Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana

Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and the

like consisting of: (i) Ist course of applying cement slurry @ 4.4

kg/Sqm mixed with water proofing compound conforming to IS 2645

in recommended proportions including rounding off junction of

vertical and horizontal surface. (ii) IInd course of 20 mm cement

2.5 22.3 plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing Sqm 120.00 769.60 748.82 89,858.50

compound in recommended proportion including rounding off

junction of vertical and horizontal surface. (iii) IIIrd course of

applying blown or residual bitumen applied hot at 1.7 kg. per Sqm of

area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and pasted to each

other with bitumen @ 1.7 kg/Sqm).

Digitally signed by ARTI

Designing, Providing, installation and fixing of roof Puff panels made

up of 50+80mm thick composite PUF panels sandwiched between

PPGI 0.5mm Sheets including all required necessary hardware,

fittings and fixture. The outer skin of trapezoidal PPGI sheet with

depth of crest -28-30mm. Pitch 195-200mm trapezoidal sheet &

inner skin micro riving PPGI sheet & minimum 50mm thick layer of

rigid CFC free polyurethane foam of density of 40±2 Kg/m3 as

insulation. The color of PPGI sheetto be as per approval of engineer-

in-charge/ Architect. The gaps between puff panels to be sealed as

per manufacturers specifications to make it air and water tight to

prevent the entry of dust and water seepage in case of extreme

weather conditions.

Designing, providing, installation and fixing of walls made out of GI

Steel Sheet 0.5MM - EPS - Steel composite sand coated insulated

sandwich panels with toughned groove locking systems complete as

per directions of engineer-in-charge/ Architect.The E.P.S. used as the

3.2 MR core will be self extinguishing type. The overall thickness of the wall Sqm 260.00 6,734.00 6,734.00 17,50,840.00

shall not be less than 72mm. The item to include all nessesary

hardware, fittings and fixtures required. The item to also include

making nessesary cut-outs for doors, windows, ventilators, etc with

complete sub-frame and finishing.

Steel work welded in built up sections/ framed work, including

3.3 10.25 cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Digitally signed by ARTI

Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer, including

welding and bolted with special shaped washers etc. complete. The

item also include structure required for collateral load of MEP

services and false ceiling suspension works.

3.4.1 10.16.1 Hot finished welded type tubes. KG 30,964.72 194.40 189.15 58,57,014.01

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves

for linear as well as curvilinear portions of the building , for all

heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper

drainage of water to make it watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic colour

of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick).

The aluminium composite panel cladding sheet shall be coil coated,

with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin

coating of approved colour and shade on face # 1 and polymer

(Service) coating on face # 2 as specified using stainless steel screws,

nuts, bolts, washers, cleats, weather silicone sealant, backer rods

Digitally signed by ARTI

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot

Dip Galvanised with serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins and anchor bolts of

approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and

drawing. The item includes cost of all material & labour component,

the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the

assembled working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under the

relevant aluminium items.

The Contractor shall provide curtain wall with aluminium composite

panel cladding, having all the performance characteristics all

complete , as per the Architectural drawings, as per item

description, as specified, as per the approvedshop drawings and as

directed by the Engineer-in-Charge. However, for the purpose of

payment, only the actual area on the external face of the curtain

wall with Aluminum Composite Panel Cladding (including width of

groove) shall be measured in sqm. up to two decimal places.

Providing & Fixing Hilti/ Fischer fastener 150 mm long 10 mm thick

3.7 MR Epoxy Fischer CHEMICAL FIS EM 585 S Creating the hole & Blowing Nos 210.00 1,608.00 1,608.00 3,37,680.00

as per direction of engineer in charge

Digitally signed by ARTI

Providing & Fixing Drain Board Gutter for the drain out the rain

water from terrace as per MS or GI As per Design.

Supply & Installation of roof with co-extruded, UV protected, multi-

layered / multi-cell connectible modular polycarbonate panel

system. The system consisting of 18mm thick standing seam panel

with X-cell truss bracing design structure for better strength and

flexibility in seven layers with all fixing accessories to ensure best

performance for wind uplift, vibration, oil canning and visual

appearance. Panels shall be fixed on Purlins of MS / aluminium

4 structure (to be paid Separately) with wide trapezoidal SS

fastener/cleat (in SS-304 in 1mm thick) with top holding of 80mm on

standing seam, fixed with purlins with 3 numbers of self-drilling

screws to ensure a pull-out load of min. 7000 N (7KN) tested as per

ISO 6892:1998 and IS 1608: 2005. The entire fixing mechanism shall

be covered with a continuous U/2, interlocking connectible

connectors with grip lock anti pop double tooth locking mechanism

running lengthwise at both sides of the panel. Each panel shall be

flux solo opaque type with opaque and clear combination of louvers

inside the single panel i.e. with transparent body and opaque layers

in between the layers creating 'Light Duct' for better ambience &

MR increased shading. Panels with more layers will be preferred for Sqm 150 5,064.00 5,064.00 7,59,600.00

better insulation and improved shading coefficient. U value of such

panel shall not be more than 1.9 Watt/m2K as per EN ISO 10077-

2:2018 and respective third-Party test certificate shall be produced

before procurement. The width of the panels shall not be less than

1220 mm. Panels must satisfy Dart drop impact test as per IS 14443-

97 shall show no sign of breakage on Polycarbonate sheets which

have been exposed to UV for a min. of 500 Hours as per ASTM G

155. Panels shall not have Yellowness Index as per ASTM D2244

(standard D65 illuminant, CIELAB) not more than 1 unit when tested

on a sample exposed to UV/weathering test for 2500 Hours as per

ASTM D4329. The panel shall be with additional sealing / breathing

tape, Aluminium U profile for ends, screws etc. as per standard

accessories as required. Panel shall be fixed conforming to the

detailed methodology & guideline as per the manufacturer. Trained

and factory authorized labour shall be used with supervision to Digitally signed by ARTI

complete the entire panel installation as per drawing and direction Date: 2025.06.17 12:10:46 IST

inside the single panel i.e. with transparent body and opaque layers

in between the layers creating 'Light Duct' for better ambience &

MR increased shading. Panels with more layers will be preferred for Sqm 150 5,064.00 5,064.00 7,59,600.00

better insulation and improved shading coefficient. U value of such

panel shall not be more than 1.9 Watt/m2K as per EN ISO 10077-

2:2018 and respective third-Party test certificate shall be produced

before procurement. The width of the panels shall not be less than

1220 mm. Panels must satisfy Dart drop impact test as per IS 14443-

97 shall show no sign of breakage on Polycarbonate sheets which

have been exposed to UV for a min. of 500 Hours as per ASTM G

155. Panels shall not have Yellowness Index as per ASTM D2244

(standard D65 illuminant, CIELAB) not more than 1 unit when tested

on a sample exposed to UV/weathering test for 2500 Hours as per

ASTM D4329. The panel shall be with additional sealing / breathing

tape, Aluminium U profile for ends, screws etc. as per standard

accessories as required. Panel shall be fixed conforming to the

detailed methodology & guideline as per the manufacturer. Trained

and factory authorized labour shall be used with supervision to

complete the entire panel installation as per drawing and direction

of the engineering in charge.

Total of Civil Work 130,16,481.84

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

S NO DSR 2023/ MR DESCRIPTION UNIT QTY. RATE Amount

1 FLOORING WORKS

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

1.1 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement

and matching pigments etc, complete.

Providing and laying machine cut, mirror polished Marble stone flooring, in required design

patterns of different colours, shades and finished surface texture etc., treated with required

chemical from base and joints, in linear portions of the building, all complete as per the

architectural drawings, with upto 20 mm thick stone slab laid over 20 - 25 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse to specified and as directed by the Engineer-in-

Charge. match the marble shade, including rubbing, curing and polishing etc. all complete as

cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment

sand) laid and jointed with white 20 mm thick Marble stone slab (Crema Purrisima, Bianco Siena

or equivalent) in italian finish. for mail launge floor area ( Basic stone rate Rs. 16678 per sqm

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining

(wall panelling) including dado, skirting, risers of steps etc., in required design and pattern

wherever required, stones of different finished surface texture, on 12 mm (average) thick cement

1.3 MR mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm

including pointing with white cement slurry admixed with pigment of matching shade, including

rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the

Engineer-in-Charge.

20 mm thick Marble stone slab ( Statuario, Emrald harmony, Panda or equivallent) in italian finish.

for main lounge wall area ( Basic stone rate Rs. 62408 per sqm excluding GST)

Digitally signed by ARTI

Providing & Fixing Herring Boon of ENGINEERED WOODEN FLOORING Panel 540x90 Total

thickness 15 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6 m2 per pack

1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board

PEFC controlled sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue

and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions in each pack 33 years

Uniclic - Multifit connection Lifetime Commercial On request "Wood for Life" Edge Protect +

Provides a warranty on build-up of residue dirt along the edges due to maintenance over the

years 5 years "Wood for Life" Surface & Edge Protect + (lacquered products only) Provides a

warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges

due to maintenance over the years 10 years Surface layer Wood species Oak Origin Europe

Finishing UV cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural

variance Due to nature, visual surface can deviate from samples Surface treatments cf

catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping -

difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1

cupping in width % ≤ 0,2 Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30

Changes 30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints short side (mm) ≤ 0,20 Open

joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special installation instructions or its

2 FALSE CEILING WORKS

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line

2.1 MR with external glazing as per details of Architect. Rate to include finishing exposed surfaces of the RM 29 2,124.00 61,596.00

Pelmet with enamel paint of approved shade or 1mm laminate.

Digitally signed by ARTI

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/Sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

2.2 12.45 to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing compound ,

jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides

of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board

with BIS certification marks)

Digitally signed by ARTI

Metallic Grid Ceiling for Kitchen :-

Providing and installing Stainles ceiling : To comprise 3000mm long ‘C’ channels(.5mm) of size

11X40X11 mm spaced at 1200mm centers securely fixed to the soffit by support of soffit clit. The

last hanger at the end of each C channel should not be greater than 600mm from the adjacent

wall. Use a C-channel jointer for joining two pieces of C-channels. 3000mm Spring T bar 24*34

mm shall be spaced at 600mm centers in a direction perpendicular to the C-channels and shall be

secured at every intersection with C channel using a Spring T bar hanger. Use of Spring T bar

connector to join two pieces of T Bar main carriers. Tiles should be clipped in between two Spring

T Bar from below. This system is a downward installation. Installation to be carried out by Bollard

Trained Installation team & Installation should be carried out as per recommended procedure.

Perimeter trims to be of L wall angles made out of Stainless Steel secured to walls at 450mm

maximum centers. Cut tiles to be secured to the wall angles.s Steel Clip-in Ceiling system of

600X600X.5mm on Spring T bar to be suspended through C channel and L SS wall angle to be used

in the periphery. Clip in tiles in 0.5 mm thickness SS Grade 304.

Aluminium Extruded Snap On Baffle - Supply and Installation of Aluminium batten on prepared

ceiling / wall surface or partition surface in straight pattern. Click type system 2 parts Aluminium

battens of grade 6063 with Powder Coating SOLID / WOODENC) Of aapproved colour wrapped on

them. The clear spacing between 2 vertical lines of baffles to be 75 mm / 100mm. / 125 mm. The

back wall to be made perfectly levelled. The base plate to be screwed to the wall/ partition at

regular intervals vertically or horizontally as per design. The top part to be snap fitted in place. The

whole assembly to have a perfect tight fit. The joints in the Battens to be seamless and cut panels

at angle or right angles to be perfectly matched. - Two Part click-type system. - Batten colour

texture - AS PER APPROVAL -.vendor to consider matching end caps.

Finish: SOLID / WOOD look concealled fix timber Batten cladding.

3 PARTITION AND WALL PANELING

Providing and fixing Aluminium Tube 50X25 X1.5 mm Thick Tube which includes framework made

of special section as per partition /Panelling work as per direction of Engineer in charge

Digitally signed by ARTI

Supply and Installation of Unitized Glazing System of 24mm DGU Glass ( 6mmTHK HS + 12mm

Air Gap + 6mm Clear Toughened Glass.) System comprsing of Curtain wall MULLION Section (min.

137 x 67 x 2mm) & Curtain wall Transom Section (min. 137 x 67 x 2mm) assembly designed as

per IS codes with glass glazed on sash panels including Structural silicone Dow Corning, double

adhesive spacer tapes, MS Brackets, Anchor fastners/ screws, EPDM gasket, glass to glass joint

weather silicone, etc. All exposed aluminium profiles shall be Powder coated As per Approved

shade. The anchoring / bracing of the structural glazing to the RCC slab / beams / columns shall be

done brackets fixed with Anchor fasteners in the concrete and to withstand the dead load of the

structural glazing as well as stresses due to wind pressure etc. All bolts, nuts, screws and washers

are of GI /stainless steel. ) Bracketing system with serrated MS hot dipped galvanised iron

/Aluminium alloy of 6063-HE9 brackets of required sizes, sections and profiles etc. to

accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural

3.2 MR glazing system rigidly to the RCC/masonry/structural steel framework of building structure using Sqm 152 29,199.00 44,38,248.00

stainless steel anchor fasteners/ bolts of approved make, nylon separator to prevent bimetallic

contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in

required numbers.

(d) Providing and filling, two part pump filled, structural silicone sealant and one part weather

silicone sealant compatible with the structural silicone sealant of required bite size in a clean and

controlled factory /work shop environment , including double sided spacer tape, setting blocks

and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design

3.3 MR UPVC GLASS DOOR WITH DGU GLASS - 1000 / 1200MM X 2400MM Sqm 5.30 41,117.00 2,17,920.10

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of

3.4 9.140 approved primer on one face, and fixed on wooden /steel frame work, complete as per direction

of Engineer-in-Charge

3.4.1 9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type Sqm 211 1,224.65 1,191.58 2,51,424.32

3.4.2 MR 18mm thick commercial ply conforming to IS : 1328 BWR type Sqm 23 2,449.00 56,327.00

Providing & Fixing 4 mm Thick MDF & 1 mm decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective surface layer with matching

3.5 MR groove pigment as approved by engineer in charge Sqm 18 2,563.00 46,134.00

Digitally signed by ARTI

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface up to12mm thick sheets straight fabricated on a single

face, finished in matte finish, pasted with industrial grade silicon on a existing robust substrate.

Substrate shall be with suitable Aluminium section as per structural requirement and covered with

12 mm thick ply as per the design and dimensions approved. For wall claddings, column claddings,

table tops, serving counters etc.

3.7 MR Same as above but for counters and serving tables. Sqm 23 15,017.00 3,45,391.00

Providing and Installing 5mm thk. Float glass mirror of approved make with polished edge on wall

over existing 12mm thk. Ply base with required adhesive/ silicon.

WOODWORKS WALL PANEL (2400X192X15) - Providing of make Channeled Woodworks

perforated panels Custom Perforated of width 192mm, thickness of 17mm and length 2440 mm ,

made of a HDHMR FR Grade board with minimum 860 Kg/M3 density substrate with a laminated

facing as per the approved shade & finish (Khaya Mahagony/Fusion Mapple/ Bavarian Beech) and

a melamine balancing layer on the reverse side. The boards shall have a special perforation

pattern of 3mm width Custom Perforaton of visible panel each. The edges of the panels shall be

“tongue-and-grooved” to receive special clips for installation. The back of the perforated panel

shall have sound absorbing non-woven acoustical fleece having NRC of 0.60. The panels shall be

3.9 MR mounted on special aluminium splines (keel) using clips provided by manufacturer. Sqm 82 8,402.00 6,88,964.00

Screw the aluminium extruded keel for channelled woodworks provided by manufacturer over the

solid wall/ surface an on-centre distance of 600mm. Place the inside clip on the groove end of the

panel along the Al keel and then place the tongue end of the next panel. Continue installing rows

of panels by inserting the tongue into the groove of the earlier inserted panel and progressively

installing inside clips into the next keel till the actual height is achieved. Installation to be carried

out by Trained Installation team & Installation should be carried out as per manufacturer

recommended procedure.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over

and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Digitally signed by ARTI

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare

the surface even and smooth complete.

4 JOINERY WORKS

Veneer + laminate Flush Doors

Providing and fixing phenol bonded flush door shutters 35 mm thick of approved quality non

decorative type core of block board construction finished with 4 mm thick veneer of approved

quality on one side of shutter & 1mm thk. laminate on other side (total thickness 40 mm)

4.1 MR including cost of concealed hinges, wood lipping of size 40 mm x 12 mm with polishing etc. Cost of Each 5 53630.00 268150

Hardware: Concealed Door Closer, Mortice Lock with Handle (As per approved pattern / size),

Floor Stopper, with required SS screws. Complete in all respect as per direction of site

incharge/Architect.

Jaali Paneling for Guest Sitting Area :

MDF JALI:- Providing and fixing of 30 mm thick Metallic Duco painted CNC cut MDF Jali as per

approved sample / design with frame all around the Jaali of size 150 X 75mm finished with same

metallic duco paint finish as on Jaali. The rates including the cost of oak wood frame work all

around with finishing, fixing arrangement, hardware, nails, Duco paint, finish etc. complete in all

4.2 MR respect as per detailed drawings for all lead & lift, all levels & height, all floors. MDF jaali to also Sqm 42 21452.00 908492.20

have bronze mirror as per detailed drawings. Support for top fixing need to be taken from true

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to

4.3 MR be constructed out of 18 mm MDF, finished with 1mm. Thk laminate shade as per Architect’s RM 5 2,205.00 11,025.00

approval. Cost to include edge margin in teak wood and poilshed in colour matching laminate.

DESIGNER WALL DISPLAY PANEL : Providing & fixing of straight Paneling for walls with shelve

design as per design finished with approved shade of veneer , having cove lights in shelves for

special effects on display. The structure is fixed on metal / aluminium studs covered with 12 mm

plywood for base skeleton. complete with shelves and edge lipping etc.

Digitally signed by ARTI

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets complete

with base cabinet made of 18 mm HDHMR board, finished in 1mm thick Laminate of approved

4.5 MR shade. All internal surfaces to have to balance laminate. The rate inclusive of the necessary RMT 10 25,624.00 2,56,240.00

hardware,complete as per Architects approval. Width of work top counter 600mm/ detailed

drawings. Top will be finished with solid acrylic will be measeaured separate.

5 MISCELLANEOUS WORKS

Providing and Installing Green wall with fully grown plants including alluminium frame structure

to support PVC plater pots placed in approved design to make the vertical greem panel. The item

also include the cost of making required arrangement for drip irrigation system for plants along

with SS drain tray. Approved make: Greenry, Sai Nursery, Always green.

DELIVERABLES - SPECIFICATIONS:

- An aluminium framework for the Complete Green Wall Structure (Support

taken from the ground/wall)

- Biowall Frames (PP) with adequate strength - Minimum pots / sqm (PP

Material) - 25 to 30 nos.

- Irrigation - Internal Drip Irrigation System with Poly tube, Poly tee,

Elbow, Poly valve, Joiner, Take off, Adaptor, End stop (Make - Jain /

Rainbird - Irrigation)

- Timer - Battery Operated Timer (Make - Hunter

- Plants - Fully grown bushy - plants, 12-15 cm long in lightweight

planting media - minimum plant / pot - 4 - 6 Nos.

- Plant Variety - Green Money plant, Oxycardium green-gold, Philodendron

Cylon Gold, Chlorophytum, Syngonium.

- Planting media - Special Organic lightweight planting media

- Maintenance – post-project handover – maintenance in client/FM

- Acclimatization of Plants at the Nursery – 3 to 4 weeks

- The installation of a complete green wall system with a pump should be

made as per approved drawing and as per architect/client approval.

Providing and Installing Green plants along with PVC base pots placed in wooden laminated box

with approved finish and design as per the architectural drawings.

Digitally signed by ARTI

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film

to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm)

without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at

73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm)

on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs

(indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors

payment wouldn't be released until & unless he/she produces orginal warranty certificate from

the manufacturer.

ZEBRA BLINDS - Providing of a Sheer-Dimout Blinds in sheer & semi opaque / translucent fabric ,

with Pelmat Box) & fabric in 100% polyester range ensure adequate darkening & privacy of

Sheer dimout fabric of Solid 70mm -75mm &

( SheerDim Blinds min. 35 mm to 50mm sheer part ) as fabric dimension 70mm X 50 mm of Solid

Thickness of dual fabric : 0.33 to 0.37mm & weight : 90 GSM -140 GSM- (+5%)

specification of fabric 100% polyester of Alchemy / Essence sheermaterial with weight 90 GSM to

light fastness - ( 4-5) grade. (+5%) material of Cosmos & Essence a material of alchemy shade /

Rolling tube of high strength extruded aluminium alloy anodized 38mm OD with a minimum wall

thickness of 1.0mm duly with pocket mechanism of Standard make of a manufacturercompany

DUCO FINISHED VERTICAL MEMBERS: Providing & fixing of duco painted transition edges at wall /

partition edges, wrapping around openings like Jamb / at lintels / at cills etc, formed of 12mm

MDF finished with Duco paint (solid / metallic colour) as per approved shade. Item to include all

5.5 MR necessary arrangements and necessary hardwares, Complete as per detail drawing / as approved Sqm 5 7150.00 35750

by architect, rate should be inclusive of all details as shown in drawing.

Digitally signed by ARTI

Providing and fixing of room signages of size and design as per the approved design and details.

Signages to be made out in MDF with MS frame/ sheet as per the design, powder coated in

5.6 MR metallic shade as approved by architect. Letters and number also to be made in MS sheet cut Each 5 3576.00 17880

letters, powder coated in metallic finish approved shade. The item to include the hanging system

from wall and ceiling as approved.

Artwork to be prepared and designed by the artist as per the designs shared by architect and to

have digital printing with brush strokes over it. Artwork frame to have wooden box frame finished

5.7 MR in metallic shade duco or as per the approved design and shade shared in the presentation. The Each 5 9535.00 47675

Artwork to be hung with hooks on all 4 sides as per the requirement

5.8 MR SS Skirting : Supply and insrtalling of 100 mm PVD coated SS Skirting on existing ply base rmt. 75 3,051.00 2,28,825.00

Floor and wall Transition Profiles : Providing and fixing of PVD coated SS floor / wall transition

5.9 MR profile for transition of different materials to be fixed with adhesive as per manufacturers rmt. 185 2145.00 396825.00

GRAND TOTAL 231,77,408.15

GRAND TOTAL 231,77,408.15

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

3. SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION

Rate (Including

S NO UNIT QUANTITY RATE TOTAL AMOUNT

S NO UNIT QUANTITY RATE TOTAL AMOUNT

2022 factor 1.0633)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with modular switch,

A.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed PVC conduit, and

A.2 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor

single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC

conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding modular

plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 25 122.00 129.72 3,243.07

1.24.5 6 pin 15/16 amp socket outlet Each 25 197.00 209.47 5,236.75

Supplying and fixing following size/module, GI box along with Modular

1.27 base & cover plate on existing modular metal boxes etc. as required. -

Digitally signed by ARTI

B SUBMAIN AND CONTROL WIRING -

Wiring for circuit/ submain wiring alongwith earth wire with the following

1.14 sizes of FR PVC insulated copper conductor, single core cable in surface/ -

recessed medium class PVC conduit as required

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed /

XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to

I.S.7098/1554Aluminium Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium

C.2 conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / -

IS:1554 part-1 respectively & ISI marked.

(b) 3.5 C x 95 Sqmm XLPE cable Metre 20 920.66 920.66 18,413.17

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE

insulated Copper conductor armoured cable of 1.1 KV grade conforming

to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable Metre 35 1,320.94 1,320.94 46,233.06

(b) 4 C x 25 Sqmm XLPE copper cable Metre 20 2,121.52 2,121.52 42,430.34

Digitally signed by ARTI

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI)

Raceways along with required suitable number of GI couplers for joining -

raceways and fixing GI brackets and all accessories complete in all respect

as per the directions of engineer in charge

C.5 MR Supply, Installation, Testing and Commisioning of Junction boxes for

direct access to cables at the intersection of raceways supplied

completely with base and cover plates, height adjustable junction box 65- -

90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

2.10 the existing MCB DB complete with connections, testing and -

commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the

2.13 existing MCB DB complete with connections, testing and commissioning -

D.3 etc. as required.

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

2.4 complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, -

D.4 interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator

Digitally signed by ARTI

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

2.14 sensitivity current upto 300 milliamperes in the existing MCB DB -

complete with connections, testing and commissioning etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the exisitng surface/recessed steel/ PVC

conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong

with accessories in surface/ recess including cutting the wall and making

E.12 good the same incase of recessed conduit as required

Supplying and Installation of following size perforated of painting with

powder coating M.S. cable trays of perforation of not more than 17.5% in

4.1 convinient sections, joined with connectors suspended from the cieleing

with MS suspenders including bolts and nuts painting suspenders etc as

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 45 1,137.00 1,208.97 54,403.74

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover plate

having locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

Total of Electrical items 19,81,837.23

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

Sl no Item Description Image UOM Qty Unit Price Amount

Supply of DALI dimmable 20W COB LED Downlight luminaire having 1600 lumens, with cut-out

(Φ) dia of 80mm and height of 165mm, suitable for pendant mounting. Luminaire shall be made

up of white powder coated extruded Aluminium housing with inbuilt heat sink to provide better

thermal management to enhance LED life.Suspension wire of 0.1-1.5m should be supplied with

the luminaire. The luminaire should be equiped with the secondary optics of high efficiency

reflector with clear glass to have precise light beam to cut down glare. LM 80-08 compliant LEDs

from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided.

LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate

for the same from manufacturer shall be provided. The luminaire should be IP20 rated. The LED

shall be compliant with LM80-08 standard with L70B0 life of 50,000 Hrs tested at maximum

current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The

LEDs used should be with CCT of 4000 K and CRI of Minimum 80. LED Driver shall beDALI 2.0

certified, Integrated type, Isolated, with range 180-264V AC. Driver Efficiency > 85% & 2KV

internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of

less than 10% should be integral to the luminaire. Manufacturer shall have inhouse lab

approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be

submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian

Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885

Digitally signed by ARTI

Supply of DALI dimmable 20W recessed, deep inset COB LED Downlight luminaire having 2000

lumens with dimensions of 125mm dia and height of 72mm. The cut out dia (Φ) should not be

more than 110mm. Luminaire shall be made up of pure polyster powder coated pressure die

cast Aluminium housing with inbuilt heat sink to provide better thermal management to

enhance LED life. The luminaire should be equiped with the secondary optics of high efficiency

chrome reflector. The luminaire should be available with multiple beam angle options of 60°

and fixture should have UGR<15. LM 80-08 compliant ceramic / aluminium base of LEDs from

reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Citizen should be provided.

LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate

for the same from manufacturer shall be provided. The luminaire should be IP20 rated. The LED

2 shall be compliant with LM80-08 standard with L70B0 life of 50000 Hrs tested at maximum No 26 10396 270289

current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The

LEDs used should be with CCT of 4000 K and CRI of Minimum 80. LED Driver shall be DALI2

compliant, 0-100% dimmable, non-integrated type, Isolated, operated driver with range 180-

265V AC. Driver Efficiency > 83% & 2.0KV internal surge protection, Power factor greater than

0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire.

Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India.

LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS

Supply and Installation of elipitical dome shaped suspended designer light fixture made out of

tinted extruded glass with DEAMFLUM Vintage Candelabra Corn LED Light with E14 Base 6+6W

Equivalent Halogen Replacement Tricolor 12W Filament Candle Bulb, as per the approved

Supplying and Installing random cuboid designer light made out of translucent white acrylic, as

per the approved design. Size of the light fixture will be considered as 1800 mm x 600mm

9 LIGHTING MANAGEMENT SYSTEM BOQ

Digitally signed by ARTI

Supply of wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 child DALI

controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10-30mA, 50Hz, DALI

2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of

0-10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA

max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming,

device to device range 45m. Controller must control individually control standard DALI or

Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50

deg celsius, surge protection 3kV. System shall support easy commissioning and configuration

via Mobile Application along with user and site management features. Optional Cloud

Application must be available for control and monitoring of the devices along with analytics

reports. Mobile Application shall have features of individual & group control for

On/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key

for commissioning and replacement for future.

Supply of BLE 5.2 AES 128 Bit encyption based, AC Powered Wireless PIR Motion & Light Sensor

(0-2000 lux). Operates on input voltage of 90-277 V AC with input current of 9mA at 230VAC

and 15mA at 90VAC, 50Hz. Ceiling mounted with maximum height of 4m and maximum

detection range of 14m dia at 4m mounting height. Device to device range 45m, operating

temperature 0 to 80 deg celsius, surge rating 4kV. System shall support easy commissioning and

configuration via Mobile Application along with user and site management features. Optional

Cloud Application must be available for control and monitoring of the devices along with

analytics reports. Mobile Application shall have features of commissioning of the sensors along

with setting step dim function, sensitivity levels and time day options. Device must have

security key for commissioning and replacement for future. Device must have security key for

commissioning and replacement for future.

Digitally signed by ARTI

Supply of BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch

that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V

DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range

9.3 45m. System shall support easy commissioning and configuration via Mobile Application along No 1 7852 7852

with user and site management features. Optional Cloud Application must be available for

control and monitoring of the devices along with analytics reports.

Supply of WiFi and BLE 5.2 AES 128 Bit encyption Gateway with Ethernet and built-in Real Time

Clock for cloud connectivity and scheduling.It is powered by 5V, 2A Mini USB / DC Adaptor and

has 1 ethernet port with 10/100 Mbps data transmission rate. RTC is battery powered with 3V

DC. Device to device range 30m X 30m, operating ambient temperature of -20 to 55 deg celsius.

9.4 System shall support easy commissioning and configuration via Mobile Application along with No 1 31302 31302

user and site management features. Optional Cloud Application must be available for control

and monitoring of the devices along with analytics reports. Device must have security key for

commissioning and replacement for future.

9.5 Comssioning of LMS No 1 88987 88987

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

6.SCHEDULE OF QUANTITIES - FIRE ALARM

Rate (Includiong

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO Factor 1.0633)

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop

modules and capable of supporting not less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length up to 2 km, network communication

card, minimum 320 character graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory (EPROM), power supply unit

(230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to printout log and

17.2.1 facility to have seamless integration with analog/digital voice evacuation system (which is

part of the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open protocol Bacnet/

Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. Nos 30 2,858.00 3,038.91 91,167.34

Supplying, installation, testing & commissioning of response indicator on surface/recessed

2 17.2.5 MS Box having two LED, metallic cover complete with all connections etc as required. Nos 10 276.00 293.47 2,934.71

Supplying, installation, testing & commissioning of intelligent addressable thermal

3 17.2.9 detector with rate of rise cum fixed tempreature thermistor complete with base as Nos 2 2,726.00 2,898.56 5,797.11

Supplying, installation, testing & commissioning of fault isolator complete with base as

Digitally signed by ARTI

Supplying, installation, testing & commisssioning of intelligent addressable programmable

sounder complete as required.

Supplying, installation, testing & commissioning of addressable fire control module

6 17.2.10 complete as required Nos 2 3,003.00 3,193.09 6,386.18

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required.

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with

USB, MP3 player (including 6 zone button paging station) with seamless integration facility

with main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V

rms operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with

annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer

14 17.5.2 sheath complete as required Mtr. 550 173.00 183.95 1,01,173.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in

the existing surface / recessed steel conduit of following pairs, cores and size including

17.5.3 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 430 89.00 94.63 40,692.49

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

and accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

TOTAL FIRE ALARM WORKS 9,44,775.15

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

7. SCHEDULE OF QUANTITIES - LAN / DATA and VOICE WORKS

S NO Description UOM Qty Rate Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

(DSR conductors for Connectivity of Hub room to End Point.High Speed Gigabit

1.53.1) Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

2 MR termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, Nos. 30.00 583.00 17,490.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

3 MR termination at Work Station end Redantant . Keystone Unshielded Outlet, Nos. 30.00 583.00 17,490.00

180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

4 MR termination at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue Nos. 30.00 583.00 17,490.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

5 MR termination at Rack Side end Redantant . Keystone Unshielded Outlet, Nos. 30.00 583.00 17,490.00

180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity.High

Speed Gigabit 24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity. (Rack

end), High Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Digitally signed by ARTI

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH,

C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to Rack End Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH,

C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled

10 MR Staggred Jack Panel for CAT6 cable termination at rack end. Data Active Nos. 2.00 20,500.00 41,000.00

SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum

bending radius 15x OD

SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m.

200 Pair MDF Box

1 MR 50 Pair MDF Box with mounting Frame Nos. 1.00 7,898.00 7,898.00

2 MR 10 Pair Krone Module Nos. 2.00 1,824.00 3,648.00

3 MR 25 Pair Riser Cable Mtr. 35.00 1,455.00 50,925.00

Supply, Installation, Testing & Commissioning of 2MP IR IP H.265 Dome

camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR

distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise

1 MR Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple streams,3- Nos 8.00 29,200.00 2,33,600.00

Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux

with IR,Video Compression H.265+, H.265, H.264, MJPEG,Behavior

Detection Intrusion.

Digitally signed by ARTI

Supply, Installation, Testing and Commissioning of 8Ch Embedded

Network Video Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K

Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Analytics and

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete

etc as required.etc.all complete.

Supply, Installation, Testing & Commissioning of 55" Flat Screen HD led

(24X7) with Interfaces include HDMI, DVI, D-sub, Component and

4 MR Composite input as well as RS-232C and RJ45 for extensive connectivity, Nos 1.00 92,960.00 92,960.00

remote control and wall mount unit / floor stand complete with making

connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 2.00 9,058.00 18,116.00

Total Amount CCTV 9,66,378.54

Total Amount CCTV 9,66,378.54

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

Project Name:- DINNING HALL

Schedule Of Quantity

DINNING TOTAL DSR Rate (in Rate(Including factor DSR Amount MR Rate MR Amount

S. No. DSR 2023 Description Unit

HALL QUANTITY Rs.) 0.973) (in Rs.) (in Rs.) (in Rs.)

1.0 SANITARY FIXTURES & FITTINGS

Supply, Receiving, Storing & Fixing of CP

brass wall mounted sink mixer with C.P. wall

1.4 MR-1 flange, swinging spout complete as required Each 3 3 0 5074.00 15222

with flow rate of 6.0 LPM complying to Green

Building requirements.

Supply, Receiving, Storing & Fixing of C.P.

1.9 MR-2 brass twin coat hook with PVC rawl plug & Each 3 3 0 736.00 2208

C.P. brass screw complete as required. Make :

Providing and fixing unplasticised P.V.C.

connection pipe with PTMT Nuts, collar and

bush of approved quality and colour.

18.74.2 15 mm nominal bore with 45 cm length Each 9 9 121.9 118.6087 1067.4783 0

Digitally signed by ARTI

Providing and fixing Chromium Plated towel

ring Rectangular shape with concealed fittings

1.12 MR-3 arrangement of approved quality and colour, Each 3 3 0 1604.00 4812

of approved brand & manufacture complete as

per direction of Engineer in Charge.

Providing and fixing Cp bras liquid soap

container 109 mm wide, 125 mm high and 112

mm distance from wall of standard shape with

bracket of the same materials with snap

fittings of approved quality and colour,

weighing not less than 105 gms.

Providing and fixing 600x450 mm beveled

edge mirror of superior glass (of approved

1.18 17.31 quality) complete with 6 mm thick hard board Each 3 3 1607.95 1564.53535 4693.60605 0

ground fixed to wooden cleats with C.P. brass

screws and washers complete.

Providing and fixing P.V.C. waste pipe for sink

1.19 17.28 or wash basin including P.V.C. waste fittings 0 0

17.28.2 Flexible pipe 0 0

Digitally signed by ARTI

Providing and fixing C.P. brass long body bib

1.2 18.51 cock of approved quality conforming to IS 0 0

standards and weighing not less than 690 gms.

Providing and Fixing Electric Hot Water Geyser

of Stainless Steel Material Grade 316 with Inlet

and Outlet Connection with 15 mm dia Angle

Valve and Geyser (25 LTR)shall be equipped

with inbuilt non return valve and insulation on

inner and outer surfaces for prevention of

heat losses 2 nos CP round wall flange and CP

Brass Screws and Rawl plugs all other required

accessories Complete in all respect as per

direction of Engineer - in - charge .

10.2 Electric Geyser 25 Litre Capacity Each 1 1 0 11659 11659

0 TOTAL CARRIED OVER TO SUMMARY 41747.8299 39151

2 INTERNAL & EXTERNAL WATER SUPPLY

Digitally signed by ARTI

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of

cutting chases and making good the same

including testing of joints complete as per

direction of Engineer in Charge.

Concealed work, including cutting chases and

making good the walls etc.

Providing and fixing ball valve (brass) of

2.4 18.18 approved quality, High or low pressure, with 0 0

plastic floats complete :

0 TOTAL CARRIED OVER TO SUMMARY 31114.09534 0

SOIL, WASTE, VENT PIPES, RAIN WATER PIPES

Providing and fixing soil, waste and vent pipes

Digitally signed by ARTI

Supplying, Installation, Testing and

Commissioning of uPVC pipes type -B

conforming to IS 13592 (1992) for soil, waste

and vent pipes including all fittings rubber ring

type (plain or with access door) e.g. bends,

junctions, cowls, offsets, access pieces,

jointing with rubber ring joints with lubricant

etc. fixed with clamps to walls with cement

concrete 1:2:4 blocks complete in all respects.

(For Soil & Waste Pipe)

Providing, laying, Jointing, Testing and

commissioning of uPVC pressure pipes of

6Kg/Sqcm pressure rating class 5 (IS : 4985-

2000) including fittings, tees, bends, clamps,

coupling and adaptors supports, and jointing

with solvent joint, testing and necessary earth

3.2 MR-13 work in excavation, backfilling, disposal of 0

surplus earth with a lead upto 50m complete,

compaction and consolidation Including laying

cement concrete 1:2:4 alround UPVC pipe

including bed concrete and thrust blocks at

bends as per standard design (For Soil & Waste

Digitally signed by ARTI

Supplying, Installation, Testing and

Commissioning of uPVC, P or S trap of self

cleansing design with / without vent. arm

Setting in cement concrete 1:2:4 mix

complete including cost of cutting & making

good the Wall / Floors wherever required.

Providing and fixing floor drain with jali size

110X50 size inlet and outlet including cutting

and making good the walls and floors

wherever required complete in all respects.

Providing and fixing 125 mm dia, 3 mm thick

Stainless steel grating with frame for floor

traps or drains of required pattern including

cutting and making good the floors complete.

Providing and fixing cast brass Cleanout plug

with suitable insert keys for opening in brass

cap, male threaded joint/reducer with G.I.

socket caulked to Pipe/fittings of CI pipe

including cost of lead joints etc. complete in all

TOTAL CARRIED OVER TO SUMMARY 0 17499.425

Digitally signed by ARTI

Total for Plumbing works 129512.3502

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

Project Name:-POWER GRID(DINING HALL)

FIRE FIGHTING ESTIMATE

ITEM CODE NO. RATE Rate AMOUNT

S.NO. DSR 2022 FF DESCRIPTION OF ITEMS QUANTITY UNIT Including factor

A. SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM FOR

18.7 Providing Laying Testing and Commissioning of Class C Heavy duty MS Pipe

Conforming to IS 3589 /IS 1239 including Fittings like elbows , tees , flanges , tapers ,

nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp /

support frame and painting with two or more coats of synthetic enamel paint of

required shade complete as required .

18.21 Providing , Fixing , Testing and Commissioning of 15 mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories .

18.21.1 Pendent Sprinkler 32 Each 522.00 555.04 17761.36

18.21.2 Upright Sprinkler 32 Each 522.00 555.04 17761.36

Digitally signed by ARTI

18.25 Supply , Installation , Testing and Commissioning of Sprinkler Flexible pipe ( UL Listed )

of stainless steel complete with 15 NPT on reducer thread with maximum working

pressure of 175 PSI test pressure of 875 PSI ( Burst ) with branch line ( Inlet ) 25 mm

NPT male thread to sprinkler head ( outlet ) 15 mm NPT female thread with reducer ,

nipple , 2 side brackets , center bracket , stock bar of following sizes complete as

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 2,52,233.90

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC Rate(Including

S No DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S No DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2019/DSR 2022 1.0633 factor)

Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow / Variable Refrigerant

Volume air cooled Outdoor units suitable for cooling and heating ,having all hermetically sealed inverter type

Scroll Compressor(s), minimum two compressors for above14 HP modules, microprocessor based Controller ,top

discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc.

complete as required. The unit shall delivert hearted capacity at AHRI Conditions and work even at 50°C ambient

temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase ,50Hz AC power supply.

The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI

conditions shall not be less than 3.7 and IEER not less than 6.5 .

Note: The VRV/VRF system will be installed at scattered locations as per the heat load at all floor levels nothing

shall be paid extra on account of loading and unloading of material at different locations and heights.outdoor unit

selection minimum two.

Supply, installation, testing and commissioning of following minimum capacity and external static pressure

VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary

2 MR supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit

shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with

3 MR suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O

tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

3.1 i 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 25 mm thick insulation m 35 767.00 767.00 26,845.00

3.2 ii 15.86 mm dia above (OD) (Soft drawn) with tube thickness 1.2 mm with 25 mm thick insulation m 5 1,201.00 1,201.00 6,005.00

3.3 iii 19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 25 mm thick insulation m 35 2,075.00 2,075.00 72,625.00

3.4 iv 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 25 mm thick insulation m 5 2,319.00 2,319.00 11,595.00

Supply, installation, testing & commissioning of refrigerant piping Y-joints or headers as required to connect the

above outdoor units and indoor units complete as required.

Providing & fixing 2C x 1.5 Sq. mm copper conductor Control Cable shielded control cum transmission wiring in

medium duty PVC Conduit with accessories between indoor and outdoor units complete as required.

CHAPTER 2: AIR DISTRIBUTION SYSTEM

4 GSS DUCT (Factory Fabricated Duct)

Digitally signed by ARTI

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/ round

ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

DSR-2022 approved drawings and specifications of following sheet thickness complete as required.

Digitally signed by ARTI

Note:- The Duct with TDF Flanges shall be accepted with following:

1.For reinforcement of Duct shall be followed as per IS-655:2006 table number 23.

2.Permissible Duct leakage shall be followed for duct construction mention in CPWD Specification at Page number

3. Steel Wire rope supports as per approved make list can also be accepted as an alternative for conventional

rigid support system.

5 GSS DUCT (Site Fabricated Duct)

Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting

DSR-2022 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved

drawings and specifications of following sheet thickness complete as required.

6 GRILLES & DIFFUSERS:

Supplying , installation, testing ,balancing & fixing of powder coated extruded aluminium Grills of various sizes

Supplying & fixing of powder coated extruded aluminium Supply Air Grills (of approved shade) with aluminium

volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills (of approved shade) with louvers but

without volume control dampers complete as required.

CHAPTER 03: PIPING

7 MR PVC DRAIN PIPES:

Providing and fixing of Hard CPVC drain water piping with fittings, support and insulated with 6mm thick closed

cell elastomeric nitrile rubber insulation complete as per specifications. As per specification/drawings and as

directed by Engineer In Charge.

7.1 i 32 mm dia (with 6mm Nitrile) Rmt 10 499.00 499.00 4,990.00

CHAPTER 05: INSULATION & ACOUSTIC

8 DUCT INSULATION

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber

(Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be

sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

9 DUCT & PLENUM ACOUSTIC LINING: -

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool

having density of 50 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre

MR covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface Sqmt 15 1,313.00 1,313.00 19,695.00

of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per

specifications.

10 MR DOUBLE LAYER CANVAS CONNECTION -

Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end

connection of Indoor units and TFAs to reduce the vibration.It shall be fire rated for atleaSt 2 hrs. Nos 2 11,549.00 11,549.00 23,098.00

Digitally signed by ARTI

CHAPTER 6: THE ACTIVE AIR PURIFICATION SYSTEM - -

The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of Bipolar

Ionisation System. The Bipolar Ionisation System shall be of Needle Point Model (Needle Point should have

Nitinol (nickel titanium) Needles) and Carbon Fibre Brush Model, System should produce positive and negative

ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants including pathogens, Volatile

Organic Compounds and Particulate Matter within the occupied space.The ionizer shall be installed at the fan inlet

6 MR of fan coil units, VRF cassettes, ductless splits , AHU and Ductable HVAC System. The Unit should accept 12-24

VAC/DC. Product should have UL 867 and UL 2998 certification (for zero ozone emission) , UL 2043 (for Fire and

Smoke Safety) , ISO 16000 , CSA C22.2# 187 on atleast any one product .The OEM shall have Efficacy test report

on SARS-CoV-2 OMICRON VARIANT and from any Internationally/Nationally recognised Laboratory.

Total HVAC Cost 30,79,185.74

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

S. NO. SPECIFICATION UNIT TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

Digitally signed by ARTI

Digitally signed by ARTI

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

AUDIO VIDEO SYSTEM FOR VIP DINING HALL

SR. NO. ITEM DESCRIPTION UNIT QTY UNIT PRICE TOTAL AMT.(INR)

SITC of 4" Ceiling speaker:

Compact Full Range 4" Ceiling Speaker with 30 W RMS power @ 8 Ohms, Frequency Response (±3

1.00 dB) 102Hz - 20kHz, Frequency Range (-10 dB) 70 Hz - 20 kHz, Sensitivity 84 dB, 120 degrees No's 4.00 30,998.00 1,23,992.00

Coverage, Maximum SPL 99 dB Average and 105 dB Peak, Transformer Taps @ 70 V/100V: 25 W /

12.5 W / 6.3 W, UL and EN 54-24:2008 certified.

SITC of Dual Channel 240Watts Power amplifier:

Dual Channel Commercial Class D Amplifier with Energy Star Certification delivering 2 x 120 W @

4/8 Ohms and 70V/100V, distortion <0.05%, Frequency response 20 Hz to 20 kHz, +0.5 / -1 dB,

Signal-to-noise >97 dBA.

SITC of Hanging Microphone Array.

Element: Fixed-charge back plate, permanently polarized condenser. Polar Pattern: Omni

directional. Frequency Response: 20-16,000Hz. Open Circuit Sensitivity: -36 dB (15.85 mV)

(0dB=1V/Pa, 1 kHz), Maximum Input Sound Level: 132.5 dB SPL (1 kHz at 1% THD). Signal-to-Noise

Ratio: 66.5 dB, 1 kHz at 1 Pa. Impedance- 100 ohms, Output Connector: Euroblock connector.

Accessories Included: Ceiling Mount; RJ45 breakout cable (×2); seismic cable

SITC of 8 x 3 Digital Mixer

AEC Enable Input Channel: Minimum 6 or more. 1 x Stereo Line Input. 3 x Line Output or more.

Frequency Response : 20 Hz to 20 kHz. THD: 0.03% or better. Signal-to-noise ratio : 90dB or better.

Dynamic Range : 110dB or better, Common-Mode Rejection Ratio : 80dB or higher.Channel

Separation : -80dB or less. USB audio interface for soft codec application. Digital Network Link Port

for future expansion IP / RS232 port for third-party control.

5.00 VIDEO SYSTEM 0.00

Digitally signed by ARTI

SITC of 65" Display:

65" 4K UHD(3840 X 2160) LED display, 500 Cd/m2, Android 11.0 based SOC with Quad Core

Processor, ARM Mali G51, GUP, 4GB RAM, 32GB Memory, HDMI 2.0 X 2, DP1.2 IN(Shared with USB

Type C) X 1, USB 3.0 X 1, USB 2.0 X 1, RJ45 X 1, RS232 X 1, Audio Out x 1, Digital Audio Out x 1,

HDMI 2.0 Out x 1, 24W in built speaker, 24/7 operation, Wifi(Optional dongle), Bluetooth, No

5.1 signal Power Off, RS232 and LAN Control, OSD and UI rotation, USB Auto play function, Multi Nos. 1.00 2,86,031.00 2,86,031.00

screen support upto 3 x 3, Multi functional USB Type C( for Audio, Video, Network, Microphone,

65W charging, Camera connectivity), Wireless Screen sharing with Airplay, Miracast and Mirroring,

PIP/PBP support, Landscape and Portrait mode, Instand mobile content ransfer, Multi mode play,

Content scheduling and signage software.Device management system compatible, OPS Slot

available with Mounting Bracket.

SITC of Cable Cubby:

5.2 Cable Cubby with 1x HDMI, 1 x USB-C, 1x USB-A Passthough and 2 x Power Socket outlet and 1 x Nos. 1.00 44,693.00 44,693.00

SITC of PTZ Camera:

PTZ Camera with HDMI Output and USB : Designed for video conferencing and other applications

such as lecture capture and distance education, HDMI output, USB 2.0 interface for video and

camera control, Universal PC compatibility through standard UVC (USB Video Class) driver, High

performance imaging, fine detail, and color rendering with 1/2.8″ low-noise, HD CMOS sensor,

Multi-element zoom lens with 10x optical zoom and a 60.9° horizontal field of view.

SITC of Two-Input Switcher for HDMI and USB-C with USB Hub

System Type: Two-Input Switcher for HDMI and USB-C with USB Hub. Input Port: 1 x HDMI, 1 x USB-

C. Output Port: 1 x HDMI. USB-C input for AV and data. Integrated USB 3.0 hub. Resolution

Support: 4K/UHD @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats. Automatic

5.4 input selection and automatic display control. USB : Signal - 2.0, Maximum Data Rate - 120 Mbps. Nos. 1.00 1,82,345.00 1,82,345.00

Pixel Clock: 600 MHz. USB-C: Up to 4K/UHD @ 60 Hz. Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0,

Color Depth: 8-bit, 10-bit, 12-bit. Frequency Response: 20 Hz to 20 kHz, ±0.5 dB. THD + N < 0.004%

@ 20 Hz to 20 kHz. SNR: > 94 dB @ 1 kHz, HDCP 2.2 & CEC pass through, Control : TCP/IP and RS-

6.00 INSTALLATION EQUIPMENTS 0.00

Digitally signed by ARTI

SITC of 12 U AV Rack

With front glass door

power distribution box

Internal fans and lights, wheels.

SITC of Certified 4K High Speed HDMI Cable – 7.50m, black.

HDMI version 1.4 – 10.2Gbps for resolutions up to 4K UltraHD 30Hz

Gold plated precision contacts with PureLink SLS. HDMI-A male to HDMI-A male, High purity,

tinned OFC copper conductors and triple shielding, AWG24.

SITC of Certified 4K Premium High Speed HDMI Cable – 2.00m, black.

HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD 60Hz. Gold plated precision contacts .

HDMI-A male to HDMI-A male. High purity, tinned OFC copper conductors and triple shielding,

SITC of USB 3.2 USB-C Cable with E-Marker – 2.00m.

USB 3.2 (Gen 1x2) – 10Gbps data transmissio. Gold plated precision contacts. USB-C male to USB-C

male. High purity copper conductors and triple shielding. USB Power Delivery 100W, DP Alt-Mode

SITC of USB 2.0 USB-A to USB-B Cable, black, 2.0m,

USB 2.0 - 480Mbps data transmission. Ultra flexible and compact cable and connector

construction. USB-A male to USB-B male with blue strain relief. High purity copper conductors and

graphene nano shielding. Power transmission with max. power output 2A / 5V / 10W.

SITC of Premium Active USB v2.0 USB-A / USB-B Cable – 10.00m.

USB 2.0 – 480Mbps data transmission. Gold plated precision contacts. USB-A male to USB-B male

with PureLink APO. High purity copper conductors and dual shielding, AWG26. Power transmission

with max. power output 0.5A / 5V / 2.5W

SITC of USB 3.2 USB-A AOC Fiber Optic Cable –7.50m,

USB 3.2 (Gen 2x1, not backward compatible with USB 2.0) – 10Gbps data transmission. Gold plated

precision contacts. USB-A male to USB-A male, full-metal housing. Hybrid cable, bidirectional data

transfer. With EMI resistance, low attenuation, no external power supply required.

6.8 SITC of 1.5 Sq mm Speaker Cable (as per actual). Mtrs 50.00 233.00 11,650.00

6.9 SITC of 20/22 AWG Microphone/Signal Cable ( as per actual). Mtrs 10.00 214.00 2,140.00

6.10 SITC of Shielded Twisted Pair Control & Signal Cable(as per actual). Mtrs 100.00 107.00 10,700.00

6.11 SITC of Various Connectors . Lot 1.00 53,630.00 53,630.00

B GUEST DINING 0.00

Digitally signed by ARTI

SITC of 4" Ceiling speaker:

Compact Full Range 4" Ceiling Speaker with 30 W RMS power @ 8 Ohms, Frequency

1.00 Response (±3 dB) 102Hz - 20kHz, Frequency Range (-10 dB) 70 Hz - 20 kHz, Sensitivity 84 No's 6.00 31,000.00 1,86,000.00

dB, 120 degrees Coverage, Maximum SPL 99 dB Average and 105 dB Peak, Transformer

Taps @ 70 V/100V: 25 W / 12.5 W / 6.3 W, UL and EN 54-24:2008 certified.

SITC of Dual Channel 240Watts Power amplifier:

Dual Channel Commercial Class D Amplifier with Energy Star Certification delivering 2 x

2.00 120 W @ 4/8 Ohms and 70V/100V, distortion <0.05%, Frequency response 20 Hz to 20 No's 1.00 1,19,179.00 1,19,179.00

kHz, +0.5 / -1 dB, Signal-to-noise >97 dBA.

3.00 VIDEO SYSTEM 0.00

SITC of 55" Display:

55" 4K UHD(3840 X 2160) LED display, 500 Cd/m2, Android 11.0 based SOC with Quad

Core Processor, ARM Mali G51 GUP, 4GB RAM, 32GB Memory, HDMI 2.0 X 2, DP1.2

IN(Shared with USB Type C) X 1, USB 3.0 X 1, USB 2.0 X 1, RJ45 X 1, RS232 X 1, Audio Out x

1, Digital Audio Out x 1, HDMI 2.0 Out x 1, 24W in built speaker, 24/7 operation,

3.1 Wifi(Optional dongle), Bluetooth, No signal Power Off, RS232 and LAN Control, OSD and Nos. 1.00 2,14,523.00 2,14,523.00

UI rotation, USB Auto play function, Multi screen support upto 3 x 3, Multi functional USB

Type C( for Audio, Video, Network, Microphone, 65W charging, Camera connectivity),

Wireless Screen sharing with Airplay, Miracast and Mirroring, PIP/PBP support, Landscape

and Portrait mode, Instand mobile content ransfer, Multi mode play, Content scheduling

and signage software.Device management system compatible.

SITC of Set up Box:

HD/UHD Set up Box as per client requirement

Digitally signed by ARTI

SITC of 2x4 4K 18Gbps HDMI Splitter with Scaler and Audio De-Embedding.

Distributes 2 HDMI signals to up to 4 HDMI outputs.

Input connector(s): 2x HDMI

Output connector(s): 4x HDMI, 1x Analog Stereo (2x L/R RCA), 1x Digital Audio (Toslink).

HDMI Input Resolution Up to UltraHD / 4K / 2160p @60Hz, 4:4:4, 8bit.

HDMI Output Resolution Up to 4K / UltraHD / 2160p @60Hz, 4:4:4, 8bit.

3.3 Frequency Response:20Hz-20KHz Nos. 1.00 98,681.00 98,681.00

Supports HDMI 2.0 with 18Gbps for resolutions up to 4K UltraHD 60Hz.

Support resolutions up to 4K@60Hz, 4:4:4 with 18Gbps incl. HDR formats such as Dolby

Input supporting HDCP 2.2, outputs supporting HDCP active or passive mode.

Including a 4K to 1080p down-scaler and signal equalizer for longer HDMI runs.

Bandwidth 18Gbps

EDID management, 6-fold cascading.

Audio de-embedding analog stereo (L/R RCA) and digital S/PDIF (Toslink).

4 INSTALLATION EQUIPMENTS 0.00

SITC of Certified 4K Premium High Speed HDMI Cable – 1.00m,

black. HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD 60Hz. Gold plated

precision contacts . HDMI-A male to HDMI-A male. High purity, tinned OFC copper

conductors and triple shielding, AWG28.

SITE of 4K Premium High Speed HDMI AOC Fiber Optic Cable– 20.00m. HDMI version 2.0 –

18Gbps for resolutions up to 4K UltraHD 60Hz. Gold plated precision contacts with Ultra

4.2 Locking system to take a load of 6 kgs without being pulled out. HDMI-A male to HDMI-A Nos. 2.00 57,920.00 1,15,840.00

male. Hybrid cable – Fiber for AV; copper for power and data, Ø 4.5mm. Halogen-free for

low smoke emissions in case of fire.

Digitally signed by ARTI

SITE of 4K Premium High Speed HDMI AOC Fiber Optic Cable– 30.00m. HDMI version 2.0 –

18Gbps for resolutions up to 4K UltraHD 60Hz. Gold plated precision contacts with Ultra

4.3 Locking system to take a load of 6 kgs without being pulled out. HDMI-A male to HDMI-A Nos. 2.00 96,178.00 1,92,356.00

male. Hybrid cable – Fiber for AV; copper for power and data, Ø 4.5mm. Halogen-free for

low smoke emissions in case of fire.

4.4 SITC of 1.5 Sq mm Speaker Cable (as per actual). Mtrs 100.00 233.00 23,300.00

4.5 SITC of 20/22 AWG Microphone/Signal Cable ( as per actual). Mtrs 20.00 214.00 4,280.00

4.6 SITC of Shielded Twisted Pair Control & Signal Cable(as per actual). Mtrs 100.00 107.00 10,700.00

4.7 SITC of Various Connectors . Lot 1.00 14,302.00 14,302.00

Digitally signed by ARTI

“Construction of 7th floor Dining Hall at Sector -29, Power Grid Corporation of India Limited, Gurugram, Haryana.”

ODC KITCHEN ESTIMATE

S. NO. PRODUCT NAME SIZE Unit QTY RATE AMOUNT

2 THREE BURNER RANGE 1830X610X865 Nos. 1 61511.18 61,511.18

3 WORK TABLE WITH SINK 1230X610X865 Nos. 1 44735.4 44,735.40

6 DEEP FAT FRYER WITHOUT DUMP 610X610X865 Nos. 1 62909.16 62,909.16

8 COMMERCIAL INDUCTION HEATER 610X610X865 Nos. 1 32153.57 32,153.57

10 SANDWICH GRILLER 610X610X865 Nos. 1 40541.46 40,541.46

14 DISH LANDING TABLE 1525X610X865 Nos. 1 58715.22 58,715.22

17 WATER COOLER 120 LTR. Nos. 1 62909.16 62,909.16

20 WORK TABLE WITH CABINET UNDER NEATH 1060X410X865 Nos. 1 13979.81 13,979.81

21 COMMERCIAL INDUCTION HEATER 610X610X865 Nos. 1 32153.57 32,153.57

22 COFFEE GRINDER Nos. 1 124420.34 1,24,420.34

24 CONDIMENT TRAY Nos. 3 10484.86 31,454.58

25 COFFE THERMOS Nos. 1 4892.93 4,892.93

26 JUICE DISPENSER (REF.) Nos. 1 33551.55 33,551.55

27 TEA THERMOS Nos. 1 4892.93 4,892.93

28 COFFEE MACHINE Nos. 1 538222.84 5,38,222.84

Digitally signed by ARTI

31 MILK THERMOS Nos. 1 4892.93 4,892.93

32 FRESH AIR DUCTING APPROX. 360 SQFT Sqft. 360 279.6 1,00,656.00

33 EXHAUST DUCTING APPROX. 100 SQFT Sqft. 100 279.6 27,960.00

34 DUCTING GRILL STD Nos. 16 5591.93 89,470.88

35 FRESH AIR WASHER Nos. 1 314545.82 3,14,545.82

TOTAL AMOUNT 30,62,699.36

TOTAL AMOUNT 30,62,699.36

Digitally signed by ARTI