GE (N) P/TOKEN- 08 OF 2022-2023SPL REPAIRS TO ROOF, CEILING, FLOORING AND MISC B/R ITEMS AT 6B, 6QG AND CERTAIN MW WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per serial item No.1.00 here-in-before but except tiles.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets exceeding 15cmc/c complete all as specified and as directed.

Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as specified and as directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work complete all as specified and as directed.

M&L Fibre board Eves/Weather Boarding 18 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete approved arch pattern any size and shape all as specified and as directed.Make: Shera wall/Everest

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as specified and as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275gms/ Sqm complete all as specified and as directed.

All as per serial item No.8.00 here-in-before but except sheeting.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 25mm bore including taking down old unserviceable valve complete all as specified and as directed.

Material and labour for cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cenment mortar (1:3) complete all as specified and as directed.

Dismantling of wooden boarding any description and in any position complete all as specified and as directed.

Material and labour for false ceiling with 10mm thick 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer including dismantling of existing ceiling of any description and any thickness including grid etc complete all as specified and as directed.NOTE: pop ceiling to be made in two /three tier design)

M&L for POP decorative cornices/moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed.

Factory made 100 % solid wood polymer composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed.. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for complete removal of existing treatment on walls/ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.

Preparation of surfaces by applying wall care putty 1 to 1.5 mm thick on walls /ceiling surface, filling cracks by crack filler and smoothen the surfaces with using sand paper etc complete all as specified and as directed.

M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on wall surfaces etc complete all as specified and as directed.

Preparation of old surface of wall/ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) complete all as specified and as directed.

M&L for preparation of old plaster/ unplaster surface and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) roof/ wall /floor etc, over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with two coats of creosote all as specified and as directed.

M&L for preparation of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed.

Dismantling floor, paver block/ chequred tiles hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

Material and labour for double charge coloured vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for double charged vitrified ceremic tiles Dark shade 10 mm thick (square/rectangular) polished, area of each tile exc. 0.42 sqm not exceeding 1 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 600mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for 10mm thick wall cladding tiles n exc 0.18 sqm in size over 10mm thick plastering in CM 1:6 all as specified and as directed. Make- RAK, Jhonshon or equivalent.

M&L 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and directed.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps straight or round in shape , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete etc complete all as specified and as directed.

M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc all as specifed and directed

Demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in mass concrete / foundation / sub base all as specified and directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable (Corrugated, Semi corrugated etc.) sheets all as specified and as directed.

M&L for precast rubber moulded cement concrete glazed interlocking tiles,paver block, any shape and size as approved , 80mm thick, conforming to IS 15658-2006, M-40 grade in floor/pavement laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample all as specified and as directed.

Dismantling of stone slabs,cudappah, paver block, chequered tiles of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of structural steel work of any description all as specified and as directed.

S&F mild steel rolled section as in main cross beams purlins, rafters, frame and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

S & F of mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240,as in main cross beams and running rails fixed independently with angle iron cleats or connecting pieces complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as specified and directed.

M&L 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site all as specified and as directed.

Supply and fix in repair for polycarbonate fibre glass reinforced translucent corrugated sheeting 6.00 mm thick hollow section fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Surface excavation in soft / loose soil not exceeding 30 cm deep and average 15 cm and getting out etc as specified and directed by Engr-in Charge.

M&L Hardcore of broken stone of guage nexc. 63 mm deposited spread and levelled in layers nexc. 15 cm thk watered and rammed to true surface as specified and directed by Engr-in-charge

M&L 75 mm thick plain cement concrete (1:4:8), type B-2 (using 40 mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and as directed.

M&L for Precast cement concrete mix 1:3:6 type C-1 cusing 20 mm graded stone aggregate solid block masonry exc 10cm in width and set in CM(1:6) Mix 1:3:6 , Type C-1 all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls Complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/storage almirah/ wall panelling to the size and pattern complete all as shown on drawing and all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/storage almirah/ wall panelling to the size and pattern complete all as shown on drawing and all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/storage almirah/ wall panelling to the size and pattern complete all as shown on drawing and all as specified and as directed.

Material and labour in repair for 4mm thick one side decorative group match veneer plywood and application of resin pigment and hardener to desired colour and pattern and applying two or more coats of melamine polish with spray guns, compressor etc till the desired glossy surface is obtained complete all as specified and all as specified and as directed.

Material and labour for 0.90mm thick white laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

M&L for cast iron designer grill as per sample kept in GE office or as directed by GE complete all as specified and as directed

Supply and fix for mild steel work Fe 410-W (Gde E-250 quality) in tubular trusses as in grill, grating work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 2062 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix for 100mm size brass handles decorative type extruded, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba

Supply and fix for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed. Make- Godrej/ Cuba

S&F External teak wood lipping 6 mm thick for 18/19 mm thick block board or veneered particle board fixed with nails all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Supply and fix for 75mm long 20mm flap width size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix for 150mm size brass handles decorative type extruded, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba

Supply and fix for 450mm size sliding channel, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba

Supply and fix for 600mm size sliding channel, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba

S&F in repair white table top Basin of size 450mm x 300mm x 105 mm fixed in position including fixing of tap, waste pipe etc complete all as specified and as directed Make: hindware Model Kathy mini Cat Part No – 91059 or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs for vitreous china counter sunk wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fitting including waste pipe, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap or 'S' trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

S&F Auto hinges, stainless steel, bright finish or electrogalvanised 30mm width of flaps all as specified and as directed

S&F, Magnetic catches of brass body and striking plate in complete all as specified and as directed. Make- Godrej/ Cuba

Dismantling of Post of any size and any discription including demolition of concrete of any garde and rubbishing off from premises all as directed

Excavation in post holes (or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in hard/ dense soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level)

M&L for RCC (1:2:4) Type B1 using 20mm graded aggregate (nominal mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span

Mild steel 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets/galvalumesheet/fibre sheet in roof coverings complete all as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated Mangalore Tile Pattern steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete (Corrugated, Semi corrugated etc.) sheets all as specified and as directed. Note- The Shed to be made in rectangular hut shaped)

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

M&L for precast rubber moulded cement concrete glazed interlocking tiles,paver block, any shape and size as approved , 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

Supply and fix for 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified anda as directed.

Material and labour for coloured, parking tiles of size 300mm x 300mm x 8 to10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. Make: RAK/ Johnson Endura or equivalent of Kajaria/ Somani as approved by GE.

Material and labour for providing 50mm thick RCC Jali Designer (measured solid) as in louvers and jallies, including all mouldings, set in cement mortar (1:4) including dismantling existing complete all as specified and as directed.

M&L for SS Railing of silver coating for staircase, passage and any other location mortice hole left in concrete shall be grouted in CM (1:2) or fixing with fasterners and furnished to match with adjoining surfaces of concrete/wall, garde of steel shall be SS- 304 and of 16 gauge thick, pattern all as specified and as directed.

Dismantling Chain link MS galvanised fencing of any type and any discription all as directed

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps straight or round in shape , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rainwater gutter system of SWR pipe 180mm nominal dia. Half round type alongwith all accessories/ fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and as dircted. Make- Prince Model HPR18R or equivalent of Infra, supreme, Kisan, Astron Plastic, Amogh Plast, Finolex

M&L for rainwater gutter system of SWR pipe 250mm nominal dia. Half round type alongwith all accessories/ fittings complete all as specified and as dircted. Make- Prince Model HPR18R or equivalent of Infra, supreme, Kisan, Astron Plastic, Amogh Plast, Finolex

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls, including all fittings,heads, shoes, bends, swan-necks, etc., overall as fixed along along the centre line over fittings and accessories)

M&L for PVC (SWR) bends of any radius with oval and access door of 110 mm dia

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 4 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No 4 above but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for Modular switch one way 6 A, 1 module complete all as specified.

S & F for Modular switch one way 16 A, 1 module, with neon indicator complete all as specified.

S & F for Modular socket, 6A - 2/3 pin combined 2 module complete all as specified.

S & F for Modular socket, 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F for modular Bell push modular 6 Amps single module complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for recess mounted 2' x 2' square LED panel 36 watts, 600 x 600mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed.

S & F for LED down light recess mounted luminare, square type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 10 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed. Note:- four runs of 10 sqmm cable, two runs of 10 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit.

Supply and fix Rigid non-metallic PVC conduit of size 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc.

Supply and fix Rigid non-metallic PVC conduit of size 40mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc.

Taking down existing LED 2x2 safely in store and refixing the same after completion of grid ceiling all as specified and directed by Engineer-in-Charge.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sai Construction

K.S.JITE AND SONS

M/s Akshay Contruction

L.T Associate

SAGAR ENTERPRISES

Pratap enterprises

M/S Eknath agencies

THE SAIRAM CONSTRUCTIONS