NIT No. 17 (21-22) Item No. 11

Dismantling of existing open well submersible dewatering 5 HP pump set, pipe, flange, bend etc.

Supply of open well Submersible Pump Set 5 HP, 3 Ph, 2900 rpm, discharge 60 cubic Mtr/ hr. at 15 Mtr head suitable for mixed water application. Make: - Kirloskar/ M&P/BS Pump/Lubi Pump/ Any DJB Approved make.

Supply of CI double flange non rising spindle sluice valve size 80 mm dia. IS 14846 PN 1.0 Make: - Kirloskar/IVC/ Any DJB Approved make. DJB SOR Item Code: 4.7.4

Supply of CI double flange non rising swing type swing check NRV IS 5312 Part-I, PN 1.0 80 mm dia. Make: - Kirloskar/IVC/ Any DJB Approved make. DJB SOR Item Code: 4.9.4

Supply of 80 mm diameter medium (B class) GI pipe. Make: - Jindal Hisar/ Jindal Star/Tata/ISI Mark

Supply of Slipon flange 80 mm diameter internally threaded. ISI Mark

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Supply of Nut, Bolt and Washer of good quality

Supply of Neoprene rubber sheet 50% Neoprene. Make: - Jyoti/ Any DJB Approved make. DJB SOR Item Code: 22.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6(1 Cement: 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size). DJB SOR Item Code: 46.1.5

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade of size 3 X 10 Sq. mm. DSR (E&M)- 2018, Item No. 9.1.7

Providing of electrical insulating mats confirming to IS 15652/2006 of size 1-meter x 2-meter, 3mm thickness for electrical purposes. Make; - Jyoti/Any DJB Approved make. DJB SOR Item Code: 22.5.3

Providing/fixing of water storage tank of capacity 500 Litre at Sonia Vihar BPS with pipe fittings and 40mm gun metal gate valves with the help of manual labour, tool & tackles. Make -water storage tank: -Sheetal/ Supreme/Aquapure/Any DJB approved. Make - pipe fittings: - ISI mark.

Installation, erecting, laying of pipe, testing, and commissioning of the above said pumps, dewatering fitting of valves, necessary reinforcement and nut bolts, rubber gasket, vibration isolation arrangement, loading, unloading, cartage, dismantling of existing system, lifting the same and taking out at floor level, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.

JMD ASSOCIATES

Raj Engineering Co.