Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.4 LAccepted-Finance | 1 | Accepted-Finance 1 | |
| 2 | 2₹24.8 L+₹38,116.03 (1.56%)Accepted-Finance | 2 | Accepted-Finance 2 | |
| 3 | 3₹24.9 L+₹43,518.73 (1.78%)Accepted-Finance | 3 | Accepted-Finance 3 | |
| 4 | 4₹25.3 L+₹81,337.60 (3.33%)Accepted-Finance | 4 | Accepted-Finance 4 |
Tender Value
₹27.0 L
EMD Value
₹81,030
Closing Date
19 Sept 2026, 5:00 pmClosed
Executive Engineer Jal Shakti PHE Div. Bijbehara
Executive Engineer Jal Shakti PHE Div. Bijbehara
Supply/ Installation/ Testing and Commissioning of Electro Mechanical Equipments at Water Supply Scheme Seer Ist (Kadlabal Habitation) under (UT CAPEX).
2026_PHE_324503_1
40/PHE/BIJ OF 2026-27
Open Tender
Civil Works - Water Works
Percentage
seer
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Executive Engineer Jal Shakti PHE Div. Bijbehara
₹81,030
Yes
26 Sept 2026
12 Sept 2026
21 Sept 2026
12 Sept 2026
19 Sept 2026
12 Sept 2026
12 Sept 2026 - 19 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing & Commissioning of Submersible Pumping Unit as per IS 8034 with following specification are as under:
PUMP:
Rated Discharge =3500 GPH
Rated Head = 165 meters
Overall Pumping Unit Efficiency = Not less than 50%
Speed = 2900 Rpm
Type of pumping Equipment =Vertical Submersible
MATERIAL OF CONSTRUCTION:
Impeller = Stainless Steel/Chrome Steel
Pump Shaft = Stainless Steel SS 410.
Pump Casing = Cast Iron/Stainless steel.
MOTOR:-
Method of starting = Star – Delta
Speed = 3000 (Sync).
Frequency = 50 ± 3 % Hz
Working Voltage = 415 ± 15% V, 03 phase
Rating = as per OEM/17.50HP
Efficiency = as per IS Code 9382-2013
Class of insulation = F/Suitable for above parameters
Manufactures Test Certificate to be appended | 1 | Job | 1,06,727 | ₹1,06,727 |
| 2 | Earth work in excavation by mechanical(Hydraulic Excavator) means in trenches for foundation , drains ,pipes , cables (not exceeding 1.5 m in width ) and for shafts , wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and reaming of bottom lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed. (All kinds of soil) The job includes earth work for liner with 6 mtrs deep and of required dimensions | 100 | Cum | 256.85 | ₹25,685 |
| 3 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking
excavated or stacked material :All kinds of soil : | 50 | Cum | 89.75 | ₹4,487.5 |
| 4 | Filling available excavated earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by reaming and watering , lead upto 50 m and lift upto 1.5m. | 20 | Cum | 218.4 | ₹4,368 |
| 5 | providing and laying of stone soling including manual compaction | 10 | Cum | 750 | ₹7,500 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: | - | - | - | - |
| 7 | Foundations, footings, bases of columns etc. for mass concrete. | 40 | Sqm | 286.35 | ₹11,454 |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . all work upto plinth level with 1: 2 : 4 mix ( 1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size) | 20 | Cum | 6,591.25 | ₹1,31,825 |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 10 | Cum | 7,104.35 | ₹71,043.5 |
| 10 | Fabrication, Providing and fitting of Y- junction having 1m length of each arm to be fabricated out of hot dip galvanized G.I pipe. The job also includes Providing and welding of M.S flanges to the ends of each arm. The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint by dint of DC arc welding. The job further includes Providing and Fitting of nuts and bolts (conforming to IS:1363 Part 1st) and Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. The size of the Y- junction is given below :
Size:- DN50 | 1 | Job | 4,500 | ₹4,500 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_1094598.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
BOQ_1094598.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .