146 H(F)(W)/2022-23

Amount

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole 11 Mtr. long

11 KV HT XLPE Cable 3x185 sqmm

11 KV Cable Jointing Kit Outdoor 3x185 sqmm

11 KV Cable Jointing Kit Indoor 3x185 sqmm

LT Alu. Cable XLPE 3.5x240 sqmm

LT Alu. Cable XLPE 3.5x400 sqmm

LT PVC All Cable XLPE 3.5x150sqmm

33 KV Lightening Arrester

A Pannel

B Pannel

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Construction of Plinth of Transformer Size 2x2x1.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

ERP Fencing of Transformer Plinth With Installation (all the material will be supplied by the contractor.)

Laying of underground 11 KV 3x185 sq mm XLPE Cable D/C in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Supply and Laying of G.I. Pipe 6'' dia

Installation and Fixing of 33 KV Lighting Arrestor

Installation and Fixing of A Pannel

Installation and Fixing of B Pannel

M/s S.K. Construction

ALOK KUMAR SINGH