Dindigul Ayyampalayam TP 15th Finance Commission Tied 2023-24 supply and delivery of 2 HP and 5HP Standby- Submersible Motor and Providing Mini Power Pump in the Existing Bore well at Ward No.5,6,7 and 8 in Ayyampalayam Town Panchayat

Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales,murram, ordinary earth, earth mixed with 50% fair sized boulders etc., with initial lead and lifts including laying, sprading, levelling sectioning breaking clods etc., incuding all incidential changes complete as per standard specification for foundation SS 20B

Plain cement concrete Using 1:4:8 mix ( One Part of cement , four Parts of Fine aggregates and Eight Parts of Coarse aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,Finishing and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Brick Work in Cement Mortor 1:5 Mix (one Part of cement and Five Parts of Fine aggregates) Uing new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site and labour charges for mixing, laying ,Finishing and curing etc. complete. Complying with std. specifications.

Plastering with CM 1:5 (One part of cement & five parts of Fine aggregates) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications – TNBP No:56&57

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete

Supply and fixing of cuddapah stone slab of 20/30mm thicknees forpanel board arrangement including polishing etc., complete and as directed by departmental officers

Supply and delivery of Submersible pumpset with motor confirm to IS 8034/2002 with isi making as per standard specification for deep borewell or the duty condition of (SINGLE PHASE 150M H x 20 lpm) provided the pump set should supplied with the 1m of flat submersible cable the pump set should be delivered at site including packing, transport extra complete. (Page No.104)

Supply and delivery of Openwell Submersible pumpset conforming to IS 14220/2002 and as amended there afterand BEE 3Star Rated capable of dis charging the following duties due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller,CIFG 200grade casin gand brass screw sand rotor shall be of copper rod as per IS613/1984 with ISImark.The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. Thenon-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction.The pump should be directly coupled to 2880RPM, three phase,50Hz(±5),415V+6 % & 415V-15% squirrel cage induction motor suitable for DOL upto 5HP,Fully Automatic Airbreak Star Delta upto 20HP and AutoTransformer starter for above 20 HP starting and for continuous operation. (50X 125)

Supply and delivery of Pvc &GI specials including cost for materials and all labour charges for completed . Pannel board upto 5.00 H.P.

Pannel board upto 2.00 H.P.

2.5 Sqmm Submersible Cable

32mm G.I. Union

Bore cover

Bore Clamp

32mm G.I. Elbow

32mm Dia G.I.Pipe

32 mm G.M Non return Valve

32 mmG.M Gate Valve

1000 Lit HDPE Tank ISI / ISO

20mm G.I.Coupling

20mm Waste not Tap

4 Sqmm Submersible Cable

Labour charges for the Erection of submersible pumpset in borewell/open well including fixing and jointing submesible cable with proper clamps upto the starter to requied depth and also fixing of riser pipes to the requird depth valves erection clamps etc, complete.

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc complying with standard specification

Supplying and fixing of 16Amps DP Switch with Metal Glad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box (SD No.142)

supply and fixing of TNEB meter board suitable for 32 A Three phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1"X18" copper flat) on TW plant of size 600mm X 450mm X19 with supporiting TW reepers of 1 " thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.127)

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD No.69)

A RAMALINGAM CONTRACTOR (BID ID -1006776)