PROVISION OF INTERLOCKING TILES PATH AND SHED FOR CEO COMPLEX AND IMPROVEMENT TO STATION EDUCATION SECTION AT AF STN BAMRAULI

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft/loose soil as in foundation etc or for manholes, laying of cover not exc 10 Sqm on plan all as required and directed.

M&L for cement concrete type D2 (1:4:8) (40 mm graded stone aggregate) in sub base and foundations filling and mass concrete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement. (Note: WPC will be measured and paid separately).

Supply only, Water proofing compound complete

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer etc complete all as specified.

M&L mild steel tubular section as in post/column/strut etc confirming to IS standard fixed with screw on nut & welded in joints complete all as specified.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-W(Gde E-250) quality-B ) etc complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe 410-W(Gde E-250) quality-B ) etc complete all as specified and directed.

S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete as directed.

S&F 16mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n.exc 30cm long complete as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in foundations, filling and mass-concrete etc complete all as directed.

M&L for Pre-painted galvatume aluminium zinc coating 275 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Hardcore (Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L for 75mm thick cement concrete type D2 1:5:10 (40 mm graded stone aggregate) in sub base and foundations filling and mass concrete all as specified and directed.

M&L for 100 mm thick PCC type B-1 ( 20 mm graded stone aggregate) as in flooring even and smooth without using extra cement etc complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for plinth protrction etc complete all as specified.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete as directed.

Surface excavation n. exc 30 cm deep and avg 15cm deep and getting out in soft/loose soil complete all as directed.

Returning filling in, foundation / trenches including spreading, levelling, watering and well ramming in layers n exc 25 cm complete all as directed.

Removing surplus excavated soil/materials to a distance not exc 50 mtr and depositing where directed at a level n exc 1.5 mtr from the starting point complete all as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded stone aggregate) as in leveling course etc complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed tile over and inclduing 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified and directed.

Dismantling of ceiling board (fibre pulp, insulation etc) or insulation boards,slabs/blankets any thickness including cover fillet etc complete all as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

S&F in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600 module consisting of wall angle section 19x19mm and tee section with web height of 38mm and flange 15mm (colour white) (having rotary stitching on all T-section) with suspension system as shown in sketch 'B' and as approved by the GE including taking down old false ceiling complete all as specified and directed. Note : (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled/Tegular) or equivalent brand of make as specified in Appendix 'B' to particular

Demolition of brick work built in cement mortar complete all as directed.

Taking down cement plaster on brick/stone walls including rackingout joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM (1:4) finished even and smooth without using extra cement complete all as directed..

M&L for preparation of newly plastered surfaces of wall and applying two coat of distemper oil-emulsion over a coat primer including a thin layer of wall care putty etc complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distempering over a coat of primer including including a thin layer of wall care putty complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coat of weather coat paint over a coat primer including a thin layer of wall care putty etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of weather coat paint etc complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplastered of old walls and applying one coat of white wash etc complete all as specified.

Taking down chowkats or with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Takin down chowkats or with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc. 4.00 Sqm each complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old or previously untreated surfaces of wood and wood based materials of any description not otherwise described over 10cm width and girth and applying two coat of synthetic enamel paint etc complete all as specified.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosole oil complete all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening complete as per specification, drawing and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face in frame at site complete as per specification, drawing and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as directed.

S&F 150mm, long, aluminium anodised barrel tower bolt of extruded section and fixed complete all as directed.

S&F 150 mm long, aluminium handles cast type, anodised and fitted complete all as directed.

S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron).

S&F powder coating Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Aluminium (powder coated) sliding glazed shutter of suitable size with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end all as specified as shown and drawing complete as directed. Notes : (i) Frame and Glass filling in panels to windows shall be measured and paid for separately under respective item of schedule 'A'. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2

Supply only 5.50mm thick coloured Sheet glass, best quality and glazing with aluminium clips in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 9mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice laminations fixed with screws to aluminium door etc complete all as specified and directed.

S&F Stainless steel concealed door closer/over head in floor mounted best quality, suitable for door shutters of 851 to 1000 mm in width and (overall length of cover plate) 140mm etc complete all as specified.

S&F rebated mortice aluminium lock verticle type size 100mm with 4 levers complete all as specified and directed.

M&L for PCC (1:2:4) type C1 (using 20mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps;seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete as directed

Supply and fixing vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed.

Supply and fixing 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to squat pattern complete all as specified and directed.

S & F vitreous china wash hand basin, white flat/angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of brackets and 1mtr long 32 mm bore PVC waste pipe and 32mm CP waste fittings etc complete all as specified.

Supply and fixing PVC connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe all as specified and directed.

S&F pillar tap 15 mm bore, cast copper alloy, with capasten head, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as directed.

S&F 15 mm bore stop valve ISI marked, cast copper alloy, screwed down, high pressure,CP fancy type handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP 15 mm dia bib tap cast copper alloy with fancy type handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing water tanks complete all as specified and directed.

S&F in repair 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified.

S&F in repair 20mm dia ball valves high pressure of with epxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair chromium plated fancy type Hand Jet spray (Health faucet) complete all as specified and directed. Make:Jaquar Cat part ALD- 577 or Eqvt in CERA

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 20mm dia medium grade galvanized water tubing with all necessary fittings and fixed on walls complete all as specified and directed.

S&F 15mm dia medium grade galvanized water tubing with all necessary fittings and fixed on walls complete all as specified and directed..

Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

S&F 110mm PVC (SWR) vent cowl complete all as directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as directed.

S&F 110mm PVC (SWR) bends any radius complete all as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

Supply & fix in repair stainless steel decorative type drapery rod finnial, end socket etc Make of drapery rod shall be of VISTA model No. Victorian series finial SW-13 or CLASSIC complete all as directed. . Note:- (i) Brackets shall be measured and paid seperately under respective item of this schedule. (ii) Drapery rod, finnial shall be of same makes.

Supply only Decorative bracket fency type suitable for drapery rod catered under item 7.25 above.

M&L for 50mm thick sand cushion below interlocking paving tiles including spreading, levelling and compaction complete all as specified.

M&L for Machine cut pressed precast concrete interlocking colour paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade laid over sand etc complete all as specified and directed.

S&F pre-cast kerb stone of size 300x450x100mm with PCC (1:2:4) (using 20mm graded stone aggregate) including champhered, rounded etc. complete all as specified and directed. Make : NTC/Ultra/JAIN tile Industries.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing holdfast and coping including all necessary form work complete all as specified and directed.

S&F for 200mm dia reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed type C2 1:3:6 using (40mm graded stone aggregate) to drain pipes of 200mm bore dia including packing under and completely surrounding pipes with concrete after they are laid and tested etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed

Removing of excavated material out side MD land and depositing where directed all as directed.

M&L for obtaining approved earth (stabilized soil) from out side defence land to a distance exc 4 KM but n.exc 5 KM and bring out to side and deposited for embarkment /filling of creaters complete all as specified and directed. (Note : Digging pit of obtaining earth is deemed to be inlcuded in quote rate)

Supply and laying in trenches of XLPE Insulated galvanised steel strip armoured electric power cables(heavy duty)1100 volts grade withstranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Supply and laying river bed sand for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed .

Supply and laying old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

S&F Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 12 ways, 415 volts Note :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule.

S&F Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, Note : MCBs shall be measured and paid for separately under respective item of this schedule.

S&F MCCB, four pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity fixed in DBs complete.

S&F MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series fixed in DBs complete.

S&F MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs complete.

S&F MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs complete.

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as directed. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M & L for point wiring with 1.5 sqmm (Nominal Area) FR-LS PVC insulated sheathed multi stranded copper conductor, 1100 Volts grade through PVC conduit medium duty (ISI Marked) concealed with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting Modular type switches, sockets, fan regulators etc top cover (ISI marked) including continuous earth wire FR-LS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for the following : Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained.The rate included for suitable sunken metal flush boxes, cover plates, blank plates etc for placing modular fittings etc

(a) For one light point/ fan/exhaust point controlled by one switch

(b) For one three pin socket outlet on independant board

(c) One three pin socket outlet on same board

M & L for point wiring with 4.0 sqmm (Nominal Area) FR-LS PVC insulated sheathed multi stranded copper conductor, 1100 Volts grade for 3 Pin socket outlet 15 Amps on independent board through MS conduit medium duty (ISI Marked) concealed with accessories such as elbow, tees,internal & external bend etc. of suitable size including MS pressed steel cadmium plated terminal box of 1.6 mm thick for mounting switch socket combination and 3 mm thick ISI marked laminated sheet top cover including continuous earth wire FR-LS PVC insulated 4.0 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified. : Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained.The rate included for suitable sunken metal flush boxes, cover plates, blank plates etc for placing modular fittings etc

Supply and fix modular switch 6Amps, 1 module complete all as specified and directed.

Supply and fix modular switch 16Amps, 1 module complete all as specified and directed.

Supply and fix modular socket outlet 6Amps, 2 module complete all as specified and directed.

Supply and fix modular socket out 16Amps, 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm Three terminals, 240 V grade complete all as specified and as directed.

Supply and Fix calling bell AC ding dong 220 volt multi music on wooden board complete all as specified and directed.

Supply and fix bell push button modular type AC 220 volt single phase complete all as specified and directed.

Supply and fixing in replacement of existing defective energy efficient tube light fitting of 20/18/14 Watt with LED fitting of 10 watt 2 feet long integral sleek extruded aluminium LED channel with white acrylic cover wall mounted type complete all as specified and as directed Make : Philips cat no BN021 LED10S-6500 PSU GR S1/Havells, Model : LHEWEBP7IN1W01Crompton cat No LCCLB08-CDL complete all as directed including the taking down old u/s one and depositing the same in MES store yard checking of serviceability by Engr-in-Charge.

Supply and fixing in replacement of existing defective energy efficient tube light fitting of 36/40/28 Watt with LED fitting of 21 watt 4 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type complete all as specified and as directed Make : Philips cat no BN021C LED20S PSU CDL GR /Havells, Cat No HEWEBP7IN1W020/Crompton cat no LCCLB20-CDL complete all as directed including the taking down old u/s one and depositing the same in MES store yard checking of serviceability by Engr-in-Charge.

Supply and fix 2x2 feet size 36 watt 240 volt 50 Htz LED luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as directed. Make: Bajaj cat part No- BCTBLL 36W LED or Philips cat part No-RC380BLED36S - 6500 or equivalent in Havells/CG

Supply and fix bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt complete all as directed. Make : Havells cat part No- Rugby Neon 10WLED760SSYMBOPC or equivalent of other make Bajaj/Crompton

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 25 Amp 10 KA SPN MCB, one 25 Amp sockets and one 32 Amp plug top prewired complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F Fresh air fan, AC, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated mulstistranded copper conductor FRLS cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as directed. Note :- Fan shall be of Make- Havells Cat part No Ventil Air DX or equivalent model of make as specified in Appendix B to particular specifications.

S&F Wall mounted fan, 450 mm sweep, AC, single phase, 230/240 Volts, fixing on wall all as required and connecting with 3 run of 1.5 sqm single core PVC insulated mulstistranded copper conductor cable from ceiling rose all as directed. Note :- Fan shall be make : Havells, model 'V3' or equivalent model of make specified in Appendix 'B' to particular specifications.

Supply and erecting ceiling fan 1200mm sweep with all standard accessories and necessary materials, erected in provided hook/clamp. Material : ceiling fan : electric Ceiling fan capacity type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackeles, reel insulator, half threaded bolts of 9.53mm (3/8") dia 62.5 mm (2-1/2") to 88mm (3-1/2") long and 7.94 mm (5/16") dia 44.5 mm (1-3/4) to 57 mm (2-1/4") long with nuts, with lock type split pin spring & plate washers etc, three number blade made of Aluminium alloy suitable for single phase, AC 210 volts, 50 Hz supply and conforming to class I to IS : 374/1979 with amendment no 1 to 6 expect for performance parameters to the extent modified as details in general requirements > the down rod shall be capable to withstand a tensile load of 1000 kg without break down and a torsion load of 500 kgcm without breakage as per clause 10.14.1 of IS : 374/1979 with amendment no 1 to 6 Eletrical motor should be single phase permanent capacitor type with no. of pole 12/14/16/18(as per sweep). Class-1 wih basic insulation. class of insulation shall be B class. The binding wire used for fan should be copper wire, synthetic enameled of 30 to 38 SWG. Connection wire : Flat/round two core flexible stranded copper wire cord 23/0.2 mm ISI marked. Paint superior quality enamel paint of specified colour for marked Sr . No and date of erection of 1200mm sweep, maximum input power 50 watts air delivery 215 cubic meter per minute complete all as directed. Make USHA/CROMPTON GREAVES/HAVELLS/BAJAJ/ORIENT.

Supply and laying in trenches of XLPE Insulated galvanised steel strip armoured electric power cables(heavy duty)1100 volts grade withstranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed.

S&F Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, verticle type suitable for mounting isolator fixing MCB's confirming to IS : 13032, IS8623, BS 5484 with 200 Amps rating copper bus bar, SPN 4 way, 240 volts complete as directed. Note: MCBs shall be measured and paid for seperately under respective items of this schedule).

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

HIMANSHU TRADERS

FRIENDS N FRIENDS

M/S KESHRI WORKERS

oasis contractor builder and supplier

Mohit Enterprises

M/S SWASTIK BUILDERS

M/S SATISH KUMAR

R K CONSTRUCTION COMPANY