ELECTRIC WORK

Amount

fo|qr forj.k [k.M&[kqtkZ ds vUrxZr fofHkUu 33@11dsoh fo|qr midsUnzksa ds okf"kZd izkDdyukuqlkj le;&le; ij fo|qr O;o/kku@czsd Mkmu ,oa vkikrdkyhu fLFkfr esa fo|qr Hk.Mkj dsUnz ls lkexzh <qykbZ dj lacaf/kr LFky ij igqapkdj U;wure vof/k esa fo|qr vkiwfrZ lqpk: djus dk dk;ZA

Carriage of fallowings from ESC. BSR to JE Store on kachcha pacaa road including loading and unloading chagres at both ends, requried for proper completion of work, distance about to 40Kms.

S.T Pole/Pcc Pole.

Carriage of Fresh Oil/Drum.

Carriage of XLPE Cable.

Carriage of All line Material from store to je store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of D/P support including complete HT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8-30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc, as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of

Grouting of D/P support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8-30x3030 cms, including the cost of cement, sand, birck ballast/stone ballast, etc, as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of

Carriage of All line Material from JE store to pit site as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc

Laying, sagging. Stringing and binding and jumpering of ACSR Weasel conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Laying, sagging. XLPE Cable, as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc, requried for proper completion of work.

fixing of Stay rod with Stay wire in proper way with Nozelling.

Grouting of Stay rods

Resagging of loose and bad sag of LT./H.T. line.

Chopping of Tree Branches.

Tightening of Stay

Grouting of PCC/STP Pole Old

Change of broken/Damaged/Missing following items:

Disc Insulator

Pin Insulator

Nut & Bolt off size

Bended X-Arm/Angle/Channel

Ailment of PCC/STP Pole

L.T/F/Holding Clamps

Stay Clamps

Stay Insulator

Making of Plinth of the Damaged/Broken STP of the welded 03 Nos. Angle Iron piece with the Pole.

The folloing material is required to be supplied by the contractor.

Stay insulator.

Stay clamp.

Holding clamp.

L.T Clamps.

L.T Insulator.

F Clamps.

Bolt & nut off size.

Vivek Electricals (BID ID -5159313)

M/S YASHI ENTERPRISES (BID ID -5156961)