CLEANING/ REPAIR/ RENEWAL OF SEWAGE LINES, SEPTIC TANKS MANHOLES ETC CLEANING OF SERVICE TANKS, REPAIRS TO PERIMETER WALL AND COMPOUND WALL, DWARF WALL OF CHAINLINK FENCING AND REPAIR TO AREA DRAIN, PATHWAY, HARD STANDING OTHER MISC WORKS OF (POCKET

Amount

Excavation in trenches n exc 1.5 deep and n exc 1.5m wide in soft/ disintegrated rock for foundations etc and getting out

Returning filling in incl spreading, levelling watering and well ramming in layers nexc 25cm in soft/disintegrated rock

Removing excavated material exc 250m and nexc 500m and depositing where directed in soft disintegrated rocks

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as directed by Engineer-in-charge

Demolition and breaking up of 100mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar

Demolition and breaking up of 75mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar

Demolition and breaking up of 160mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar

M&L for concrete bed to drain pipe of 160mm dia incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete type C2 (1:3:6)

S&F PVC (SWR) pipes 160 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints,fixed to walls

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints,fixed to walls

S& F PVC (SWR) bends any radius 110 mm bore with access door

S& F PVC (SWR) bends any radius 75 mm bore with access door

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of dia 110mm with access door

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of dia 75mm with access door

S&F PVC (SWR) branch piece, double (double Y) equal or unequal of dia 110mm with access door

S&F PVC (SWR) branch piece, double (double Y) equal or unequal of dia 75mm with access door

Demolition of brick work or stone / boulder / PCC block masonry built in cement mortar

M&L precast cement concrete block masonry type C1 1:3:6 using 20 mm graded stone aggregate with soild blocks exc 10cm in width and set in cement mortar 1:6 complete

Taking down cement plaster of stone / PCC block / brick wall / top of chajja or concrete surface of any description including racking out joints hacking for key securing down with water etc and removal of debris to out side of INS Mandovi area including filling of open joints in cement mortar 1:6 complete

M&L, rendering 10 mm thick in cement mortar 1:6 on brick masonry surface finished even and smooth without using extra cement .

M&L for providing cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate in, copings, benching to manholes, water troughs and like including weathering slightly rounded or chamfered angles and throating, and including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for pre cast cement concrete (1:2:4) Type B1, using 20mm graded crushed stone aggregates in cover slabs, set in cement mortar 1:4 with plain faces, complete all as specified and directed by Engineer-in-Charge. Note: - Reinforcement steel shall be measured and paid separately under appropriate item of Schedule 'A'. .

S&F mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. .

Taking out liquid/solid content from sump/septic tank/filter bed/soakage well and sewage lines by Sewage Sucker Tanker & cleaning thoroughly including disposal of liquid/solid content out of the Defence Land complete all as specified and directed.

Material and labour for keeping fully/smooth functional the sewage lines including manholes manually once made functional the similar state & free from any sort of blockages in sewage line, septic tank, sump and manholes for the period of one calendar month complete all as specified and all as directed by Engineer-in-Charge.

Note: (i) Period of maintaining the sewage line under INS Mandovi area shall be commenced after the physically date of completion of work as certified by GE (P) Navy Mandovi. A register of complaints shall be maintained by the contractor and will be produced to the GE (P) Navy Mandovi duly signed by the Engineer-in-charge at the time of claiming the payment. Two workers of the contractor reports daily to sub divn in-charge for taking complaints from the users through MES. In case of any break down due to negligence of the contractor he will have to make the sewage line functional without any extra cost to the Govt. If the contractor fails to clear the lines within a reasonable time a sum of Rs 500/- per complaint shall be recovered from the contractor’s dues.(ii) The entire work shall be carried out in the areas under the jurisdiction of GE (P) Navy Mandovi(iii) Rate quoted above shall be deemed to included in the cost of adequate T&P, equipment, safety devices etc along with sufficient labourers to fullfill the requirement to the entire satisfaction of Engineer-in-Charge. Any dispute related to above shall be resolved by Garrison Engineer and his decision shall be final, conclusive and binding.

Material and labour for cleaning of RCC /AC/PVC water tank (staged over the bldg ) by removing float valve carefully, draining out water , scrapped down by wire brush for removing fungus, mud scales and washing down with fresh water and refixing float valve in same position and applying one coat white / colour washing on external surface and spreading bleaching powder inside water tank as directed Engineer in charge for capacity not exceeding 500 ltrs.

All as per serial item No 29 here in before but capacity exceeding 500 litre.

All as per serial item No 29 here in before but capacity exceeding 1000 litre.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165

M&L providing cement concrete type B2, 1:2:4 (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), including necessary form work.

Dismantling of fencing wire mesh , any type complete all as specified.

Dismantling of RCC/steel post or struts embedded in concrete/ brick work/ masonry etc. including taking out embedded portion and making good disturbed ground

S&F for mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F for mild steel screw bolts ( machine made ) with hexagonal or square head at one end and screwed the other , or screwed both end , each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 5cm but n exc 10cm long. Diameter of shank will be 10 mm.

M&L for TMT bars 8 mm and over cut to length bent to shape required including cranking and binding with MS wire n less than 0.9mm dia but for stiffener of chain link fencing.

Supply only chain link fencing with 3mm dia, galvanished steel wire and size of mesh 75mmx 75mm all as specified/directed weight exc 2.0 kg per sqm and nexc 2.50 kg per sqm

Supply only PVC Coated chain link fencing with 3mm dia, galvanished steel wire and size of mesh 75mmx 75mm all as specified/directed weight exc 2.0 kg per sqm and n.exc 2.50 kg per sqm

Fixing only chain link fencing including line wires, mesh, size and type to any of strands, rails, straining bolts, etc. including provision of binding wire

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface with liquid WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed (Note - liquid WPC shall not be measured and paid separately)

Supply only Integral waterproofing compound

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surface incl preparation of surfaces

M&L for applying one coat of acrylic emulsion exterior paint (Anti fungal paint-APEX) on old decorative surface of wall, ceiling cornices including preperation of surfaces by brooming scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc and making surface smooth by applying ready mix putty where required over a coat of primer.

M&L for applying two coats of acrylic emulsion exterior paint (Anti fungal paint-APEX) on old decorative surface of wall, ceiling cornices including preperation of surfaces by brooming scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc and making surface smooth by applying ready mix putty where required over a coat of primer.

M&L for preparation of new or previously untreated steel surfaces & apply two coat of anti corrosive paint over one coat of Red oxide primer . Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

M&L for preparation of new or previously untreated steel surfaces & apply two coat of anti corrosive paint over one coat of Red oxide primer . Surfaces of any description, over 10 Cm in width or grith, not other wise description

M&L for welding in repairs n. exc. 2.5 cm in length ( thickness of meta exc. 6mm but n. exc 9mm )

S&F for galvanised, 2 strand, steel barbed wire 2.24MM dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), fixed in repairs.

M&L for 610 mm concertina coil fencing with GING coating and 9 line RBT + 125 to 127 clips per coil + 50 circles of wire in 1 coil + coil coverage of 6-8 RM + Wt of coil Appx 8.5 Kg per coil including GI wire, GI J clip, GI pin, hand gloves etc and special nut and bolts to hold two coils together and extra rows parallel wire of 10gauge complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling plain or corrugated steel sheeting

M&L for 100 mm cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in levelling/sub base concrete complete all as specified.

M&L for 100 mm cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor complete all as specified.

M&L for cement concrete 75mm thick cement concrete type C-2 ,1:3:6 (40mm graded aggregate ) as in plinth protection finished even and smooth without using extra cement

M&L Sand filling under floors or in foundations including watering and consolidation

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (Rubber Moulded)

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage and applying two coat of synthetic paint over a coat of primer complete all as specified.

M&L for screed Bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (over plinth protection) with grey cement and no pigments

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including gridding and polishing types.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations,

M&L for non-skid Ceramic/parking tile coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for cement concrete (1:2:4) Type B1, using 20mm graded crushed stone aggregates in surface channels and drains complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 ®

Note: An amount of Rs 11,400.00 on account of Credit Schedule for Schedule A Part II shall be deducted from the total amount of BOQ to arrive at Contract Sum.

SANTOSH CONSTRUCTION (BID ID -3507856)

KAJAL CONSTRUCTION (BID ID -3507666)