete complete as required, complete all as specified and as directed.

RCC 1:1.5:3 (normal mix), type A-1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

RCC 1:1.5:3 (normal mix), type A-1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

RCC 1:1.5:3 (normal mix), type A-1 (using 20 mm graded crushed stone aggregate) as in floors or roofs slab, landings, balconies, in shelves and the likes upported on walls, beams, columns complete all as specified and as directed.

RCC 1:1.5:3 (normal mix), type A-1 (using 20 mm graded crushed stone aggregate) as in chajjaa and similar works and the likes upported on walls, beams, columns etc complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish flat surfaces of concrete, complete, all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work; finish flat surfaces of concrete, complete, all as specified and as directed.

Formwork to sides and soffits of floor or roof beam, lintel beam, and similar work; rough finish flat surfaces of concrete, complete, all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed.

Formwork to soffits of chajja, trough and similar work; (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed.

TMT bars 5mm dia and over upto and including 10mm dia, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90mm as in stirrups, spacers and binders, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, using water proofing compound, finished even and smooth with out using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound all as specified.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of floor, path, hardstanding etc complete all as specified and directed.

75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) in sub base of floor etc complete all as specified and directed.

50mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0 m in length and joint shall be made at every turning / corners, complete all as specified and directed.

40mm thick, plain cement concrete 1:2:4, type b-1 (using 20mm graded crushed stone aggregate) as in flooring etc., finishing surface even and smooth without using extra cement complete as specified and directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Non-skid coloured ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Non-skid coloured ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more diffrent colour tiles etc.) in vertical surfaces of size 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Precast chequered cement concrete tiles any colour, shape and size not less then 300mm x 300mm x 25mm thickness, M-25 grade pointed with grey cement and pigment over and including 15mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed.

15mm thick Udaipur green marble stone (table rubbed and polished) including half rounding exposed edges, in cooking plateform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc., all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down, easing and adjusting shutters of any description, not exceeding 1.00 Sqm each and re-fixing in the same opening completa all as specified and directed.

Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same opening completa all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 165mm x 60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 Nos of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 Nos of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge complete all as specified and directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of pressed steel door frames and in bed block for holdfast and similar works etc. complete all as specified and directed.

MS work as in hold fasts, bands, straps, wall ties, plain angle cleats and similar articles including welding complete all as specified and directed.

35mm thick 2nd class Hard wood factory made rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Steel windows or ventilator with side hung double shutters (window consisting of two shutters out side and two shutters of similar dimension inside made out of Z section) box type hinges with steel handle of 100mm and steel peg stay, complete with glazing bars, and dovetailed or welded complete all as specified and directed. Notes : 1. The inside shutters shall be suitable for fixing wire mesh and outside shutters for fixing glass panes. 2. The Wire mesh & glass panes shall be measured and paid separately. 3. The design and pattern of the shutter shall be provided as per direction of Engr in Charge. No extra payment shall be made in this regard. 4. Steel window with frame, double shutters, connected items as per description of item shall be measured and paid as one unit.

Steel windows or ventilator with side hung single shutters (window consisting of shutters of out side for glazing made out of Z section) box type hinges with steel handle of 100mm and steel peg stay, complete with glazing bars, and dovetailed or welded complete all as specified and directed. Notes : 1. The inside shutters shall be suitable for fixing wire mesh and outside shutters for fixing glass panes. 2. The Wire mesh & glass panes shall be measured and paid separately. 3. The design and pattern of the shutter shall be provided as per direction of Engr in Charge. No extra payment shall be made in this regard. 4. Steel window with frame, double shutters, connected items as per description of item shall be measured and paid as one unit.

Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe-410-O or Fe-310-O grade, including bending, cutting and welding as required, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening etc., complete as specified and directed.

Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Butt hinges, heavy weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Butt hinges, heavy weight, cold rolled mild steel, 75mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, fixed in repair complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 200mm long complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long, fixed in repair complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Aluminium handle cast type anodized of size 125mm complete all as specified and directed.

Aluminium handle cast type anodized of size 125mm, fixed in repair complete all as specified and directed.

140mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

300mm size Mild steel stove enamelled Helical door spring fixed to pressed steel frame / chowkhats including necessary welding work where-ever required complete all as specified and directed.

300mm size Mild steel stove enamelled Helical door spring fixed to pressed steel frame / chowkhats including necessary welding work where-ever required, fixed in repair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple complete all as specified and as directed.

Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple, fixed in repair complete all as specified and as directed.

Aluminium anodized frame (for door ) of size 101.60mm x 44.45mm made out of 1.60mm thick aluminium section, powder coated, fixed to floor / wall with plugs and screws complete all as specified and directed.

Aluminium anodised powder coated window/ventilator sliding shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No's in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed. Note : Sheet glass to be fitted will be measured and paid separately.

4mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of the concrete roof surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 15mm thick screed bed with cement mortar 1:4 over concrete surface. (b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kilogram/Square Metre. (f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.

Dismantling RCC /PVC water tanks exceeding 250 ltr capacity but not exceeding 500ltrs, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed.

Ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20mm bore dia of pipe (Minimum weight 210gms) fixed in repair complete all as specified and directed.

Stop Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repair complete all as specified.

Stop Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore and fixed in repair complete all as specified".

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25mm, complete all as specified and as directed.

Bib tap cast copper alloy, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

10 litres capacity PVC low level flush cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repairs, complete all as specified and directed.

Cast iron soil waste and vent pipes 100 mm bore (sand cast) in any length, with or without ears, with cement joint, fixed to walls, fixed in repair complete all as specified and directed.

Cast iron soil waste and vent pipes 75 mm bore (sand cast) in any length, with or without ears, with cement joint, fixed to walls, fixed in repair complete all as specified and directed.

Cast iron bends (any radius) 100mm bore, diminishing pieces or tapers (larger bore measured ) complete all as specified and directed.

Cast iron bends (any radius) 75mm bore, diminishing pieces or tapers (larger bore measured ) complete all as specified and directed.

Grating doom 125mm dia with waste hole of PTMT min weight 40gram complete all as directed.

PVC (SWR) floor trap 75mm dia with CP grating including jointing to waste fixed in PCC (1:2:4) type B-1 complete all as specified and directed.

Preparation of old ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

Preparation of new or previously untreated ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

Preparation of new plastered external surfaces of wall and applying two coats of cement base paint including one coat of cement primer completeall as specified and directed.

Complete removal of exisiting treatment and applying two coats of cement base paint on external surface of walls, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk witening primer complete all as specified and as directed.

Complete ermoval of existing treatment and preparation of old plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spots and two coats of oil emulsion distemper complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n.exc 0.1 sq.m each complete all as specified and as directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

E/M Portion

Taking out carefully copper/aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Taking down carefully unserviceable MCB DB's of any size complete fitting and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 110 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 110 here-in-before but for one 3 pin socket outlet 5 Amp on the same board, complete all as specified and as directed.

All as per the description of Serial Item No 110 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

All as per the description of Serial Item No 110 here-in-before but for one light point controlled by two, two way switches all as specified and directed.

All as per the description of Serial Item No 110 here-in-before but bell / buzzer point controlled by one push button on the same board with other switch on indipendent with cable all as specified and directed.

Switch piano flush type single pole, one way 5 Amp, complete all as specified and as directed.

Switch piano flush type single pole, two way 5 Amp, complete all as specified and as directed.

Bell push, flush type, 5 amp, complete all as specified and as directed.

Bell electronic 230 volt, AC single pole complete all as specified and as directed.

Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Socket outlet, 2 in 1, 2 and 3 pin 5 Amp, 240 volts, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings including Inverter LED lamp, 6500K, 900lm in white colour of 9 Watt base cap B-22 with poly carbonate diffuser and aluminium heat sink, complete all as specified and as directed.

Exhaust Fan, 250mm sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy efficient, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed. Make : Cat Part No. Brisk Air 10" of make : CG or equivalent model of Havells / Turbo Force / Khaitan / Usha.

Electronic fan regulator stepped type, two module with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan including taking out the unserviceable, complete all as specified and as directed.

Tube light fitting integrated type indoor decorative LED extruded aluminium batten in anodised finish with opal diffuser, IP-20 complete with housing and all accessories pre wired and making connections with three core copper flexible cable of size 23 / 0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Philips Cat Part No. BN021CLED20SPSUCWGRS2 or equivalent model from the list of makes specified here - in - after.

Ceiling Fan 1200mm sweep, five star energy saving BEE rating, and making connection with three core 23/0.0076 size twisted flexible copper conductor cable upto ceiling rose complete all as specified and directed. Make : Havells / Crompton / Usha

MCCB, Four Pole, 415 volt, rupturing capacity 25 KA, 125 Amp complete all as specified and as directed. Make : Legrand / L&T / Schneider.

Supply and Fixing sheet metal enclosure for MCB, DBs, phosphatised, powder coated, triple pole and neutral (TPN) 415 Volts, double door, 8 way IP-43 with din rail earth, 250A rated bus bar and neutral bar suitable for MCCB's as incomer and SP/TP MCB's as outgoings, cables shall be connected to a terminal by crimped lugs and have provision for fixing on wall and have earthing terminals complete all as specified and as directed by the Engineer-in-Charge.

VTPN distribution Board double door IP 43 protection with provision of MCCB as income and MCB as outgoing complete all as specified and as directed. Make : Legrand /ABB/ Schneider / Siemens / L&T.

MCB SPN 40 to 63 Amp, 240 volts 50Hz,10 KA AC supply, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA, complete all as specified and as directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way, complete all as specified and as directed.

Taking down Electronic meter from existing position and keeping in safe custody and refixing the same in different position /place of work complete all as specified and directed.

Making space by necessary cutting / grouting in wall under stair case for fixing of TPN DB in recessed position including necessary frame work with wooden door suitable for TPN DB with proper locking of wooden door over the DBs complete all as specified and directed.

Taking down existing ceiling fan and exhaust fan from existing position and keeping in safe custody and refixing the same after different position /place of work complete all as specified and directed.

Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit 25mm dia and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 4.0 Sqmm dia complete all as specified and directed. Note : Two run of 6.0 Sqmm wire, one run of 4.0 Sqmm wire and one run of PVC conduit shall be considered as one unit length.

Supply and fixing in replacement LED street light drivers for 60 watt fitting, complete all as specified & directed. Make : Crompton/ Bajaj/ Havells.

Supply and fixing in replacement LED street light drivers for 90 watt fitting, complete all as specified & directed. Make : Crompton/ Bajaj/ Havells.

Supply and fixing in replacement LED street light drivers for 150 watt flood light fitting, complete all as specified & directed. Make : Crompton/ Bajaj/ Havells.

Supply and fixing in replacement insulated copper conductor 3 core 1.5 sqmm for electric connection complete all as specified & directed.

Integral LED Security Light luminaire 90W LED 230 Volts new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium housing IP-66 roadway luminaire with high power LEDs as light source and electronic driver complete all as specified and as directed. Make : Crompton Greaves Cat Part No LSTP-90-CDL-M or equivalent model from list of makes specified here-in-after.

Supply, installation, testing and commissioning Water cooler, electric driven, single phase, 230 volts in situ PUF insulation, cfc free refrigerant, having energy efficient hermitically sealed reciprocating type compressor, having inbuilt RO & UV purifier, cooling capacity 60 Ltrs per hour and water storage capacity 80 litres all stainless steel body having two taps complete all as specified and as directed. Make : Bluestar Model No. SWCSDLX6080UVROE or equivalent model of Voltas / Usha.

Voltage stablizer for automatic boost / buck transformer copper wounded for low and high voltage correction complete of electronic transformer relay suitable for correction on single phase 50 Hz supply with voltmeter ampere meter input voltage 170 to 260 volts and output voltage stablized between 220 volt +/- 9% calibration accuracy +/- 03% of capacity 5 KVA, complete including low high cut off and intelligent time delay with digital display all as specified and as directed.

Voltage stablizer automatic boost / buck transformer copper wounded for low and high voltage correction complete of electronic transformer relay suitable for correction on single phase 50 Hz supply with voltmeter ampere meter input voltage 170 to 260 volts and output voltage stablized between 220 volt +/- 9% calibration accuracy +/- 03% of capacity 3 KVA, complete including low high cut off and intelligent time delay with digital display all as specified and as directed.

Supply, installation, commissioning and testing of Refrigerator, electric driven, single phase, 311 litre capacity, frost free, Three Star BEE Rating, complete all as specified and as directed. Make : Godrej Model No RFGF3114PTHLSTLYRN or equivalent in Samsung / LG.

Supply, installation, commissioning and testing of Refrigerator, electric driven, single phase, 235 litre capacity, frost free, Three Star BEE Rating with inbuilt voltage stabilizer, complete all as specified and as directed. Make : LG Model No GL-D241APGY or equivalent in Samsung / Godrej.

Supply, installation, testing and commissioning hard top deep freezer double door eletric operated 230 Volts, 50 Hz single phase, gross capacity 500 litres, temperature range -24 degree C to +8 degree C, refrigerant R290, inner cabinet made of PP liner, PUF thickness 60mm complete all as specified and as directed. Make : Blue Star model No. : CHF500HGW or equivalent model of LG / Godrej.

Voltage stablizer automatic boost / buck transformer copper wounded for low and high voltage correction complete of electronic transformer relay suitable for correction on single phase 50 Hz supply with voltmeter ampere meter input voltage 170 to 260 volts and output voltage stablized between 220 volt +/- 9% calibration accuracy +/- 03% of capacity 1 KVA, complete including low high cut off and intelligent time delay with digital display all as specified and as directed..

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10 Amps complete all as specified and as directed.

Supply, installation, testing, commissioning of hi wall air cooled inverter split air conditioner (5 Star Rating) electric driven single phase, indoor / outdoor complete with cordless remote control unit with cooling function of capacity of 1.5 Ton complete all as specified and as directed. Make : Voltas Model No. SZS-Floral (R32), Bluestar P-Series Model No. BS-SCNHW18PAFU.

Supply, installation, commissioning and testing of servo controlled Voltage Stabiliser fully automatic operation, unbalanced type (individual phase control), copper wound 415 V, 50 Hz confirming to BIS 9815 : Part 1 : 1994 reaffirmed 2009, IP-45, three phase naturally oil cooled, indoor type & designed for input variation between 340 volts to 480 volts with output voltage stabilised at 415 volt with accuracy ± 1.0% and speed of correction 8 volts per second of capacity 30 KVA including first filling of transformer oil having dielectric strength not less than 30 KV as per IS:335, 0-500 volts voltmeter, arrangment to check input voltage and output voltage, RYB indication lamp, high & low voltage cut off system, single phase preventor, time delay relay, servo byepass switch, overload & short circuit trip system, ammeter etc., complete all as specified & directed.

Supply, installation, testing & commissioning of submersible pump set, multistage (as per mfg design stage) electric driven of capacity not less than 400 LPM, 79 mtr head, water lubricated suitable for 200mm bore & 100mm bore discharge pipe coupled with squirrel cage induction electric motor, 3 phase, 415 volts of capacity not less than 12.50 HP having CI casing & gun metal impeller fitted with delivery pipe etc as required at site, complete all as specified & directed. Make of Pump and Motar : Kirloskar/ Crompton/ KSB.

Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for electric poles / stay foundation and under ground electric power cables, CI /GI pipes etc and getting out, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed.

Removing excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. Make : Havells / KEI / Polycab

Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm, all as specified and as directed.

Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete, all as specified and as directed. Note : The punned thickness 18cm shall be considered for measurement purpose.

Steel pipe galvanised light grade 40 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed. Make : Jindal / Tata / Prakash Surya

Steel water tubing medium grade galvanised with all fittings fixed to walls for connection to water cooler complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Stop valve cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

Anand Prakash

M/S MANJIT SINGH AND SONS

M/S PARAMJEET SINGH

M/S ARUN ANAND

Bidder Name

M/S ARUN ANAND

M/S PARAMJEET SINGH

Anand Prakash

M/S MANJIT SINGH AND SONS

NARESH KUMAR AND COMPANY