Providing Furniture arrangements for the work of Construction of Additional Civil Block building in Government college of Engineering campus at Tirunelveli

Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be got approved by Executive Engineer before use.

Without Automatic Door closure and Pivot but with hinges

WithAutomatic Door closure and hinges

Towards the charges for repairing the country wooden drawing table, the work involves tightening of all legs and cross beams with nails and screws.The work involves cleaning out old, dried glue and applying of fresh wood glue and using heavy duty clamps pieces for fixing tightly if necessary. The pieces had tobe held tightly together for atleast 24 hours until the gum sets. The damaged plywoods has tobe replaced with good quality matching plywood 9 mm thick. The shallow scratches in working Table has tobe puffed with machines to conceal the light abrasions and the deep scratches noticed has tobe filled using wax filler stick to fill the holes. Finishing the surfaces by applying clear durable protective look like lacquer or polyurethane polishing to prevent future stains and moisture damage etc., complete complying with standard specifications and as directed by the departmental officers.

FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., complete complying with standard specifications and as directed by the departmental officers.

Painting the wall with Texture Finish Paint including labour charges etc., complete complying with standard specifications and as directed by the departmental officers.

Providing Computer work table arrangements of size 0.60m(b) x 0.75m (h) using 17mm thick prelaminated particel board inclusive of prelaminated particle board key board tray and CPU Storage arrangements as directed by the departmentel officers. The rate including transportation charges and excluding GST etc., Complete complying with standard specification and as directesd by the departmental officer.

Supplying of Computer Fabric Push back revolving chair with Seat and back and Nylon Casters Wheels. Pneumatic 5-inch-seat height adjustment type. The Computer Chair size 44 D x 59.5W x 106H including transportation charges and excluding GST etc, Complete complying with standard specification and as directed by the departmental officer.

GST