Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹19.5 L+₹1.5 L (8.39%)Rejected-Finance JAISALMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Due to high amount quoted | |
| 3 | L3₹22.1 L+₹4.1 L (23.1%)Rejected-Finance | L3 | Rejected-Finance Due to high amount quoted | |
| 4 | L4₹22.7 L+₹4.8 L (26.6%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L4 | Rejected-Finance Due to high amount quoted | |
| 5 | L5₹23.5 L+₹5.6 L (31.0%)Rejected-Finance | L5 | Rejected-Finance Due to high amount quoted |
Tender Value
₹22.1 L
EMD Value
₹44,300
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (A) Jaisalmer
HQ CWE (A) JAISALMER-345001
PROVN OF STORAGE/DELIVERY IN CERTAIN AREA AT KHETOLAI UNDER AGE (I) POKARAN
2022_MES_555869_1
84020
Open Tender
Civil Works
Item Rate
180 days
Pokaran
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
AGE (I) Pokaran
₹44,300
Yes
24 Dec 2022
4 Oct 2022
3 Nov 2022
4 Oct 2022
1 Nov 2022
18 Oct 2022
Amount
Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified & directed by Engineer-in-charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified & directed by Engineer-in-Charge
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.
Removing excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified & directed by Engineer-in-charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.
M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as directed by Engineer-in-charge.
M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified & directed by Engineer-in-Charge
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement all as specified & directed.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry wall surfaces and finished the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.
M&L for 15 mm thick, rendering in two coats first coat of 10mm thick cement mortar (1:6) and finishing coat 5mm thick in cement mortar (1:4) with using WPC on stone surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).
M&L for rendering 5 mm thick in cement mortar (1:4) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of distempering oil emulsion over a coat of primer over and including a coat of putty for wall to get a uniform smooth surfaces all as specified & directed by Engineer-in-charge.
M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling all as specified & directed by Engineer-in-charge.
M&L for finishing walls with Acrylic exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior emulsion primer applied @ 2.20 kg/10 sqm) complete all as specified & directed by Engineer-in-charge.
S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.
M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25 to 35cm wide, hoisted and set, jointed and grouted in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for 50mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) for levelling course for consolidated thickness shall be varied as per the requirements complete all as specified & directed by Engineer-in-charge.
M&L for 10mm thick screed bed on roof in CM (1:4) for relaying water proofing treatment with using WPC complete all as specified & directed by Engineer-in-charge. Note :- WPC will be measured and paid separately as supply only).
Supply only integral water proofing compound all as specified & directed by Engineer-in-charge.
M&L for water proofing treatment with 3mm thic (Actatic Poly Propylene) modified memberane reinforced with non wove polyster mat weight 150gms/Sqm) as centre core & without multiple layers of polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.3 Kg/Sqm over roof (an overlap of 100mm & 150mm shall be provided on sides & end respectively) including a coat of bitumen grade 85/25 @ 1.2 Kg/Sqm and applying one coat of aluminium paint @ 100ml/ sqm on top of APP membrane to get uniform finish complete all as specified & directed by Engineer-in-charge.
M&L 38mm wide and 3mm thick glass dividing strip complete all as specified & directed by Engineer-in-charge.
M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors & fixing of glass dividing strips & finishing the surface even & smooth with using extra cement all as specified & directed by Engineer-in-charge.
S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.
S&F, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.
S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.
S&F 150 mm size aluminium handle, cast type, anodiesed complete all as specified & directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.
S&F factory made box type steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete as shown in Drawing No. CEJZ/TD/22 Sh 1/1 to 1/3 all as specified & directed by Engineer-in-charge.
S&F, 4mm thick, sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
M&L for roughly squared stone 5cm thick as in lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length complete all as specified & directed by Engineer-in-charge.
S & F anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling alongwith Gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified & directed by Engineer-in-charge
S&F 5 cm thick sand stone slabs Jaisalmer pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.
M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-Charge
S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engineer-in-charge.
M&L for 80 mm thick, M-40 grade, machine pressed precast concrete inter locking paver block using grey cement and pigment of any shape & size confirming to IS 15658-2006 laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M&L for concelled point wiring (Flame proof) with two single core FRLS PVC unsheathed stranded copper conductor 1.5 sq mm size, 1100 V grade, and one run of same size/ specification for conteneous earthing connected to common earth dolly complete drawing in and included suitable sizes in stove enmelled steel conduit, ISI marked with all fittings and accessories fixed properly in concelled position to wall and surface on roof including sunken type pressed steel terminal boxes of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint with laminated hylem sheet ISI marked for mounting of switches, sockets etc for one light/fan point controlled by one switch complete all as specified & directed by Engineer-in-charge.
S & F switch flame proof rotary type with termination box in LM6, single pole 250 V complete all as specified & directed by Engineer-in-charge.
S & F Flame proof exhaust fan size 380 (15") single phase complete all as specified & directed by Engineer-in-charge.
M&L for making a round hole with mason for making window suitable for fixing of 380 mm flame proof exhaust fan and making good of wall complete all as specified & directed by Engineer-in-charge.
S & F LED light fitting 1x 16 W flame proof, CMRI certified recommended for gas/ vapor group of IIA & II B, zone 1& 2 and IP65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in-charge.
S&F Sheet metal enclosure DB SPN 240 Volt 8 way double door type with 200 Amps rated bus bar for fixing MCB complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts, 10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
M&L for submain wiring with PVC unsheathed cable single core stranded copper conductor 6sq mm size, 1100 V grade, drawn through PVC casing and caping (ISI marked) not less than 25mm dia on surface with and including PVC unsheathed cable single core copper conductor 6.0 Sq mm as continuous earth wire complete all as specified & directed by Engineer-in-charge.
M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'medium grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print complete all as specified & directed by Engineer-in-charge.
[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.
Supply and laying in trenches/through pipes/ducts or on poles/ walls jointing to O/H conductor, LT panels, main switch with cables size aluminium lugs and testing XLPE insulated armoured heavy duty electric cables with aluminium conductor, 1100 volt grade, all as specified directed by engineer-in-charge of cross section area 10 sqmm 2core complete all as specified & directed by Engineer-in-charge.
M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- Punned thickness of sand cushioning shall only measured).
Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.
M/s Shri Inder Construction Company
Bhawani Constructions
S K TRADER
M/s Rashid Mohammed
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .