REPAIR AND PAINTING TO STEEL FURNITURE AND REPAIR TO CHARPOY G.I PIPE AND BED HARD UNDER GE RANCHI

Amount

Removing the broken seat and replacing it with new seat woven with 2mm wide plastic cane of make:- Primier /Shah & Shah/B R Super brand as per Godrej pattern to be fixed with 04 Nos machine nuts and bolts of size 85 x 4 mm with washer to Chair CB Steel with arm/ without arm, frame of seat shall be made of best quality 2nd class seasoned hard wood ,free from knots and infection all as specified and shown on drg and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier. (FD-75(M).

All as per Srl item No. 1 here-in-before but back of Chair CB Steel with arm/without arm.(FD-75(M).

Supply and fixing in replacement of flat iron cleat made of 50 x 25 x 3mm under the seat of chair CB steel with/without arm with electric welding all as directed by Engr-in-Charge. (FD-75(M).

Supply and fixing in replacement of arm to chair CB steel with arms of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of wood primer and as per directed by Engr-in-Charge. (FD-75(M).

Supply and fixing in replacement of unserviceable seat plank of form without back with new one of size 1525 x 255 x 18mm thick made of MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet both side of make:- Greenlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to seat including nuts, bolts & rubber shoes leg frame of Form without back all as specified and shown on drg. (FD-77(M) & FD-1027)

All as per item No. 5 here-in-before but size 1900 x 255 x 18mm. (FD-77(M) & FD-1027)

All as per item No. 5 here-in-before but seat plank of form with back of size 1800 x 255 x 18mm. (FD-78(M).

All as per item No. 5 here-in-before but back plank of form with back of 1800 x 150 x 18mm.(FD-78(M).

Supply and fixing in replacement of unserviceable portions of form with or without back with 25mm square conduit pipe of wall thickness 1.6mm of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe complete all as directed by Engr-in-Charge. (FD-77(M), FD-78(M) &FD-1027)

Supply and fixing in replacement of top of table 900 x 600 x 760mm with/ without drawers steel with new one made of 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table all as shown on drg and as directed by Engineer -in-Charge. (FD-1007 & FD-1008)

All as per Srl. item No. 10 but Table 900x900x760mm Steel. (FD-1009)

Supply and fixing in replacement of legs and stiffeners of table 900 x 600 x 760mm with/without drawers steel with new legs made of 25mm square conduit pipe 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe complete size and shape all as shown on drg and directed by Engr-in-Charge. (FD-1007 & FD-1008)

Supply and fixing new H type stiffener for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark shall be welded all around pipe to support the legs of the table at appropirate height approx 100mm high from the bottom of legs all as directed by Engineer-in-Charge. (FD-1009)

Supply and fixing in replacement of drawers of table 900 x 600 x 760mm with drawers made out of 0.9mm thick MS/CRCA sheet of make:- SAIL/JINDAL/TATA with drawer lock of make:- Lico/Reena or equivalent of size and shape all as specified and shown on drg including lock with duplicate keys. (FD-1008)

Supply and fixing in replacement of lock of table 900 x 600 x 760mm with drawers with duplicate key for four leaver size and shape all as specified and shown on drg. (Make of Lock:- Lico/Reena or equivalent) (FD-1008).

Supply and fixing in replacement of hasp and staple mild steel chromium plated 75mm long of Locker bed side Steel all as shown on drg and directed by Engr-in-Charge. (FD-257 & 1029 )

Supply and fixing in replacement of mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod of locker bed side steel all as specified and shown on drg. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement of mild steel chromium plated handles 125mm long 'C' type of locker bed side steel and shown on drg. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement of hanging rod 19mm dia 0.9mm wall thickness conduit pipe of stainless Steel of length 380mm approx all as specified and shown on drg of Locker bed side Steel. (FD-FD-257, 1029 and SKD-567)

Supply and fixing in replacement of door shutter of locker bed side steel made of 0.9mm wall thickness M.S/CRCA sheet of make:- TATA/JINDAL/SAIL of bend to shape and size as per shown on drg complete and as directed by Engr-in-Charge. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement of legs of locker bed side steel made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL sheet of bend to shape as per shown on drg complete and as directed by Engr-in-charge. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement of 75mm long MS hinges to door shutter of locker bed side steel including revetting of all loose doors all as directed by Engr-in-Charge. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement bottom (Base) of locker bed side steel made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL sheet bend to shape as per shown on drg and as directed by Engr-in-Charge. (FD-257, 1029 and SKD-567)

Supply and fixing in replacement drawers of locker bed side steel of Drg No:- SKD-567 made out of 0.9mm thick MS/CRCA sheet of make:- TATA/JINDAL/SAIL sheet size and shape all as specified and shown on drg and directed by Engr-in-Charge. (SKD-567)

Supply and fixing in replacement of top of table office clerk steel with new top made of 18/19mm thick MR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of size 1220 x 730mm all as shown on drg and directed by Engr-in-Charge. (FD-381 & 1004)

All as per item No 25 here-in-before but top of table office officer of size 1830 x 915mm. (FD-1002)

Replacement of unserviceable drawers of table office officer/clerk steel with new drawers made out of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL /SAIL with locking arrangement shape and size all as per shown on drg and directed by Engr-in-Charge. (FD-381, 1002, 1003 & FD-1004).

Replacement of unserviceable cabinet/box only of outer side of drawer of table office officer/clerk steel with new drawers made out of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL with locking arrangements shape and size as per shown on drg and as per directed by Engr-in-Charge. (FD-381, 1002, 1003 & FD-1004).

Supply and fixing in replacement of lock with new MS lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (Make of Lock:- Lico/Reena or equivalent) (FD-381, 1002, 1003 & FD-1004).

Supply and fixing in replacement of legs of almirah large/medium steel with new legs made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer. (FD-1031 & 1032)

Supply and fixing in replacement of lock of Almirah large/medium steel with new MS lock 4 lever of approved best quality with duplicate key for almirah Large/ medium steel all as directed by Engr-in-Charge. (Make of Lock:- Lico/Reena) (FD-1031 & FD-1032).

All as per item No 31 here-in-before but handle mild steel CP 125mm long S Type as per sample kept in Furniture yard for almirah large/medium steel all as directed and shown on drg. (FD-1031 & FD-1032).

Supply and fixing in replacement of shelf of almirah large/medium steel, made of M.S/CRCA sheet of make:- TATA/JINDAL/SAIL of 0.9mm thick bend to shape and size as shown on drg. (FD-1031 & FD-1032).

Supply and fixing in replacement of unserviceable locking device with new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect doors with stay hook/revetting all as directed by Engr-in-Charge. (FD-1032).

All as per Srl. Item No. 34 here-in-before but almirah large Steel. (FD-1031).

Supply and fixing in replacement of door shutter of almirah medium steel, made of M.S/CRCA sheet of make:- TATA/JINDAL/SAIL of 0.9mm thick bend to shape and size as shown on drg and directed by Engr-in-Charge. (FD-1032).

All as per Srl. Item No. 36 here-in-before but almirah large Steel.(FD-1031).

Supply and fixing in replacement of top of table dinning ORs with new top made of 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table dining Ors all as per drg and specified. (FD-165(M).

Supply and fixing in replacement of legs & stiffners of table dinning ORs with new made of 25mm square conduit pipe of wall thickness 1.6mm of make:- Appolo / Nizon or ISI mark duly electric welding all around of pipe all as specified and shown on drg and directed by Engr-in-Charge. (FD-165(M).

Supply and fixing in replacement of top of teapoy verandah with 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/Fixin pasted with probond adhesive /necessary glue alround to top of Teapoy Verandah all as specified and shown on drg. (FD-255)

Supply and fixing in replacement of legs frame U Type of teapoy verandah with 19mm dia MS round pipe 1.6mm wall thickness of make:- Appolo/Nizon ISI mark all as specified and shown on drg. (FD-255).

Supply and fixing in replacement of seat of chair revolving made of 75mm thick cushioned 32 density covered with new tapestory cloth as per sample of existing chair complete all as directed by Engr-in-Charge. (FD-TP)

All as per Srl item No. 42 here-in-before but back of chair revolving. (FD-TP)

Supply and fixing in replacement of hydraulic system of chair revolving complete all as directed by Engr-in-Charge. (FD-TP)

Supply and fixing in replacement of arms of chair revolving all as directed by Engr-in-Charge. (FD-TP)

Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving complete all as directed by Engineer-in-Charge. (FD-TP)

Supply and fixing in replacement of seat of Chair Easy Steel made of 12mm thick plywood MR Gde and 50mm thick cushion of 32 density pasted on plywood and covered with leatherite fabrics/ tapestry cloth all as shown on drg and directed by Engr-in-Charge. (FD-121 (M).

All as per Srl. Item No. 47 but back of Chair Easy Steel. (FD-121(M)

Supply and fixing in replacement of arm to chair easy steel of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of wood primer and as per directed by Engr-in-Charge. (FD-121(M).

Supply and fixing in replacement of top of Table bed side steel of Drg No:- FD- 157(M) with with new top made of 18/19mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top all as shown on drg and directed by Engineer -in-Charge. (FD-157(M)

Dismantling & re-assembling/tightening of all members/parts of charpoy G.I. Pipe carefully including removing of any type newar / nylon newar/plywood from charpoy and segregate the serviceable and unserviceable parts and stacking of serviceable parts complete as per directed by Engr-in-Charge. (FD-220) (Note:- Unserviceable spares will be measured and paid separately)

Supply and fixing new long rail of G.I tubing 32mm bore medium grade duly threaded both ends all as specified and shown on drg as directed by Engr-in-Charge. (Make:-Jindal/TATA/Prakash(Surya)/ Bansal (FD-220)

Labour only short rails as made out from the unserviceable long rail parts under item No. 52 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed by Engr-in-Charge. (FD-220)

Labour only leg as made out from the unserviceable short rail under item no 52 above including cutting and threading at one end and fixed in position complete as per drg and directed by Engr-in-Charge.(FD-220)

Supply and fixing only G.I elbow three way of size 32mm bore ISI mark in replacement of unserviceable elbow of Charpoy G.I Pipe (FD-220).

Supply and fixing only G.I check nut of size 6mm thick 32mm bore ISI mark in replacement of unserviceable check nut of Charpoy G.I Pipe (FD-220).

Supply and fixing in replacement of old unserviceable wooden blocks/ MS Sheet/cleat with new one made of 2nd class hard wood to legs of charpoy G.I Pipe all as per directed by Engr-in-Charge. (FD-220)

Supply and fixing the ply wood 12mm thick BWR Gde, AA Type as per IS:303 on top, suitable for G.I Charpoy as shown in drg of approximate size of 1980x900mm with mild steel galvanised iron nuts and bolts of size 70mmx6mm with G.I Washer. (Nos of nuts and bolts to be used is 11 Nos) including one stiffener of length 825mm approx made out of G.I tubing 20mm bore medium grade will be welded under the Plywood top as approved by Engr-in-Charge. (Make of plywood :- Centuryply/ Greenply/BTSP(Gold)/Samratply and Make of G.I Pipe:- Jindal/TATA/ Prakash(Surya)/Bansal(FD-220)

Removing the unserviceable plywood of Charpoy G.I Pie with plywood top and supply and fixing in replacement of plywood only of size 1980x900mmx12mm thick BWR Gde, AA Type with old plywood of charpoy G.I as per IS:303 all as directed by Engr-in-Charge. (Make of plywood :- Centuryply/ Greenply/BTSP(Gold)/Samratply. (FD-220)

Supply and fixing in replacement of plywood BWR Gde as per IS:303 of size 1980 x 900mm of Make of plywood :- Centuryply/ Greenply/ BTSP(Gold)/Samratply with necessary steel screw to top of Charpoy I.P with Hard Top and all as shown on drg. (FD/MAP-II/01)

Supply and fixing in replacement of PVC shoes to legs of Charpoy I.P with hard Top all as per shown on drg and directed by Engr-in-Charge. (FD/MAP-II/01)

Supply and fixing in replacement of plywood BWR Gde as per IS:303 of size 1980 x 900mm of Make:- Archidply/Greenply/Centuryply with necessary steel screw to top of Bed Hard MAP and all as shown on drg. (FD/E6/MAP/08(R)

Supply and fixing in replacement of Head board of Bed Hard MAP made of 18mm thick prelaminated MDF Board both side laminated exterior gde, Type-I with 0.8mm thick PVC edge bending Tape of make:- REHAU/Fixin pasting with probond synthetic adhesive/ glue alround as per shown on drg and directed by Engr-in-charge. (Make of MDF Board:- Ashish/Action Tesa/Century/ Greenply)

All as per Srl. Item No:- 63 here-in-before but foot board of Bed Hard MAP. (FD/E6/MAP/08(R)

Supply and fixing in replacement of PVC shoes to legs of Bed Hard MAP all as per shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/08(R)

Material and labour for painting to frame of chair CB Steel with arms/without arms with synthetic enamel olive green paint including preparation of surface with rubbing with emery paper and providing 02 Nos PVC cap at top of seat frame of MS pipe and 04 Nos PVC shoes/toes with steel screw at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. (FD-75(M).

M & L for spray painting to frame of form w/o back except seat planks with synthetic enamel paint including providing rubber shoes to legs of Form without back of all as specified and as directed by Engr-in-Charge. (FD-77(M) & FD-1027).

All as per item No 67 here-in-before but form with back. (FD-78(M).

M & L for spray painting to frame of Table 900x600x760mm with/without drawers steel with synthetic enamel mettalic paint and providing rubber shoes to legs of table all as specified and as directed by Engr-in-Charge. (FD-1007 & 1008)

All as per item No 69 here-in-before but Table 900x900x760mm Steel. (FD-1009).

Spray painting to Locker bed side Steel with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint from paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required or rebitted the shelf or welded the shelf with electric welding complete all as specified and directed by Engineer-in-Charge. (FD-257)

All as per item No. 71 but Locker bed side steel of drg No:- SKD-567

Spray painting to Almirah Medium Steel with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge. (FD-1032)

All as per Srl. Item No. 73 here-in-before but Almirah Large Steel complete all as specified on drg and as directed by Engineer-in-Charge. (FD-1031).

Spray painting to table office clerk steel except top with synthetic enamel metallic paint internaly and externaly portion, after removing denting & dust, preparation of surfaces by providing putty and red oxide primer where required complete and providing 04 Nos rubber shoes ot table all as specified and directed by Engineer-in-Charge. (FD-381 & 1004)

All as per Srl item 75 here-in-before but table office officer. (FD-1002 & 1003)

All as per Srl. Item No. 75 here-in-before but table dining Ors including providing of 04 Nos. rubber shoes to legs of table dining Ors. (FD-165(M).

All as per Srl. Item No. 75 here-in-before but Teapoy verandah with white paint including providing of 04 Nos. rubber shoes to legs of teapoy verandah. (FD-255)

All as per Srl. Item No. 75 here-in-before but Chair Easy Steel with mettalic paint including providing of 04 Nos. rubber shoes to legs of Chair Easy Steel. (FD-121 (M)

All as per Srl. Item No. 75 here-in-before but Table bed side steel with white paint including providing of 04 Nos. rubber shoes to legs of Table bed side steel. (FD-157(M).

Material and labour for painting to frame of Bed Hard MAP with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe as specified and directed by Engineer-in-Charge. (FD/E6/MAP/08(R).

All as per Srl. Item No. 81 here-in-before but Charpoy I.P with hard top MAP. (FD/MAP-II/01)

M/S SHIV KUMAR PATHAK

ASSOCIATED BUILDCON LLP