Construction of Additional accommodation of 4No. classrooms and 1No. library Hall at Govt Senior Secondary School Kuthera Tehsil and District Hamirpur(H.P.)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm(thirty centimetre) in depth, 1.5 m(one point five metre) in width as well as 10 sqm(ten square metre) on plan) including getting out and disposal of excavated earth lead upto 50 m(fifty metre) and lift upto 1.5 m(one point five metre), as directed by Engineer-in-charge all kinds of soil including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm(forty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10( one cement : five coarse sand : ten graded stone aggregate 40mm(forty millimetre) nominal size as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm(fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm(seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing & finishing the top smooth as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm(twenty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns,etc. for mass concrete as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders,bressumers and cantilevers as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral staircases as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for :Small lintels not exceeding 1.5 m(one point five metre) clear span,moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per the direction of Engineer-in-Charge(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) all works upto plinth level including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per the direction of Engineer-in-Charge(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) all works above plinth level upto floor V level including entire carriage of material within all leads,lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (one cement : six coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level.Cement mortar 1:4 (one cement :four coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Stone soling/boulder filling dry hand packed in under floor as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm(eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm(twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels.Area of slab over 0.50 sqm(zero point five zero square metre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position 2nd class deodar wood as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm(thirty five millimetre) thick including ISI marked Stainless. Steel butt hinges with necessary screws as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) thick double glazed shutters for doors, windwos and clerestory windows using 2 number 4mm (four millimetre) thick float glass panes, including ISI marked M.S. Pressed butthinges bright finished of required size with necessary screws as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing glazing 5mm (five millimetre) thick Glass fixed in door, window ventilator shutters and partition etc with PVC/neoprens gasket etc. complete glazing with glass panes of 6mm (six millimetre) thickness as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. as per the direction of Engineer-in-Charge including entire carriage of material within all leads,lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing 40x5 mm(forty into five millimetre) flat iron hold fast 40 cm(forty centimetre) long including fixing to frame with 10 mm(ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand :six graded stone aggregate 20mm(twenty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads , lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 60mm x 75mm (sixty millimetre into seventy five millimetre) hand rails in 1st Indian teak wood straight lenght complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed torequired colour or shade, with nuts and screws etc.complete 300x16 mm(three hundred into sixteen millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. (i)250x10mm (two hundred fifty into ten millimetre only)as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

150x10mm (one hundred fifty into ten millimetre only)as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. (i)125mm (one hundred twenty five millimetre only)as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

100mm (one hundred millimetre only)as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete 150 mm(one hundred fifty millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.complete 150 mm(one hundred fifteen millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete 150 mm(one hundred fifty millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board/ cabinet shall be 8mm (eight millimetre) thick ply and all the cut portions of shelves shall be finished with 6mm (six millimetre) thick hard wood edging. The cut portion of shutters from all sides shall aslo be finished with 12mm (twelve millimetre)thick hard wood edging. The shutter from out side shall be finished with 4mm (four millimetre) thick vaneer ply of approved shade to match with panelling including stainless steel hinges and magnetic catcher with in all accessories etc complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads,lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder,railings, brackets, gates and similar worksas per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) 25 mm (twenty five millimetre)thick as per the direction of Engineer-in-Charge including entire carriage of material within all leads,lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm(twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%(zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre) thick cement mortar 1:4 (one cement : four coarsesand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete size of tile 600 x 600mm (six hundred into six hundred millimetre) as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20(twenty) microns over 5(five) microns primer coating to back coast of polyester of 5(five) microns over 5(five) microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia with prepainted limpet and rubber washer complete with all accessories as required as per specifications and as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point sixty millimetre) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (twenty) microns over 5 (five) microns primer coating +back coat or polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm (six millimetre) with all accessories as required as per direction of Engineer in charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing valley 60cm (sixty centimere) overall 0.60mm (zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia with prepainted G.I impet and bitumen washers complete with all accesories as required as per direction of Engineer in charge including entire carriage of material within all leads , lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP sheet 1.66mm (one point sixty six millimetre) to 2mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixinng and welding to steel roof members and applying a coat of red lead primer complete as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and Fixing 15 mm(fifteen millimetre) thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm(five hundred ninety five into five hundred ninety five millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120(one hundred twenty) grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm(twenty four into thirty eight millimetre) made from 0.33 mm(zero point thirty three millimetre) thick (minimum) sheet, spaced 1200 mm(one thousand two hundred millimetre) centre to centre, and cross “T” of size 24x28 mm(twenty four into twenty eight millimetre) made out of 0.33 mm(zero point thrity three millimetre) (Minimum) sheet, 1200 mm(one thousand two hundred millimetre) long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm(one thousand two hundred into six hundred millimetre) and secondary cross ‘T’ of length 600mm and size 24 x28 mm(twenty four into twenty eight millimetre) made of 0.33 mm(zero point thirty three millimetre) thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm(one thousand two hundred into six hundred millimetre) panel to from grid of size 600x600 mm(six hundred into six hundred millimetre), resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm(twenty four into twenty four into three thousand millimetre) made of 0.40 mm(zero point forty millimetre) thick (minimum) sheet with the help of rawl plugs at 450 mm(four hundred fifty millimetre) centre to centre with 25 mm(twenty five millimetre) long dry wall screws @ 230 mm(two hundred thirty millimetre) interval and laying 15 mm(fifteen millimetre) thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm(twenty five into thirty five into one point six millimetre) fixed to ceiling with 12.5 mm(tweleve point five millimetre) dia and 50 mm(fifty millimetre) long dash fasteners, 4 mm(four millimetre) G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm(eighty five into thirty into zero point eight millimetre),spaced at 1200 mm(one thousand two hundred millimetre) centre to centre along main ‘T’,bottom exposed with 24 mm (twenty four millimetre)of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

15 mm(fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix :1:4 (one cement: four fine sand)as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

6 mm(six millimetre) cement plaster to ceiling in cement mortor 1:3 (one cement : three fine sand)as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square metre)over an under coat of primer applied @0.75 ltr/10 sqm(zero point seventy five litre per ten square metre) of approved brand and manufacture as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre(fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm (one point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (zero point ninety litre per ten square metre) as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

French spirit polishing Two or more coats on new works including a coat of wood filler as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre(fifty grams per litre), of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Construction course rubble dressed "U" shape open surface drain with side wall 15 x 22 cm (fifteen into twenty two) in cement mortor 1:6 (one cement : six sand) and in side plstring with cement plaster 1:3 (one centimetre) including earth work and laying 10cm (ten centimetre) cement concrete 1:5:10(one cement: : five sand : ten graded stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand: four graded stone aggreate 20mm (twenty millimetre) nominal size and finishing with a floating coat of neat cement and curing complete as per standard design as per direction of Engineer in charge including entire carriage of material within all leads,lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm(one hundred fifty millimetre)as per direction of Engineer in charge including entire carriage of material within all leads, lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

sunny kumar chopra

SANJEEV KUMAR GOVT CONTRACTOR