Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹37.2 L |
Tender Value
₹64.1 L
EMD Value
₹1.3 L
Closing Date
7 Apr 2026, 5:00 pmClosed
RANA CHANDRA KAMAL
PROJECT DIRECTOR
Work Division, Patna
RANA CHANDRA KAMAL
PROJECT DIRECTOR
Repair, maintenance, servicing, shifting and operation of pump during monsoon 2026 of drainage pumping station (1) Congress Maidan, (2) NCC Maidan and (3) Bakari Mandi in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, Patna .
128511
03/Mech/PC/2026-27, Gr01
Open Tender
MECHANICAL
Patna
• Company Name
• Address
• Contact No. & E-Mail
• Registration Details
MECHANICAL
ITEM RATE
L1
1
13 documents required · 13 mandatory
₹11,800
Processing Fee: 590
₹1.3 L
Chief General Manager, BUIDCo, Patna
23 May 2026
1 Apr 2026
8 Apr 2026
2 Apr 2026
7 Apr 2026
2 Apr 2026
4 Apr 2026
NIT No.-03/Mech/PC/2026-27 Gr01
Name of Work:-Repair, maintenance, servicing, shifting and operation of pump during monsoon 2026 of drainge pumping station (1) Congress Maidan, (2) NCC Maidan and (3) Bakari Mandi in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, patna .
Estimated Cost (Rs.) Rs. 64,13,615.00
Earnest Money (Rs.) Rs. 1,28,300.00
Time of initial inspection & testing of thorough repaired all machineries. 30th May 2026
Cost of BOQ (Rs.) Rs. 11,800.00
To be filled by the Bidder
1 Name of the Contractor/Bidder
2 Address of the Contractor/Bidder
Gr-01 (1) Name of Work:- Repair, maintenance servicing and operation of pump during monsoon 2026 of drainge pumping station Congress Maidan , in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, Patna .
Sl. No. Particulars of work Qty. Unit Rate Amount (in Rs.)
1 Trolley mounted pump and motor - 60 HP having Q=195 lps, H=12 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure - 1) 1 Job 0.00 0.00
2 FASD starter of 95 amp for 60 HP CF TM pump ( As per Annexure - 1A ) 1 Job 0.00 0.00
3 TM diesel engine - 83 HP (As Per Annexure - 2) 1 Job 0.00 0.00
4 TM diesel engine pump - 83 HP having Q=300 lps, H=9 m & 5 HP Vacuum pump (As Per Annexture - 3) 1 Job 0.00 0.00
5 Commissioning & testing of Electric/Diesel TM pump, complete in all respect as per Instruction of E/I . 2 Job 0.00
6 Complete the below mention mix work as per instruction of E/I
a P & I of name plate of Buidco. (If required). 1 Job 0.00
b Writing the name details of officers & pump operator, sweeper on the wall paint. 1 Job 0.00
c Providing log book & other required Register. 4 Job 0.00
d Providing & availability during monsoon period in sufficient qty required safety materials like first aid box kit, machinery work hand tool kit, electrical glooves, (ISI) normal hand gloves, torch (02 no.), umbrella (02), safety jacket, gun boot, rain coat & other required as per instruction of E/I. 1 Job 0.00
7 Operation & maintenance of the electro-machineries for monsoon period (01.06.2026 to 31.03.2027) the bidder shall be totally responsible for the operation of minor and major work of DPS i.e burning of motor, transformer, panel, starter, bearing gate valve /Shaft replacing, etc. no further claim will be paid by Buidco. 2 Pump 0.00
8 Deployment of 06 (2X3shift) nos. per day road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 01.06.2026 to 15.10.2026 as per Direction of E/I. 822 staff 0.00
9 Deployment of 06 (2X3shift) nos. per day shift wise manpower for pump operation & Electricity work during the monsoon period 01.06.2026 to 15.10.2026 as per direction of E/I. 822 staff 0.00
Estimated cost for year 2026-27. 0.00
Name of work - Repairing and servicing of 60(E) HP CF TM pump and motor
Sl. Particulars Qty Unit Rate Amount
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 60 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane. 1 job 0.00
2 Cost for complete opening of 60 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00
4 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00
5 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00
6 Cost for providing all labours, tools and tackles at trolly for fitting of 60 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00
7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00
8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
9 Cost for making, supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 73 mm ID X 97 mm OD X 150 mm long. 1 no. 0.00
10 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
11 Cost for supply and fitting of Spherical Roller bearing no. 3313 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
12 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
14 Cost for supplying and fitting of mechanical seal, oil seal, water deflector, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
17 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
18 providing all labours, tools, tackles for installation of 60 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00
20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 6 nos 0.00
21 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
22 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
23 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
24 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
25 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
26 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
27 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
28 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
29 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
30 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00
31 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
32 Deduct : Cost of Scrap materials of bronze 3 Kg 0.00
Total cost 0.00
Name of work - Repairing of 60 HP FASD air break Starter cum control panel for operation of 60 HP C/F motor (TM) .
SI.No Particular Qty Unit Rate Amount
1 Providing all Labours,tool & tackles for repairing of 60 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 95 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Push Button 2 no. 0.00
C.T Coil 200/5 3 no. 0.00
Single phase preventer 1 no. 0.00
Ammeter (0-150) amp 1 no. 0.00
Voltmeter(0-500)Volt 1 no. 0.00
selector switch 16 Amp 2 no. 0.00
Phase indicating lamp 3 no. 0.00
2 Supply and laying of 3.5 X 70 mm sq armoured aluminium if required. 100 mtr 0.00
Name of Work : - Servicing of 83 HP diesel engine and its accessories of TM
Sl. No Particulars Qty Unit Rate Amount(Rs)
1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 83 HP diesel engine of Kirloskar make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00
2 Cost for supplying and fitting/filling following :-
Air filter 1 no. 0.00
Diesel filter 1 set 0.00
Lubricating oil filter 2 no. 0.00
Mobile 10 lit 0.00
Set of flexibles 1 set 0.00
Fuel off solenoid switch 12V DC for fuel pump 1 no. 0.00
Relay in electrical panel 2 no. 0.00
Set of sealings 1 set 0.00
Rocker cover joints 3 no. 0.00
Coolant 10 ltr 0.00
3 Cost for Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust, silencer including all labour, tools and tackles. 1 job. 0.00
4 Cost for Radiator cleaning and repairing of radiator fines externally,radiator tube internally, including all labour, tools and tackles. 1 job. 0.00
5 S/F battery 150 AH after deduction of old battery reputed make. 1 no. 0.00
6 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00
7 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00
8 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00
Total Cost 0.00
Name of work - Repairing and servicing of Trollry mounted 83(D) HP CF pump & 5 HP vacuum pump
Sl. Particulars Qty unit Rate Amount(Rs)
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 83 HP CF pump opening all bolts and nuts of pump casing, bearing houshing and taking out of bearing houshing together with impeller coupling and pump shaft. 1 job 0.00
2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from fondation on trolley including all labour, tools & tackles etc. 1 job 0.00
3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 65 mm ID X 89 mm OD X 175 mm 1 no. 0.00
5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 83 HP pump with GST,CP & labour cess etc 1 nos 0.00
6 Cost for supply and fitting of Spherical Roller bearing no. SKF 3314 A equivalent for 83 HP pump with GST, CP & labour cess etc 1 nos 0.00
7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
12 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
13 providing all labours, tools, tackles for installation of 83 HP C/F pump on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. 4 Kg 0.00
15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles. 10 nos 0.00
16 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
17 Cost for providing all labour, tools and tackles at site for opening of 5 HP vacuum pump , foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
18 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
19 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
20 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
21 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
22 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
23 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
24 Cost for providing all labour, tools and tackles for reinstallation of v/ pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
25 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
26 Deduct : Cost of Scrap materials bronze. 2 Kg 0.00
Gr-01 (2) Name of Work- Annual repair, maintenance , servicing and operation of pump after monsoon of TMP drainge pumping station NCC Maidan in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, Patna .
Sl. No. Particulars of work Qty. Unit Rate Amount (in Rs.)
1 Trolley mounted pump and motor - 60 HP having Q=195 lps, H=12 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure - 1) 1 Job 0.00 0.00
2 FASD starter of 95 amp for 60 HP CF TM pump (As per Annexure -1A) 1 Job 0.00 0.00
3 TM diesel engine - 83 HP (As Per Annexure - 2) 1 Job 0.00 0.00
4 TM diesel engine pump - 83 HP having Q=300 lps, H=9 m & 5 HP Vacuum pump (As Per Annexture - 3) 1 Job 0.00 0.00
5 Commissioning & testing of Electric/Diesel TM pump, complete in all respect as per Instruction of E/I . 2 Job 0.00
6 Complete the below mention mix work as per instruction of E/I
a P & I of name plate of Buidco. (If required). 1 Job 0.00
b Writing the name details of officers & pump operator, on the wall paint. 1 Job 0.00
c Providing log book & other required Register. 4 Job 0.00
d Providing &availability during monsoon period in sufficient qty required safety materials like first aid box kit, machinery work hand tool kit, electrical glooves, DISCHARGE ROD (ISI) normal hand gloves, torch (02 no.), umbrella (02), safety jacket, gun boot, rain coat & other required as per instruction of E/I. 1 Job 0.00
7 Operation & maintenance of the electro-machineries for monsoon period (01.06.2026 to 31.03.2027) the bidder shall be totally responsible for the operation of minor and major work of DPS i.e burning of motor, transformer, panel, starter, bearing/Shaft replacing, etc. no further claim will be paid by Buidco. 2 Pump 0.00
8 Deployment of 03 (1X3shift) nos. per day road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 01.06.2026 to 15.10.2027 and before monsoon (01st April 2026 to 31st May 2026) & after monsoon upto 3st March 2027 01 sweepar per day as per Direction of E/I. 639 staff 0.00
9 Deployment of 06 (2X3shift) nos. per day shift wise manpower for pump operation & Electricity work during the monsoon period 01.06.2026 to 15.10.2026 and before monsoon (01st April 2026 to 31st May 2026) & after monsoon upto 31st March 2027 1 x 2 nos operater per day for rest period as per direction of E/I. 1278 staff 0.00
Estimated cost for year 2026-27. 0.00
Name of work - Repairing and servicing of 60(E) HP CF TM pump and motor
Sl. Particulars Qty Unit Rate Amount
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 60 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane. 1 job 0.00
2 Cost for complete opening of 60 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00
4 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00
5 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00
6 Cost for providing all labours, tools and tackles at trolly for fitting of 60 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00
7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00
8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
9 Cost for making, supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 73 mm ID X 97 mm OD X 150 mm long. 1 no. 0.00
10 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
11 Cost for supply and fitting of Spherical Roller bearing no. 3313 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
12 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
14 Cost for supplying and fitting of mechanical seal, oil seal,, water deflector, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
17 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
18 providing all labours, tools, tackles for installation of 60 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00
20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 6 nos 0.00
21 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
22 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
23 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
24 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
25 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
26 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
27 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
28 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
29 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
30 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00
31 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
32 Deduct : Cost of Scrap materials of bronze 3 Kg 0.00
Total cost 0.00
Name of work - Repairing of 60 HP FASD air break Starter cum control panel for operation of 60 HP C/F motor (TM) .
SI.No Particular Qty Unit Rate Amount
1 Providing all Labours,tool & tackles for repairing of 60 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 95 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Push Button 2 no. 0.00
C.T Coil 200/5 3 no. 0.00
Single phase preventer 1 no. 0.00
Ammeter (0-150) amp 1 no. 0.00
Voltmeter(0-500)Volt 1 no. 0.00
selector switch 16 Amp 2 no. 0.00
Phase indicating lamp 3 no. 0.00
2 Supply and laying of 3.5 X 70 mm sq armoured aluminium if required. 40 mtr 0.00
Name of Work : - Servicing of 83 HP diesel engine and its accessories of TM
Sl. No Particulars Qty Unit Rate Amount(Rs)
1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 83 HP diesel engine of Kirloskar make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00
2 Cost for supplying and fitting/filling following :-
Air filter 1 no. 0.00
Diesel filter 1 set 0.00
Lubricating oil filter 2 no. 0.00
Mobile 10 lit 0.00
Set of flexibles 1 set 0.00
Fuel off solenoid switch 12V DC for fuel pump 1 no. 0.00
Relay in electrical panel 2 no. 0.00
Set of sealings 1 set 0.00
Rocker cover joints 3 no. 0.00
Coolant 10 ltr 0.00
3 Cost for Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust, silencer including all labour, tools and tackles. 1 job. 0.00
4 Cost for Radiator cleaning and repairing of radiator fines externally,radiator tube internally, including all labour, tools and tackles. 1 job. 0.00
5 S/F battery 150 AH after deduction of old battery reputed make. 1 no. 0.00
6 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00
7 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00
8 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00
Total Cost 0.00
Name of work - Repairing and servicing of Trollry mounted 83(D) HP CF pump & 5 HP vacuum pump
Sl. Particulars Qty unit Rate Amount(Rs)
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 83 HP CF pump opening all bolts and nuts of pump casing, bearing houshing and taking out of bearing houshing together with impeller coupling and pump shaft. 1 job 0.00
2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from fondation on trolley including all labour, tools & tackles etc. 1 job 0.00
3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 65 mm ID X 89 mm OD X 175 mm 1 no. 0.00
5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 83 HP pump with GST,CP & labour cess etc 1 nos 0.00
6 Cost for supply and fitting of Spherical Roller bearing no. SKF 3314 A equivalent for 83 HP pump with GST, CP & labour cess etc 1 nos 0.00
7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
9 Cost for supplying and fitting of mechanical seal, oil seal, water deflector, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
12 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
13 providing all labours, tools, tackles for installation of 83 HP C/F pump on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. 4 Kg 0.00
15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles. 10 nos 0.00
16 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
17 Cost for providing all labour, tools and tackles at site for opening of 5 HP vacuum pump , foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
18 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
19 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
20 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
21 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
22 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
23 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
24 Cost for providing all labour, tools and tackles for reinstallation of v/ pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
25 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
26 Deduct : Cost of Scrap materials bronze. 2 Kg 0.00
Gr-01 (3) Name of Work- Annual repair, maintenance, servicing and operation of pump before monsoon 2026 of drainge pumping station Bakri Mandi , in Bankipur Anchal, under South Bihar, Works Division (Mech), Buidco, Patna .
SI.No. Description Of Work Qty Unit Rate (RS.) Amount (RS.)
1 Repairing and servicing of Trolley mounted pump and motor - 60 HP having Q=195 lps, H=12 m running at 440v, 50hz & 5 HP vacuum pump (As per Annexure - 1) 1 Job 0.00 0.00
2 Repairing and servicing of FASD starter of 95 amp for 60 HP CF TM pump ( As per Annexure - 1A ) 1 Job 0.00 0.00
3 Repairing and servicing of TM diesel engine - 83 HP (As Per Annexure - 2) 1 Job 0.00 0.00
4 Repairing and servicing of TM diesel engine pump - 83 HP having Q=300 lps, H=9 m & 5 HP Vacuum pump (As Per Annexture - 3) 1 Job 0.00 0.00
5 Commissioning & testing of Electric/Diesel TM pump, complete in all respect as per Instruction of E/I . 2 Job 0.00
6 Complete the below mention mix work as per instruction of E/I
a P & I of name plate of Buidco. (If required). 1 Job 0.00
b Writing the name details of officers & pump operator on the wall paint. 1 Job 0.00
c Providing log book & other required Register. 4 Job 0.00
d Providing & availability during monsoon period in sufficient qty required safety materials like first aid box kit, machinery work hand tool kit, electrical glooves, DISCHARGE ROD (ISI) normal hand gloves, torch (02 no.), umbrella (02), safety jacket, gun boot, rain coat & other required as per instruction of E/I. 1 Job 0.00
7 Operation & maintenance of the electro-machineries for monsoon period (01.06.2026 to 31.03.2027) the bidder shall be totally responsible for the operation of minor and major work of DPS i.e burning of motor, transformer, panel, starter, bearing, gate valve/Shaft replacing, etc. no further claim will be paid by Buidco. 2 Pump 0.00
8 Deployment of 03 (1X3shift) nos. per day road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 01.06.2026 to 15.10.2026 and before monsoon (01st April 2026 to 31st May 2026) & after monsoon 01 upto March 2027 sweepar per day as per Direction of E/I. 639 staff 0.00
9 Deployment of 06 (2X3 shift) nos. per day shift wise manpower for pump operation & Electricity work during the monsoon period 01.06.2026 to 15.10.2026 and before monsoon (01st April 2026 to 31st May 2026) & after monsoon upto 31st March 2027 1 x 2 nos operater per day for rest period as per direction of E/I. 1278 staff 0.00
Estimated cost for year 2026-27. 0.00
Name of work - Repairing and servicing of 60(E) HP CF TM pump and motor
Sl. Particulars Qty Unit Rate Amount
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 60 HP CF pump and motor of motor and opening all nut and bolt of pump casing and from foundation base, taking down motor from its base by top lifting of motor and stacking the motor at proper place including hydra/crane. 1 job 0.00
2 Cost for complete opening of 60 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00
4 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00
5 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00
6 Cost for providing all labours, tools and tackles at trolly for fitting of 60 HP C/F motor on foundation base and refitting nut bolts & testing also. 1 nos 0.00
7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00
8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
9 Cost for making, supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 73 mm ID X 97 mm OD X 150 mm long. 1 no. 0.00
10 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
11 Cost for supply and fitting of Spherical Roller bearing no. 3313 A or equivalent for 60 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
12 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
14 Cost for supplying and fitting of mechanical seal, oil seal, water deflector, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
17 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
18 providing all labours, tools, tackles for installation of 60 HP C/F pump and motor on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 4 Kg 0.00
20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 6 nos 0.00
21 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
22 Cost for providing all labour, tools and tackles at site for opening electrical connection of 5 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
23 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
24 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
25 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
26 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
27 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
28 Cost for reassembling of v/pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
29 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
30 Cost for cutting and removing burnt cable sockets and doing cable socketing of 4 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00
31 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
32 Deduct : Cost of Scrap materials of bronze 3 Kg 0.00
Total cost 0.00
Name of work - Repairing of 60 HP FASD air break Starter cum control panel for operation of 60 HP C/F motor (TM) .
SI.No Particular Qty Unit Rate Amount
1 Providing all Labours,tool & tackles for repairing of 60 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 95 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Push Button 2 no. 0.00
C.T Coil 200/5 3 no. 0.00
Single phase preventer 1 no. 0.00
Ammeter (0-150) amp 1 no. 0.00
Voltmeter(0-500)Volt 1 no. 0.00
selector switch 16 Amp 2 no. 0.00
Phase indicating lamp 3 no. 0.00
2 Supply and laying of 3.5 X 70 mm sq armoured aluminium if required. 120 mtr 0.00
Name of Work : - Servicing of 83 HP diesel engine and its accessories of TM
Sl. No Particulars Qty Unit Rate Amount(Rs)
1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 83 HP diesel engine of Kirloskar make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00
2 Cost for supplying and fitting/filling following :-
Air filter 1 no. 0.00
Diesel filter 1 set 0.00
Lubricating oil filter 2 no. 0.00
Mobile 10 lit 0.00
Set of flexibles 1 set 0.00
Fuel off solenoid switch 12V DC for fuel pump 1 no. 0.00
Relay in electrical panel 2 no. 0.00
Set of sealings 1 set 0.00
Rocker cover joints 3 no. 0.00
Coolant 10 ltr 0.00
3 Cost for Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust, silencer including all labour, tools and tackles. 1 job. 0.00
4 Cost for Radiator cleaning and repairing of radiator fines externally,radiator tube internally, including all labour, tools and tackles. 1 job. 0.00
5 S/F battery 150 AH after deduction of old battery reputed make. 1 no. 0.00
6 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00
7 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00
8 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00
Total Cost 0.00
Name of work - Repairing and servicing of Trollry mounted 83(D) HP CF pump & 5 HP vacuum pump
Sl. Particulars Qty unit Rate Amount(Rs)
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 83 HP CF pump opening all bolts and nuts of pump casing, bearing houshing and taking out of bearing houshing together with impeller coupling and pump shaft. 1 job 0.00
2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from fondation on trolley including all labour, tools & tackles etc. 1 job 0.00
3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 65 mm ID X 89 mm OD X 175 mm 1 no. 0.00
5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3213 A or equivalent for 83 HP pump with GST,CP & labour cess etc 1 nos 0.00
6 Cost for supply and fitting of Spherical Roller bearing no. SKF 3314 A equivalent for 83 HP pump with GST, CP & labour cess etc 1 nos 0.00
7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00
8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
9 Cost for supplying and fitting of mechanical seal, oil seal, water deflector, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
12 Cost for supplying all labours, tools & tackles at site for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
13 providing all labours, tools, tackles for installation of 83 HP C/F pump on foundation,refitting nut-bolt & testing on unload. 1 job. 0.00
14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. 4 Kg 0.00
15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles. 10 nos 0.00
16 Cost for transportation of pump and its accessories from store yard to firm workshop and back to store yard . 2 job 0.00
17 Cost for providing all labour, tools and tackles at site for opening of 5 HP vacuum pump , foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00
18 Cost for dismantling of 5 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00
19 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00
20 Cost for supplying and fitting ball bearing no. 6306ZZ of SKF if required.. 1 nos. 0.00
21 Cost for supplying and fitting oil seal as per sample. 1 nos. 0.00
22 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00
23 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00
24 Cost for providing all labour, tools and tackles for reinstallation of v/ pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00
25 Cost for supplying star rubber coupling and fitting of coupling as per direction of E/I 3 nos. 0.00
26 Deduct : Cost of Scrap materials bronze. 2 Kg 0.00
Sl. No. Abstract Amount
Gr01 (1) Repair, maintenance servicing and operation of pump during monsoon 2026 of drainge pumping station Congress Maidan , in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, Patna . 0.00
Gr01 (2) Annual repair, maintenance , servicing and operation of pump after monsoon of TMP drainge pumping station NCC Maidan in Bankipur Anchal, under South ,Bihar, Works Division(Mech), Buidco, Patna . 0.00
Gr01 (3) Annual repair, maintenance, servicing and operation of pump before monsoon 2026 of drainge pumping station Bakri Mandi , in Bankipur Anchal, under South Bihar, Works Division (Mech), Buidco, Patna . 0.00
Project Director (Mech)
Patna Central (Mech) (Works Division)
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT03.pdf
NIT • 2.79 MB
NIT03.pdf
NIT • 2.79 MB
FINANCIALBID01.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .