Spl Rep to Toilet Block at Drill Square, Roof Treatment, Joinery and allied items in GCs Kitting Shop, MT Office P-79 and QM Complex P-39 at OTA Gaya

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling of machine pressed precast concrete interlocking paver block of any shape and size and laid dry or laid dry and pointed in floors or aprons complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store.

Dismantling water tanks of capacity exc 500 & not exc 1000 litres and removing to store.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Taking down and refixing of 15 mm dia Bib taps/Stop valves/Angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.

M & L for providing 75mm thick cement concrete type C-1, 1 : 3 : 6, (using 20 mm graded stone aggregate) as in flooring using water proofing compound complete all as specified and directed.

M & L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed.

M & L for rendering 15mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cementand finished even and smooth (without using extra cement) complete. (Note:- WPC shall be measured and paid seperately)

Supply only Liquid waterproofing compound (Make : Sika Latex Power)

M & L Vitrified tiles double charge light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not less than 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

M & L for machine pressed chequered cement concrete tiles 30cm x 30cm x 30mm thick with grey cement and pigment including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Laying of machine pressed precast concrete interlocking paver block any shape and size (except tiles) with sand cushioning at same or other location with proper slope complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings on walls/ceilings or in floors including necessary cutting/chasing of walls and floors complete all as specified and directed.

S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F 1000 litres capacity white rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multilayered hoisted and fixed in position complete all as specified.

S & F 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S & F in repair 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed.

M & L for providing cement concrete type B0, 1 : 2 : 4 (using 12.5 mm graded stone aggregate) as in coping and the like including weathering, slightly rounded or chamfered angles and throating using water proofing compound complete all as specified and directed (Note:- WPC shall be measured and paid seperately)

M & L for 2 mm thick of Birla white putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings complete all as specified and directed.

M & L for preparing new plastered surface of wall and applying two coats of distemper oil emulsion white or tinted over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparing old plastered surfaces of wall and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed.

M & L for preparing old plastered surfaces of ceiling and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed.

M & L for preparing newly plastered or previously untreated walls surfaces or fascia or roof or chajjas and applying two coats of cement base paint white or tinted over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing old decorated walls surfaces or fascia or roof or chajjas and applying one coat of cement base paint white or tinted complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. Make : Jaguar/Hindware 1st quality

S & F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete. Make : Jaguar/Hindware 1st quality

S & F in repair white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware)

S & F in repair brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete all as specified and directed. (Make : Jaguar/Hindware)

S & F in repair vitreous China Urinal, Half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete. Make : Jaguar/Hindware 1st quality

S & F urinal spreader of any colour for fixing with 15 mm dia pipe.

S & F Vitreuos china wash hand basin size 560x450mm oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete fixed. (Make-Hindware/Jaquar 1st quality)

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete.

S & F in repair 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. (Make :Saint Gobain/ModiFloat)

S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in repair 15 mm dia bore fancy type chromium plated two way bib taps, cast copper alloy with crutch or butterfly handle screwed down, high pressure, screwed both ends for iron pipe or for unions.

S & F in repair 15 mm dia bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy type for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete.

S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, and solvent cement laid in trenches or in floors and connecting with manholes or disposal place.

S & F 110mm dia bore PVC (SWR) bends with rubber ring joint and solvent cement with access door all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl with rubber ring joints, and solvent cement fixed to pipes all as specified.

S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with rubber ring joints and solvent cement with acess door complete.

S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to rough finished surfaces of concrete flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete all as specified and directed.

M & L for cement concrete type D-2, 1:4:8 using 40mm graded stone aggregae as in foundations, filling and mass concrete complete.

M & L for providing precast cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in manhole covers including setting in cement mortar 1:4 complete all as specified and directed.

M & L for 20mm thick granite (Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like including cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for rendering 10mm thick internal surfaces on brick work in cm 1:3 as in ceiling and finishing surfaces even and fair without using extra cement complete.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames).

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frames).

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified and directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or beeding complete all as specified and directed.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed.

S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing.

S & F pressed steel frames for doors of size 105mm x 60mm made of 1.25mm thick steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S & F 35 mm thick flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc.

S & F 300mm long aluminium alloy, anodised cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts complete all as specified.

S & F stainless steel butt hinges, medium weight cold rolled of size 100 mm.

S & F 150 mm long anodised aluminium handles, cast type D shape complete.

S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 with WPC as per manufacturer instruction complete.

M & L for preparation of new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

-Ditto- all as per item No 76 above but one coat synthetic enamel paint on old steel surfaces of any description complete.

M & L for preparation of new or previously untreated wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

-Ditto- all as per item No 78 above but one coat synthetic enamel paint on old wooden surfaces of any description complete.

M & L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membrane comprssing of following for non-approachable roof:- (i) Removal of existing roof treatment and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membrane with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction/specification.

M & L for preparing old plastered surfaces of wall and applying two coats of white wash complete all as specified and as directed.

M & L for preparing old plastered surfaces of ceilling and applying one coat of white wash complete all as specified and as directed.

S & F mild steel TMT bars 5mm dia and over upto and including 10 mm dia, cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl MS wire not less than 0.9mm dia in stirrups, spacers and binders complete as all specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete.

S & F 25 mm thick bituminous filler board as in crumple Joints complete.

S&F anodised aluminium snap grid frame work of size (605 x 605mm) for false ceiling all as specified and directed.

S&F 0.63mm thick plain, black, mild steel sheeting as in crumplet joints stragight flashing (length and girth as fixed)

Taking down carefully complete fittings and fixtures such as , light fittings, sockets , exhaust fan etc., removing materials to store, or keeping in safe custody for re-use at site or offering credit, and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Crompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20W or its equvalent in Philips, Havells.

Supply and fixing in replacement of non- metallic range PVC Body Ventilation fans of 200mm sweep ,Energy saving fans ,230V AC ,50 HZ Completed. Make :- Havells, Crompton Greaves, Usha Note :- Old UNSV exhaust fan deposit to MES Store.

M&L in replacement of modular metal flush box for 3 module (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular white cover plate with frame 8 module (Make-Crabtree/legrand/Indo Asian (Glint))

S & F in replacement of Modular switch piano type 10 Amps one way single pole 240 volts A.C complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F in replacement of Modular switch piano type 20 Amps complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F in replacement of modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

Supply and fix MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed.

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

M&L of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16 sqmm 2 core Make-Polycab/Havells/KEI

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.

Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as spfd & directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L for natural local river sand for cable protection.

M&L for GI tubing 40 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge.

M&L ceiling rose , 3 terminal polycarbonate complete all as specified and directed. Make: Anchor/ Havells/ Philips

M&L for point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI Marked complete concealed in wall with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor complete area in same specification as per existing all as specified and directed.

(a) One light/fan/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps independent board.

(c) One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No.109.03 here-inbefore but 3/5 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

Supply and fix switch piano flush button single pole one way 5 amp.

Supply and fix ceiling rose surface bakelite 65x50mm 2 to 3 terminal

M & L for Socket outlet 2 in 1 , 5 pin, 6 Amps flush type.

M & L for Switch Socket combination 2 in 1 , 5 pin, 6 Amps flush type.

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S &F switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 4 sqmm copper conductor is measured as one unit.

Labour only for refixing the celing fan taking down & including with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed at site.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M&L for replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 100Amp capacity and 12 Nos+ 12 Nos Out going MCB SP complete all as specified and directed. Make : Havells/ L&T/Legrand NOTE:- MCCB & MCB's are measured and paid in separate items and same make.

S&F in replacement of MCCB 4 pole, 100Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

Supply & fixing SRCD DBOXX (socket residual current device) protected socket with steel enclosure of 25 Amp Capacity complete with all accossries and commissioning all as specified & directed by Engr-in-charge.

S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16 sqmm 4 core.

M&L for replacment of Sheet metal enclosure MCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door with suitable for 100 Amp MCCB incoming IP 42 Protection & 04 Nos Out going MCB SPN up to 40-63 Amp complete all as specified and directed. Make :Havells/ L&T/Legrand NOTE:-MCCB & MCB's are measured and paid in separate items and same make.

S&F in replacement of MCCB 4 pole, 100 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

M&L in replacement of AC wiring Concealed/surface wiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 4 sqmm and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 20 mm external dia and conduit accessories of ISI marks medium grade including 2.5 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make : Polycab /Havells/ Plaza . Note:- One run of conduit two run of 4 sq mm copper conductor & one run of 2.5 sq mm copper conductor is measured as one unit.

S&F fixing ceiling fan complete with electronic type regulator and all accessories 230V, 1200 mm sweep, BEE 5 star rated

Supply and fixing in replacement of metal Exhaust fans 300mm sweep ,Energy saving fans ,230V AC ,50 HZ Completed.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area35 sqmm 3.5 core Make-Polycab/Havells/KEI

M/S CHAUHAN CONSTRUCTION

M/S SURYA BUILDERS

M/S PANCHAM RAI SONS