REPAIRS/REPLACEMENT TO BRICK/STONE WORK, OUTDOOR TILING, FLOOR PAINTING AND MISC B/R WORKS ETC IN CERTAIN BLDGS OF MD ACCN ARMY AREA UDAIPUR MIL STN

Amount

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and Labour for 15mm thick rendering on external surfaces of almirah/cupboard of brick work, concrete surfaces or stone walls upto double storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).

Material & Labour for rendering on ceiling of wall 10mm thick in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed

Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar or concete work including all quoins, arches, pillars etc complete all as specified and directed.

Material & Labour for brick work with sub class ‘ B’ Bricks straight or curved on plan exec 6 mtr mean radius with CM 1: 6

Demolition of cement concrete (reinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

Material and labour mild steel TMT bars 10 mm dia and over in main bars and stirrups, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (nomonal mix) M-15, using 20mm graded stone aggregate as in cooking platform, counter WHB etc with and including necsaary form work complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed.

Material & Labour for Non-skid jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material & Labour for Vitrified digital double charge light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with cement mortar and pointed in white or coloured cement to match over and with including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour for Vitrified digital double charge light coloured tiles 8-9 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with cement mortar and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Material & Labour for light coloured Glazed ceramic tiles in vertical surfaces size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.

Material & Labour for 15-18 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting polishing, half round moulding and cutting of holes for gas pipe complete.

Material & Labour for 18 mm thick south black Granite (Jet/Telephonic black) slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing, half round moulding and cutting of holes for gas pipe complete.

Material and labour for machine cut Kota stone slab 18-22 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. (Make: Jaquar Queen's Series, CAT No. QQT-7037)

Supply & Fixing in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge. Make: Jaquar Essco/Cera/Coronet

Supply & Fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make: Jaquar Queen's Series, CAT No. QQT-7169B)

Supply & Fixing in repair Brass CP bath Mixer with provision for overhead shower suitable 15mm bore of pipe and fixed. (Make: Jaquar Queen's Series, CAT No. QQT-7273UPR)

Supply & Fixing in repair Brass CP bath Mixer with Telephonic shower arrangement suitable 15mm bore of pipe and fixed. (Make: Jaquar Queen's Series, CAT No. QQT-7217)

Supply & Fixing in repair Brass CP bath Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe and fixed. (Make: Jaquar, CAT No. ORP-10118PM)

Supply & Fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. (Make: Jaquar Queen's Series, CAT No. QQT-7053)

Supply & Fixing in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Cera/Coronet

Supply & Fixing in repair chromium plated shower rose 190mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make: Jaquar, CAT No. OHS-497N)

Supply & Fixing CP jet spray with flexible tube etc complete all as specified & directed. Make: Jaquar Essco/Cera/Coronet

Supply & Fixing health faucet (hand shower) (ABS body) 80mm round shape with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. (Make: Jaquar, CAT No. HSH-1929)

Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge. (Make: Coronet/Jaquar Essco /Cera)

Supply & Fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified.(Make: Jaquar, CAT No. ACN-1131N)

Supply & Fixing in repair brass chromium plated Tumbler holder fixed with CP screws etc complete all as specified.(Make: Jaquar, CAT No. ACN-1141N)

Supply & Fixing in repair brass chromium plated Soap dispenser with glass bottles etc complete all as specified.(Make: Jaquar, CAT No. ACN-1135N)

Supply & Fixing in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. (Make: Coronet/Jaquar Essco/Cera)

Supply & Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. (Make:Coronet/Cera/plumber)

Supply & Fixing Corner glass shelf with bracket and glass complete set etc. (Make: Jaquar, CAT No. ACN-1173)

Supply & Fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (Make: Parryware/Jaquar Essco/Cera/Hindware)

Supply & Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 all as specified.

Supply & Fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge. Make : Parryware/Hindware/Jaquar Essco)

Supply & Fixing in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed. (Make:Parryware/Hindware/Jaquar Essco/Prayag)

Supply & Fixing repair plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge. (Make:Parryware/Hindware/Jaquar Essco/Prayag)

Supply & Fixing vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed. (Make:Parryware/Hindware/Jaquar Essco/Prayag)

Supply & Fixing vitreous china wash basin white counter below oval type size 510 mm x 410 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed. (Make -Jaquar Essco, Brand-Aspire, CAT No: ECS-WHT-703 or Eq.)

Supply & Fixing for double Coat hook/Robe hook of brass chromium plated body fixed to wooden plugs with screws and cup washers fixed in repairs. (Make: Jaquar, CAT No. ACN-1161N)

Supply & Fixing in repair waste fitting size 40 mm suitable for stainless steel kitchen sink complete all as specified and directed by Engr-in-charge.

Supply & Fixing PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc. complete all as specified and directed.(Make-Prayag/Symet/Polytuff)

Material & Labour 18/19mm thick Ultra Voilet Coated panels exterior grade, suitable for kitchen cupboards and warderobe fixed with screw to timber frame work including taking down complete all as specified and directed.(Make : Action TESA or Equivalent)

Material & Labour 18/19mm thick block board ,grade 2 quality interior grade, commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.

Material & Labour Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's i complete all as specified and directed.

Supply & Fixing in repair continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.

Supply & fixing in repair 150 mm long stainless steel handle fixed with nut and screws to cupboard shutter complete all as specified and directed.

Supply & Fixing in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of aluminium, bright finished

Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified

Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)

Supply & Fixing in repair stainless steel kitchen rack, basket Trolley grill type or perforated type or wire type or other any type of approved make all as spd.

Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc ( Make : Hettich/Haffle/KEA)

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of purpose made brackets suitable for double rod trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/steel frame.

Supply & Fixing PVC floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement type B1 (1:2:4).

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down Shutter not exc 1 sqm each

Taking down Shutter exc. 1 sqm and not exc . 2 sqm each

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified.

Supply and fixing providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) -Door Farme 90mm x 45 mm (Moulded) Single Rebated made from Wood Polymet Compositge (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after appliying PVC solvent cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI/ECHON or EQ." an ISO 9001 - 2015 Certified Company, having good screq holding capcity (Screw Withdrawal srength of (Min, 990 N) Minimum Compressie Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catgegory with property of being termite / borer proof, water / Moisture Proof & Fire retandant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Chage, Material test certificate and authentication should be compulsory provided by the manufacturing company.

Supply & Fixing PVC factory made shutter solid, PVC moulded prelam sheet both side front and back plain or coloured shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.

Supply & Fixing 150mm long aluminium anodised handle cast type and fixed

Supply & Fixing 100mm long Brass handle cast type polished bright and fixed

Supply & Fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

Supply & Fixing 200mm long brass tower bolt with cast barrel etc and fixed

Supply & Fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed..

Supply & Fixing alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

Supply & Fixing brass , cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 250 mm long complete all as specified.

Supply & Fixing double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

Taking down existing aluminium shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete.Note : Aluminium parts will be measured and paid separately.

Supply & Fixing Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified.

Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete.

Supply & Fixing for 3mm thick plain Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site ofm work as directed by the Engr-in-Charge.

Material & Labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified.

Material and labour for 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20 mm thick in CM 1:6 complete all as specified and directed.

Material & Labour for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 . (Make-H & R Johnson, Brand-Endura digital designer series or equivalent)

Material & Labour for one coat synthetic enamel painting on old painted road side kerb stone in alternate way such as yellow and black colour or as per direction of Engr-in-charge. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)

Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supply & Fixing 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.

Supplying and laying of 15 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.

Material & Labour for pure white marble tiles in a quarter circle shape of 20 cm radius and 15-18 mm thick machine cut prepolished embedded in kitchen & bathroom wall as shelf etc. laid over cement screed 15 mm in CM 1:6 laid and jointed in white/coloured cement.

Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Supply & Fixed for 100 mm bore cast iron spun pipe in any length including jointing with cement joint fixed to wall complete all as specified.

Supply & Fixed for 75 mm bore cast iron spun pipe in any length including jointing with lead joint on wall/flooring complete all as specified.

Supply & Fixed cast iron spun Bends (any radius) size 100mm bore complete all as specified.

Supply & Fixed cast iron spun Bends (any radius) size 75 mm bore complete all as specified.

Supply & Fixed branch pieces cast iron spun single (equal or unequal) 100mm bore complete all as specified.

Supply & Fixed branch pieces cast iron spun double (equal or unequal) 100mm bore complete all as specified.

Supply & Fixed branch pieces cast iron spun single (equal or unequal) 75 mm bore complete all as specified.

Supply & Fixed branch pieces cast iron spun double (equal or unequal) 75 mm bore complete all as specified.

Supply & Fixed cast iron spun cowls size 100mm bore complete all as specified.

Supply & Fixed cast iron spun cowls size 75 mm bore complete all as specified.

Supplying & laying 03 coats of reinforced acrylic coating as on sunken floor applied @1.5 Ltr/Sqm in 03 coats to achieve total 1mm thickness in any position including cleaning surface of sunken slab with wire brush/mechanical brush and with water thoroughly to remove all dust/dirt and loose particles to expose base concrete/sunken slab etc including repairing of loose/defective joints and applying 15mm thick plaster in CM 1:3 to level the surface and treatment to be applied all as per manufacturers instructions, complete all as specified and directed.

Dismantling of PVC (SWR) drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Material & Labour for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

Material & Labour for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

Supply & Fixing PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

Supply & Fixing PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

Supply & Fixing PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

Supply & Fixing PVC (SWR) vent cowl for 110 mm bore pipe

Supply & Fixing PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement

Supply & Fixing in repair sinks with drainage board made of stainless steel 1.00 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm .(Make-Nirali/Diamond/Parryware)

Material & Labour repearing and making good of out side portion of window such as jambs, cill and head portion of windows and chajjas area between 0.5 sqm to 1 sqm at FF of bldg with rendering 15mm thick on stone masonry / brick surfaces as in CM (1:4) with and including liquid water proofing compound surfaces finished even & smooth (without using extra lime or cement) including taking down cement or cement lime plaster, any description etc. and and applying two coat of cement base paint complete all as specified.

Material & Labour for complete removal of existing treatment of walls, roof projection, fins and fascia etc. with wire brush or any manul other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed.

Material & Labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Material & Labour for Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper white or tinted complete all as specified and directed. Note : (Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)

Material & Labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) or old decorated surfaces complete all as specified and directed. (Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)

Preparation of old treated surfaces (plastered or unplastered) of wall cornices etc upto tripple storey bldgs by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots old treated plastered surfaces of walls, cleaning of windows/ventilators glass panes & applying one coat of cement base paint complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints )

Preparation of old treated surfaces (plastered or unplastered) of wall cornices etc upto tripple storey bldgs by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots old treated plastered surfaces of walls, cleaning of windows/ventilators glass panes & applying two coat of cement base paint complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint)

Material & Labour Preparation of old plastered or newly plastered surfaces of walls any apply two coat of white wash on walls upto tripple storey bldgs including cleaning of windows/ventilators glass panes complete all as spd and directed.

Material & Labour for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls upto tripple storeys bldg complete all as specified and directed.

Material & Labour for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling upto tripple storeys bldg complete all as specified and directed.

Material & Labour for Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)

Material & Labour for Preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in and with PVC rigid conduits in concealed with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for & Make: Anchor/Havells/Polycab

(a) One light point controlled by one 5 Amps SP switch

(b) One ceiling fan/ Exhaust point controlled by one 5 Amps SP switch

(c) One 5 pin 5 Amps socket outlet on same board

(d) One 5 Pin 5 Amps socket outlet on independent board

(f) One light point controlled by two 2-way switch

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

All as per items above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.Make: Anchor/Havells/Polycab

Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixing Modular switch piano type, flush button single pole, one way 6 amps complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixing switch piano type, flush button single pole, two way 5 amps complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixing switch piano flush button, 15 Amps, single pole one way complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixing Modular switch piano type, flush button single pole, one way Module 16 amps complete all as specified and directed. Make: Anchor/Havells/GM

Material & Labour socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

Material & Labour Socket, 6A - 2/3 pin combined 2 module, type complete all as specified and directed.Make: Anchor/Havells/GM

Material & Labour socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed. Make: Anchor/Havells/GM

Material & Labour Socket 6A/16A - 2/3 pin combined 2 module type complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixingixing inreplacement of for ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixing inreplacement of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings, Make: Anchor/Havells/GM

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type & Make: ABB/L&T/Legrand

(a) 08 ways

(b) 04 ways

Supply & Fixing of MCB SPN/TPN in the DBs catered above of the following ratings and Make: Anchor/Havells/Polycab

(a) MCB SPN 40 to 63 Amp

(b) MCB SP 6 to 32 Amp

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Material and Labour for Submain wiring with two run of single core 2.5 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 2.5 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit, and Cable will be issued under Sch 'B' store.

Material and Labour for Submain wiring with two run of single core 4 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 4.0 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit, and Cable will be issued under Sch 'B' store.

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and neutral and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge. Make: ABB/L & T/Legrand

Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 150mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Supply and Fixing inreplacement LED tube light 16/18/20/22 watt, 4 feet long all as per directed by Engr-in-Charge.

Supply and Fixing inreplacement LED tube light 10/12 watt, 2 feet long all as per directed by Engr-in-Charge Make: Anchor/Havells/Phillips

M/s Ajay kumar Garge

m/s sharma constructions

naveen enterprises

SHREE BALAJI TRADING CORPORATION

Choudhary Traders and Engineers

THE SHIVAM ENTERPRISES

Haritwal traders