Construction Of Anganwadi Building at Girnoli Kamatpada V.P.Girnoli Tal. and Dist. Palghar.

Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed.

Excavation for foundation in Hard murum including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed.

Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and casting in situ cement concrete M-20 of trap metal for R.C.C.. work like raft, grillage, strip, foundations and footing of R.C.C. Columns and steel stanchions, including bailing out water manually, centering, formwork, compacting, finishing and curing etc. complete. (Excluding steel reinforcement)

Providing and casting in situ cement concrete M-20 of trap metal for R.C.C. columns as per detailed designs and drawings or As directed by Engineer-In-Charge., including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement)

Providing and casting in situ cement concrete M-20 of trap metal for R.C.C. Beams and Lintels as per detailed drawings and designs or as directed by Engineer-In-Charge., including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement.)

Providing and casting in situ cement concrete M-20 of trap metal for R.C.C. chhajja as per detailed designs and drawings, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete

Providing and fixing in position TMT bar reinforcement of TATA TISCOn/SAIL/JSW/ESSAR or Equivalent make (confirming to IS code) of various diameters for R.C.C.Pile caps,Footings,foundations,salbs,beams,columns,canopies,staircase,newels,chajja

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing Second Class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete.

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete

Filling in plinth and floors with approved excavated materials in 15cm to 20cm layers including watering and compaction etc. complete.

Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick.

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete.

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforcement Jali 50mm thick of approved design cement mortar 1:3 and curing complete (including 6mm diameter mild steel bar reinforcement). Spec. No.: Bd. F. 20 Page No. 100

Providing and fixing mild steel grill work for windows, ventilators weighing 15.00 kg per Sq.M. as per drawing, including necessary fixtures, welding and painting with one coat of anti-corrosive paint etc. complete.

Providing internal cement plaster 12mm thick in a single coat, in CM 1:5 with neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing etc. complete.

Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1:4 without neeru finish to Brick masonry surface in all positions including scaffolding, racking out joints, providing groove at joints of stone masonry and concrete members and curing etc. complete.

Providing and Laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed 1:4 cement mortar including cement float filling joint

Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortarof approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with s

Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width

Providing and applying two coat of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete.

Providing and applying washable oil bound distemper of approved colour, shade and quality to old/new surface, in two coats incl. scaffolding, preparing the surfaces etc. complete.

Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and qualitycolour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete.

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.excavation, laying, refilling the trench testing etc. complete.

Providing and fixing Orissa type White glazed first class(of IS Std.) earthenware 580 x 410 mm water closet pan including "P" trap, Cast Iron soil and vent pipes upto the outside face of the wall including 100 mm. diameter cast iron plug bend, cement concrete bedding.

Providing soak pit of size 120 x 120 x 120 cm including excavating and filling with brick bats. charcoal as per drawing etc. complete.

Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete

Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Please Enable Macros to View BoQ information