(Re-Tender) Chajja Work under Construction of Plug & Play Pre-Engineered Multistory Building at Industrial Area, Begusarai, Phase- 1 to 5 (Ext.)

INFRASTURUCTURE DEVELOPMENT AUTHORITY First Floor, Udyog Bhawan, East of Gandhi Maidan, Patna

TECHNICAL BID SHEET

TENDER NUMBER 26/TEN/IDA/26 DATE OF ISSUE OF TENDER 07.09.2026

NAME OF WORK (Re-Tender) Construction of Plug & Play Pre-Engineered Multistory Building at Industrial Area, Begusarai, Phase- 1 to 5 (Ext.) के अंतर्गत छज्जा निर्माण कार्य। COST OF WORK AS PER BOQ Rs. 24,929,684.00

BID SECURITY (EARNEST MONEY DEPOSIT) AMOUNT Rs. 499,000.00 COMPLETION PERIOD IN MONTHS 6.0

NAME OF TENDERER ALL COLOURED CELL IS TO BE FILLED ACCORDINGLY

ADDRESS, E-MAIL & MOBILE NUMBER OF TENDERER

S.N. ITEMS REQUIREMENT REMARKS

1 REGISTRATION (Any Contractor Registered in appropriate category with Central Government / Any State Government / Any Public Sector Undertakings or an Agency of National or International repute may tender but Registration with Infrastructure Development Authority will be essential after issue of Letter Of Acceptance.) Department

Registration No.

Date of Validity

2 LEGAL STATUS OF BIDDER Section 1 ITB 4.3 (a) of S.B.D (i) Individual/Partnership/Pvt. Ltd./Public Ltd/Joint Venture

(ii) Place of Registration.

(iii) Principal Place of Business

(iv) Power of Attorney of Signatory Bid

3 PERMANENT ACCOUNT NUMBER (PAN) Attach Copy of PAN

4 GST REGISTRATION Attach Copy of GST

5 COST OF BOQ (e payment only) Rs. 11,800.00 (Attach e-payment receipt of BOQ)

6 EARNEST MONEY DEPOSIT (BID SECURITY) Earnest Money Deposit (Bid Security) will be accepted only in online mode (Internet Payment Gateway). No other forms of Earnest Money Deposit (Bid Security) will be accepted. Amount To Be Entered (Rs. In Lakhs) Attach e-payment of Earnest Money Deposit (Bid Security).

7 WORK EXPERIENCE OF SIMILAR NATURE (Structural Steel work) Section 1 ITB 4.5 (A) (b) of SBD The completion certificate shall be issued by employer not below the rank of Executive Engineer or Equivalent.

8 QUANTITY WISE EXPERIENCE Section 1 ITB 4.5 (A) ( c ) of SBD MINIMUM QUANTITY / AMOUNT AS PRESCRIBED IN SBD

Structural Steel Work : 53,363.80 Kg

9 ANNUAL FINANCIAL TURN OVER OF LAST FIVE YEARS ITB Clause 4.5 (A)(a) (Balance Sheet, Profit & Loss And Audit Report Duly Audited By CA) FY 2021-2022 Amount To be entered (Rs in Lakhs)

FY 2022-2023 Amount To be entered (Rs in Lakhs)

FY 2023-2024 Amount To be entered (Rs in Lakhs)

FY 2024-2025 Amount To be entered (Rs in Lakhs)

FY 2025-2026 Amount To be entered (Rs in Lakhs)

10 BANKER'S CERTIFICATE EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES (10% OF PROJECT COST) Section 1 ITB 4.2 ( i ) of S.B.D Certificate Issued By Bank As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender

11 BIDDING CAPACITY (BC=A*N*3-B) Section 1 ITB 4.7 of S.B.D A =Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N =Number of years prescribed for completion of the works for which bids are invited. B =Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next 06Months (period of completion of the works for which bids are invited).

12 (A) AMOUNT OF EXISTING COMMITMENTS AND ONGOING WORKS Attach As Per Sec. 2- 1.4 (A) Of SBD, On Or After Date Of Tender (Bidder must decleare themselve their all exising commitment concealment of any fact shall be sufficient cause for rejection)

(B) AMOUNT OF WORK FOR WHICH BID ALREADY SUBMITTED Attach As Per Sec 2- 1.4 (B) Of SBD, On Or After Date Of Tender

13 AFFIDAVIT (I) Attach An Affidavit As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

(II) Attach An Affidavit As Per NIT, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

14 CHARACTER CERTIFICATE Attach a Valid Character Certificate of Tenderer Issued By Competent Authority.

15 UNDERTAKING (i) Investment of minimum cash up to 25% of the value of the work during implementation of the contract. Section 1 ITB 4.2 (ii) of SBD (I) Attach An Undertaking As Per Format Prescribed In Sec. 2 Of SBD.

(ii) Bid Validity : 120 days Section 1 ITB 15.1 of SBD (II) Attach An Undertaking As Per Format Prescribed In Sec. 8 Of SBD.

16 LITIGATION HISTORY Section 1 ITB 4.3 ( j ) of SBD As Per Format Prescribed In Sec. 2-1.11 Of SBD On Or After Date Of Tender.

17 PROPOSED METHODOLOGY AND PROGRAMME OF CONSTRUCTION Section 1 ITB 4.3 ( l ) of S.B.D Attach Descriptions,Drawings And Charts As Necessary.

18 TECHNICAL PERSONNEL Section 1 ITB Clause 4.5 B (b) Attach As Per Sec-2-1.6 Of SBD. Attach Necessary Certificate And Current Affidavit Of Both Employee And Employer On And After Date Of Tender, Duly Attested By An Executive Magistrate.

19 LIST OF KEY PLANTS & EQUIPMENTS Section 1 ITB 4.5 B (a) Attach As Per Sec 2-1.5 Of SBD (Max. Age 5 Years). Attach Owned Voucher/Cash Memo/Invoice And Affidavit In Case Of Leased/Hire On And After Date Of Tender, Duly Attested By An Executive Magistrate.

I, the undersigned, do hereby certify that all the statements made in the required attachements are true and correct.

INFRASTRUCTURE DEVELOPMENT AUTHORITY

(A GOVERNMENT OF BIHAR UNDERTAKING)

(Re-Tender) Construction of Plug & Play Pre-Engineered Multistory Building at Industrial Area, Begusarai, Phase- 1 to 5 (Ext.) के अंतर्गत छज्जा निर्माण कार्य।

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Whatsapp Enabled Mobile Number

NIT - 26/TEN/IDA/26

Sl no. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 24,929,684.00

TOTAL AMOUNT Rs. 24,929,684.00

(Re-Tender) Construction of Plug & Play Pre-Engineered Multistory Building at Industrial Area, Begusarai, Phase- 1 to 5 (Ext.) के अंतर्गत छज्जा निर्माण कार्य।

S.No. Particular Amount

1 Schedule Items 24,929,684.00

(Re-Tender) Construction of Plug & Play Pre-Engineered Multistory Building at Industrial Area, Begusarai, Phase- 1 to 5 (Ext.) के अंतर्गत छज्जा निर्माण कार्य।

SCHEDULED ITEMS

SI.No. BCD SOR-22 DESCRIPTION OF ITEMS Unit Rate Quantity Amount

Civil Work (Schedule Items)

SECTION- 1 : CIVIL WORK

1 10.16 Steel work in built up tubular( round, square or rectangular hollow tubes etc.) trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, including welding and bolted with special shaped washers etc. complete:

10.16.2 Hot finished seamless type tubes Kg 137.90 106727.60 14,717,736.00

2 12.50 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 625.10 5220.00 3,263,022.00

3 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

12.51.2 Flashing/Aprons. (Upto 600 mm) mtr 377.90 4350.00 1,643,865.00

4 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

13.82.1 New steel work (two or more coats) Sqm 83.50 5220.00 435,870.00

21.19 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

21.19.3 Up to 20 mm depth and 20 mm width mtr 283.00 8700.00 2,462,100.00

6 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. mtr 47.10 8700.00 409,770.00

7 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

TOTAL WORK AMOUNT (RS.) = 23,661,431.00

Total Amount (Rs.) 24,929,683.70