REPAIR REPLACEMENT TO CI DI MS GI PIPE LINE AND CONNECTED MIS REPAIRS LIKE CLEANING OHT AND UG SUMPS ETC UNDER AGE EM II IN GE C KIRKEE

Amount

M & L for Cleaning of RCC underground/semi underground watersupply sump, static water tank of capacity 30000GLNS to 50000GLNS by dewatering and taking out all scales,dirts, mud, algae etc from inside the tank and from mouth of circulating pipes includin and taking out sludge with help of diesel driven sludge pump of suitable capacity including washing of tank wall with and icluding bleaching powder solution and then with water and draining out sludge, water completely all as specified and as directd by Engineer in Charge.

All as per item No1.00 above but capacity 50,000 GLNS to 1,00,000 GLNS

All as per item No 1.00 above but capacity 1,50,000 GLNS to 2,00,000 GLNS

All as per item No 1.00 above but capacity 2,50,000 GLNS to 4,00,000 GLNS

Note for item No 1 to 4 : (i) Cleaning should be done by scraper and removing dirt with brush and washing with bleaching powder all as directed by Engr-in-Charge. (ii) The inlet and outlet / over flow pipe of sump should be cleaned properly and care should be taken to prevent entry of sludge into pipe line by blocking mouth of pipe. Any blockage of the inlet / outlet / overflow pipe line shall be cleaned by contractor at no extra cost. (iii) Date of cleaning 'CLEANED ON ___________ NEXT due DATE ______________' should be painted with black and white paint as per Existing size. (iv) Tank / Sump capaciting 'CAPACITY ________ GLNS' should be painted on tank as per existing size. (v) Rate quoted by the contractor are deemed to be inclusive of bleaching powder, paint and other t&p required for the job.

M&L for Ductile Iron Pipes 350mm bore, class K-7 spigot and socket end suitable for and including push on rubber gasket joints & jointing material and pipe fittings as per site requirement incl taking down old pipe all as specified and directed at site by Engr-in-Charge.

All as per item ser No 5.00 above but of size 300mm bore

All as per item ser No 5.00 above but of size 200mm bore

Supply and laying of Mild Steel pipes heavy grade with all fitting laid in floors or fixed to walls etc of size 150mm bore incl all necessary nut,bolts,washer,rubber packing etc complete all as spcified and directed by Engineer in Charge.

Supply and laying of Cast iron pipes with spigot and socket ends centrifugally cast, class B , in any trenches of size 300mm bore incl run lead joint complete all as specified and directed by Engineer in Charge.

Supply and laying of Cast iron pipes flanged ends centrifugally cast, class B , in any trenches/ wall / pcc piller of size 350mm bore incl all nut,bolts,washer,rubber packing etc complete all as spcified and directed by Engineer in Charge.

M & L for Excavation in trenches not exceding 1.5 m wide not exceding 1.5 m in depth and getting out Hard/dense soil complete all as spcified and directed by Engineer in Charge.

M & L for Returning filling in, including spreading, leveling watering well ramming in layer n.exc 1.5 cm thick in soft/loose soil complete all as spcified and directed by Engineer in Charge.

M & L for Removal of excavating material n.exc 50m & deposited where directed and n.exc 1.5m above the starting point complete all as spcified and directed by Engineer in Charge.

Supply and laying tubes medium grade galvanised iron in trenches/wall /floor with all fittings such as tees, bends, unions, elbow, reducers, clamps, etc of size 50mm bore complete all as spcified and directed by Engineer in Charge.

All as per item ser No- 14.00 above but of size 40mm bore.

All as per item ser No- 14.00 above but of size 25mm bore.

All as per item ser No-14.00 above but of size 20mm bore.

All as per item ser No-14.00 above but of size 15mm bore.

S & F in repair gun metal stop/gate valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed for size 50mm dia complete all as specified and as directed by Engineer in charge.

All as per item ser No-19.00 above but of size 40mm bore.

All as per item ser No-19.00 above but of size 25mm bore.

All as per item ser No-19.00 above but of size 20mm bore.

All as per item ser No-19.00 above but of size 15mm bore.

S&F in repair Cast iron Non return sluice valve suitable for 150 mm bore pipe with bypass arrengement Double flanged swing type as per IS-5312 (Part I) of pressure rating PN 1.6, incl of gasket , nutbolts and washer etc complete all as specified and directed by Engineer in Charge.

S&F in repair Cast Iron Sluice Valve of size 300mm dia with flanged ends drilled of class PN 1.6 with SS spindle complete with rubber gasket 6mm thick ,nuts bolts and washers etc complete all as specified and as directed by Engineer in charge.

S&F in repair Cast Iron Sluice Valve of size 200mm dia with flanged ends drilled of class PN 1.6 with SS spindle complete with rubber gasket 6mm thick ,nuts bolts and washers etc complete all as specified and as directed by Engineer in charge.

S&F in repair Cast Iron Sluice Valve of size 150mm dia with flanged ends drilled of class PN 1.6 with SS spindle complete with rubber gasket 6mm thick ,nuts bolts and washers etc complete all as specfied and as directed by Engineer in charge.

S&F in repair cast iron foot valve of size 200 mm dia with flanged end including rubber gaskits , nut bolts,and washers etc complete all as specified and as directed by Engineer in charge.

S&F in repair cast iron foot valve of size 150 mm dia with flanged end including rubber gaskits , nut bolts,and washers etc complete all as specified and as directed by Engineer in charge.

S&F in repair cast iron air valve of size 50 to 100 mm dia with flanged end including rubber gaskits , nut bolts,and washers etc complete all as specified and as directed by Engineer in charge.

M & L for Dismantling/Cutting/Removing the damaged CI pipe of size 100 to 350mm for fixing mechanical joint and making good the work space complete all as directed. Note :- (i) The cost of pipe cutter and Tools & Plant required for work is deemed to be included in the rate quoted by contractor. (ii) New mechanical joint will be measured and paid separately under relevent items of BOQ.

M&L for replacement of Mechanical joint coller coupling long sleeve with rubber washer, mild steel screw bolts (machine made) with both ends screwed of dia as per flange hole and required length each screwed end to be fitted with washers and hexagonal nut suitable for 100mm CI/DI/MS pipe complete all as directed.

All as per item No 32.00 above but of size 150mm bore

All as per item No 32.00 above but of size 200mm bore

All as per item No 32.00 above but of size 250mm bore

All as per item No 32.00 above but of size 300mm bore

M & L for rectification of leakage of UG water pipe lines of size 250 to 350 mm Bore pipe of any description such as CI/DI/GI pipe line at any location under AGE E/M-II including necessary excavation, earth work, dewatering, including repairs with suitable flanges, rubber packing,lead wool or any other packing material complete all as specified and as directed by Engineer in charge.

All as per Item No 37.00 above but of size 100 to 200mm bore

All as per Item No 37.00 above but of size 50 to 80mm bore GI Pipe

Note for item No.37.00 to 39.00 :- i) Complaint will be notified to contractor by call/text and it shall be rectified within 24 hours after notification, failing which Rs 500/- per day per complaint will be recovered ii) Misc items required for complete the job are deemed to be inclusive of the rate quoted by contractor. iii) GI fittings like elbow, tee, socket etc required for the work shall be measured and paid separately under relevant item of BOQ.

Supply only GI Elbow threaded, ISI marked of size 80mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Elbow threaded, ISI marked of size 100mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Tee threaded, ISI marked of size 80mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Tee threaded, ISI marked of size 100mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Socket threaded, ISI marked of size 80mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Socket threaded, ISI marked of size 100mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Union Socket threaded, ISI marked of size 80mm dia complete all as specified and as directed by Engineer in charge.

Supply only GI Union Socket threaded, ISI marked of size 100mm dia complete all as specified and as directed by Engineer in charge.

Dismantling existing control & power wiring of LT starter Panel of pump motor capcity 15 HP to 75 HP & rewiring with PVC insulated copper wire existing size of control & power wiring for proper sequential working of contactors with delay timer, over load relay of water pumps, cooling tower motor, mccb etc. by making proper connections to contactors, relays, fuses, switches, voltmeter,ammeter incl Repair/ replacement of damaged hinges of each compartment of panel, taking down existing bus bars and cleaning with CTC applying with becktol red solution, providing bus bar insulation and refixing with new nuts, bolts, washers etc testing commissioning complete as directed . Note:- (i) Cost of electric cable, lugs & connectors is deemed to be inclusive in rate quoted by the contractor. (ii) The quoted rate include the cost of painting of the panel with two coats of synthetic enamel paint complete all as up to satisfection of Engr-in-charge. (iii) Cost of replacement of MCCB's, Contractors ,relays is not included in the scope of work.

M & L for PVC insulated cable with copper conductor 1100V of size 50 sqmm single core complete with copper thimbling and providing cable connections including flexible conduit where is required complete all as specified and as directed by Engineer in charge.

M & L for Construction of masonry valve chamber of 1500MM x 1200mm x 1500mm size ,100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15MM thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50M complete all as specified and as directed by Engineer in charge.

S&F cast iron specials, bends and type, reducer and angle tapers, any stright bends double socket etc , Tee pipes single branch all socketed and spigot CI upto 350mm dia including dismantling of old one complete all as specified and as directed by Engineer in charge.

Material and Labour for Mild Steel brackets, frames ,supports channel and stands of type as required made out of angle iron, channel, flat or strip of grade Fe-410-S of any size as per site requirement etc complete with painting two coat with synthetic enemel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge .

M & L for cement Concrete work in foundation, filling, mass concrete by using 40 mm graded aggregate type B2 of ratio 1;2;4 for fixing MS channels for support CI/MS water pipes at any sloping area all as directed by Engr-in- Charge. Note - Any excavation/returning and filling/removal work of soil is to be measured and paid under relevant items.

M/S - ASHOK ELECTRICALS

M/S. OM ENTERPRISES

JP ENTERPRISES

Mukta Enterprises