Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹29.9 L+₹45,233.10 (1.54%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹30.5 L+₹1.0 L (3.51%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹30.9 L+₹1.4 L (4.80%)Rejected-Finance 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L4 | Rejected-Finance High Rate | |
| 5 | L5₹31.5 L+₹2.1 L (7.02%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8350 REPAIR and MAINT TO CERTAIN MISC BR WORKS IN OFFRS JCOs OR MD ACCN AT AFMC UNDER GE (CENTRAL) PUNE
2023_MES_575972_1
8350REPAIR and MAINT TO CERTAIN MISC BR WORKS
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹90,000
Yes
6 Mar 2023
19 Jan 2023
6 Feb 2023
19 Jan 2023
4 Feb 2023
30 Jan 2023
Amount
Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as directed and specified.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) unreinforced
Dismantling floor,hearth or wall tiling incl cement mortar bedding/ backing, removing serviceable tiles to store and rubbish off the premises.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc
Taking down cement plaster of any description from brick, stone walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and material and labour for rendering 15mm thick on any faces of brick work in cement mortar 1:6 all as directed and specified.
Taking down cement plaster of any description from brick, stone walls or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound @ 200 ml per bag of cement on any faces of brick or concrete surface finish the surface even and smooth without using extra cement all as specified and directed. Note :- Liquid water proofing compound to be measured paid separately
Supply only Liquid water proofing compound complete all as spesified and directed.
M&L Preparation of new plastered surface and apply two coat of oil bound distemper over 1-2 mm thick wall care putty complete all as spd and directed
M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.
Material and labour brick work with fly ash bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete as directed and specified.
Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6, type C2, with using 40 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete as specified and directed.
M&L for 40mm thick in cement concrete type B-1 1:2:4 using 20mm graded aggregate in levelling course/subbase/floor, finish the surface even and smooth without using extra cement complete all as specified and as directed
M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate in levelling course/subbase/floor, finish the surface even and smooth without using extra cement complete all as specified and as directed
Material and labour for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exc 0.11 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.
Material and labour Virified Ceramic tiles (light shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.
Material and labour Virified Ceramic tiles (light shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting, set and jointed in neat cement slurrry and 10mm thick backing coat in CM (1:4) including tringular filletting in CM 1:4 on top of tiles.
M&L for glazed ceramic coloured tiles 300mm x 600mm size 5 to 6mm thick in dados or skirting over rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles as directed and specified.
M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15mm thick screed bed in CM 1:4 complete
ditto all as item 26 above but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillars polished to entire satisfaction of Engineer-in-Charge laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete
M&L 20mm thick granite (of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 as in floor / skirting / risers or as in vertical support with edges polished / rounded or counter top for wash basin as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete
Material and labour for Chequered cement concrete tiles 25Cm x 25 Cm x 25mm thick over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified.
M&L for Machine Pressed Precast concrete glossy interlocking Paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment including 25 mm thick sand coushioning complete all as spd and directed
Dismantling broken/damaged PVC Water storage tanks and Supply and Fix rotational moulded polythylene water storage tanks, 500 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
Dismantling broken/damaged PVC Water storage tanks and Supply and Fix rotational moulded polythylene water storage tanks, 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
Rounding edges of kota stone slabs/granite one edge such as in steps and other similar situation including cutting two lines of 5mm wide and 3mm deep in straight line and perfect shape including necessary tools and labour complete
MS window handle 125mm fixed in repairs with nut or bolt to steel windows fixed at any height (i.e. upto three storey) complete
Supply and fixed in repair box type window hinges for steel window in lieu of broken projected type hinges or any type by welding of suitable size at site at any height (i.e. three storeyed) complete as directed by Engineer-in-charge
Dismantling of boarding, any description fixed in any position with nails i.e. in false ceiling and wall lining etc and similar position complete.
S&F Anodised aluminium snap grid framed work for false ceiling and incl hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete.
M&L for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed
Taking down chowkats or frames of wooden or steel n.exc 1.5 sqm (without taking off shutters from the frames).
Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames).
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge.
S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352
S&F powder coated aluminium three track sliding Glazed window with three shutters, side 03 shutters sliding, each shutter width one half of the lenght of the window with the following specification and making good the adjacent surfaces incld loading & unloading :- (i) Cross section of window frame 101 x 40 x 1.5mm thick (ii) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.1 mm thick (iii) sliding shutter frame of cross section 40x 18x 1mm (iv) Aluminium glazing strip of size 18.2 x 16.66mm (v) 5mm thick float glass superior quality make Modi Float for 02 Nos shutter (vi) IDPE rubber gasket for fixing (vii) Locking cleat per shutter - 01 No
Taking down shutters of any description exceeding 1 sqm and n exceeding 2 sqm each complete all as specified and as directed.
S&F flush door 35mm thick solid core construction with block board core and ply wood face panel commercial type on both faces.
S&F butt hinges 100mm size stainless steel medium weight all as specified.
S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.
S&F aluminium handles, anodised, cast type, of size 150 mm
S&F aluminium alloy, anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250mm complete all as specified.
Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-
(a) 15mm bore
(b) 20mm bore
(c) 25mm bore
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and as directed of the following sizes
(a) 15mm bore
(b) 20mm bore
(c) 25mm bore
S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed of the following sizes :-
(a) 15mm bore
(b) 20mm bore
(c) 25mm bore
S & F in repairs stop valves 15mm bore of brass cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair PVC connection 15 x 600mm.
S&F in repair angle cock 15mm bore CP Make : Parryware or equivalent
S&F in repairs CP health faucet with flexible pipe fancy type complete all as specified and directed.
S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed of following sizes :-
(a) 110mm bore
(b) 75mm bore
S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
Supply and Fix in repairs vitreous china Wash hand basin flat back, size 630x450mm white excluding pillar taps & waste pipe but including Waste coupling PTMT and fixing brackets complete
Supply and Fix in repairs Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete.
Supply and Fix in repairs vitreous china bowl urinal (Top inlet), with fixing accessories full stall type, including PVC down waste pipe, fixing plugs etc and fix to walls and connect to existing flush systems complete as directed and specified
S & F in repairs vitreous China white wash down water closet pan pedestal pattern( combination of flushing cistern & EWC including fixing bolts,white soft close seat cover closed pattern with flat bottom (white colour) and cover complete all as specified and directed at site
S & F in repairs fancy type chromium plated two way bib tap fancy type,cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed at site.Make Jaquar or equivalent
S & F in repairs fancy type chromium plated bib tap, cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed at site.
S&F in repair 600mm long stainless steel towel rail complete all as specified and directed at site. Make Jaquar/ Equivalent
S&F in repair soap dish holder complete all as specified and directed at site.
S&F Toilet paper holder with stainless steel flap complete all as specified and as directed.
S&F in repair aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm.
S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long.
S&F in repair butt hinges 100mm size stainless steel medium weight all as specified.
S&F in repair aluminium handles, anodised, cast type, of size 150 mm
S&F in repair stainless steel wire cloth, o.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples.
Hacking out old broken glasses of any thickness size & quality from wodden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc all as directed and specified.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed
Supply and fix in repair figured glass, pinhead type, 3mm thick and glaxing with oil putty/ wooden beads in squares n exc 0.50 sqm each pane
REKHA ELECTRICALS
M/s Omkar Associates
PRASHANT CONSTRUCTION
Ares Construction Company
Mourya Enterprises
Vijay Construction and Company
Gauri Associates
Parhar Enterprise
BAGESHWARY CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .