GE/BAS-05/2025-26 Special repair to security wall and building No P-20 at Basoli under GE Basoli

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed.

M&L TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

S&F for Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.complete all as specified and directed.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts size 100 mm of extruded section and fixed complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified and directed

S&F aluminium alloy, anodised, sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.

M&L for Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars, cornices surface including making good uneven surface/holes and smoothening of surface with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

Preparation of new plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion paint (APEX) of Alkali & fungal resistance, dirt resistance qualities in same shade and color as approved over a coat of primer etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.

M&L for Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion (APEX) of Alkali & fungal resistance,dirt resistance qualities, after making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore in repair complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repair PVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore, complete all as specified and directed .

Supply and fixing in repair PVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) reducer 110mm bore complete all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair..complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down old complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F in repair angle valve/stop cock cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed

S & F for vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and directed

S&F in repair 15 mm bore CP jet spray for Pedestal pattern WC complete all as specified and directed

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

M&L for applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.’

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick above or below ground level. complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graged crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and drected

M&L for cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface. (sample as approved & kept in GE's sample room) complete all as specified and directed.

M&L for Vitrified tiles in dark shade 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 1mm thick wall care putty, one coat of primer and two coat oil emulsion distemper on walls complete all as specified and directed.

Taking down cement plaster on brick or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillar complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 , complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 , complete all as specified and directed

All as per item No above, but except brick , complete all as specified and directed

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.

M & L for Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4 and external pointed flush in same mortar as the work proceeds. complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid water proofing compound complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed

Supply only Liquid Water Proofing Compound. complete all as specified and directed

Taking down ,dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed.

M&L for precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 incl necessary form work. complete all as specified and directed

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of PVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and directed.

M&L in repair Steel rolling shutters,of 1mm thick lathe with out ball bearing, as specified including gear operated type with chain wheel and hand chain top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as directed, complete: push pull or manual type in complete all as specified and directed.

S&F in repair Ball bearing for rolling shutters complete all as specified and directed

M& L for Safety lever locks mild steel with 2 levers for rolling shutters complete all as specified and directed

M&L for preperation of old plastered surface of walls/roof projection/chajjas and Applying One coat of Apex emulsion paint as complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for Preparing old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc including all drilling bolting riveting etc and similar works conforming to FE 290 gde E-165 complete all as specified and directed.

S & F in repair galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured) complete all as specified and directed.

Restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (each line of wire to be measured separately) complete all as specified and directed.

S & F in repair Punched tape concentrina coil of dia of coil 1050 mm ,56 loops, 2.5 mm core wire,heavy galvanised ( wire 275 GSM),tensile strength of wire 1400-1500 N/sqmm, Streatchable length 12 mtr,weight 14.63 kg including securying or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete including taking down old concentrina coil complete all as specified and directed

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

M&L for Point wiring for one light controlled by one switch with 1.5 sqmm single core PVC insulated fan point/Exhaust for unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit with sunken box suitable for modular switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour complete all as specified and directed. Note : (a) Insulation test of point wiring (b) colour coding is to be maintained . (Ph-Red, N-Black, Half -Yellow, Earth- Green.

All as per item No 89 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 89 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

M&L for Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit with sunken box suitable for modular switches and sockets for 5 pin 15 amps socket outlet, including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour complete all as specified and directed. Note : (a) Insulation test of point wiring (b) colour coding is to be maintained (Ph-Red, N-Black, Earth- Green).

S&F in repair/replacement Modular switch one way 6A,1 Module, complete all as specified and directed .

S&F modular sockete outlet 6 amps 5 Pin Shuttered Socket , 2 module complete all as specified and directed .

S&F in repair/replacement Modular switch one way 16A,1 Module, with indicator complete all as specified and directed

S&F modular socket outlet 16 amps, 3 Pin Shuttered Socket, 2 module complete all as specified and directed

S&F modular fan step regulator,120 W two module complete all as specified directed.

S&F modular white cover plate with frame 8 modular complete all as specifed and directed.

S&F modular white cover plate with frame 6 modular complete all as specifed and directed.

S&F modular white cover plate with frame 3 modular complete all as specifed and directed.

S&F modular white cover platewith frame 1 modular complete all as specifed and directed.

S & F lamp holderbatton holder/Angle holder insulated body (metal ring) with bakelite type with back plate suitable for batten fitting complete all as specified and directed.

S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose of make : Philips ,cat part No :BN170C LED20S-6500 PSU L120/ Havells , Cat part no : LUMILINEPLUSNEOBS20WLED865SPCSSIND/Crompton , cat part no : CCS-100-20-65-HL2-DP-NWH/ Orient ,cat part no :LBLN-20-C-SQ-AL complete all as specified and directed by the Engr-in-charge.

M & L for providing/cutting the round /square hole on the wall and supply and fixing propeller type AC ventilating fans(Metalic body ) Single phase , 230 volts 300 mm sweep including grouting and fixing the ragged bolts in wall for exhaust fan and louver shutter on the exhaust side wall (outer surface of the wall) and connecting PVC insulated three core 1.5 SQMM copper cable from ceiling rose to exhaust fan motor and writing MES No with black synthetic enemel paint 2.0 cm high. Make of Exhaust fan - Havells, model no : Ventil Air DS Green /Standard, model no :Refresh air - SPS/Khaitan , model No: Eurocap complete all as specified and directed .

M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed.

S&F in replacement sheet metal powder enclosure powder coated distribution board double door,VTPN, 415 Volts, 4 way (1incomming three phase and 12 outgoing single phase) for MCCB and MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as per specified and directed and comprising of following:- a) MCCB 4 pole 100 Amps AC 415 Volts, 25 KA=01 No.(For incoming) (b) MCB SP 6-40Amps =12 Nos (For Outgoings). Note: 1 The DB shall be flush fixed and making good the disturbed surface matching with existing surface. 2 Connection of the MCCB/MCB with cable shall be made through appropriate size pin/bottle type thimble properly crimped. 3 All the vacant hole of the DB shall be provided with blank plate of appropriate size. 4 Double continous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply and fixing LED flood light 70 watts , 230 volts , 5700 k , IP-65 outdoor type Energy saving, environmental friendly, long life, die cast aluminium housing with LEDs as light source,suitable for highlighting architectural features or area lighting of make: Havells , cat part no : JETALEGANZAFLS70WLED757P60DTOTG/ Crompton: cat part no :TFS-504-70-57-60D-SL-GL-NSG/Orient , cat part No : LFSMU-070-C complete all as specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.

S&F MCB SPN 40 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.

Suppy and fixing for LED lamp 9 watt, B-22 type complete all as specified and directed.

S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire)

KAPOOR AUTOMOBILES (BID ID -3290969)

M/S SATYA SAI CONSTRUCTION (BID ID -3290514)

Standard engineers (BID ID -3290996)

satpal and brothers (BID ID -3290902)

Ms International Engineers (BID ID -3290961)

M/S V K TRADERS (BID ID -3290861)

Shiva Builders (BID ID -3290981)

M/S SHRI RAM BUILDERS (BID ID -3290772)

M/S SINGH AND ASSOCIATES (BID ID -3290895)

Ashoka Engineers (BID ID -3290898)